Seismic
earthquaking event with a wave velocity 3-8 km/s.
See Also: Seismometers, Seismic Arrays, Seismic Accelerometers, Earthquake, Geophones, Shear Wave, Wave
-
Product
GEOPHYSICS, SEISMIC, and ATMOSPHERICS RESEARCH RECEIVER
Type RAS-1
-
Called the RAS-1, the receiver is designed for ultra low and very low frequency scientific research work, including the exploration of low frequency emissions due to seismic and earth-quake activity, study of atmospheric phenomenon such as "whistlers", and low frequency Sudden Ionospheric Disturbance (SID) and electromagnetics phenomenon. The RAS-1 will receive signals from under 200 Hz. To over 250 KHz in both narrow bandwidth modes as well as broad badnwidth reception.
-
Product
Minimus Digitisers
-
Minimus digitisers offer advanced 'smart' 24-bit seismic ADC conversion and are packed with a host of features that make them the ideal 'plug-and-play' solution for rapid deployments and multi-scale networked arrays.
-
Product
Signal Analysis
Modal Analysis
-
Modal Analysis is used for analyzing pulse and transition characteristics of signals coming from the input channels of FFT spectrum analyzers and seismic stations in real time or recorded time realization view mode.
-
Product
Seismic Acquistion QC Serivices
-
Overall data quality / cost monitoring / safety / daily reporting to client. Verif-i provides technical and operational programme assurances for seismic surveys conducted for the company. The lead acquisition QC on-board/on-crew the seismic vessel/block accepts or rejects data on behalf of the company. Our representative will assist the contractor in fulfilling the technical and operational requirements of the seismic programme and report on crew activities.
-
Product
Linear Accelerometers
-
Columbia Research Laboratories
Columbia Research Labs line of Force Balance Linear Accelerometers offers low cost, high performance, general purpose single axis accelerometers that are ideal for DC and low frequency measurements, with both voltage and current signal outputs available. Also offered are Columbia's Solid State Sensors and our specialized Airborne Sensors that generate outputs specifically designed to operate from +24 to +32VDC aircraft power, that is excellent for airborne telemetry applications. And our Low Noise Sensors are designed for use in seismic, low level, low frequency motion studies.
-
Product
Bridge Monitoring
-
Structural Health Monitoring of BridgesDewesoft data acquisition systems are used in structural health and seismic bridge monitoring projects ranging from structural mechanics to continuous monitoring of large, complex structures. The systems provide distributed, high-channel-count and remote monitoring for highway overpasses, roads, buildings, and bridges.
-
Product
AGH Hydrophones
-
Teledyne Marine AG Geophysical Products
Primarily used with seismic source firing and control systems where the hydrophone is operating in close proximity to, or in the high pressure explosive force field of a seismic source.
-
Product
Seismic Detection System
-
For the purpose of increased reliability and unification, the seismic detection system is delivered as a standard kit placed inside of the compact leak-proof casing.
-
Product
Services
Device Manager
-
ZET Device Manager provides the user with detailed information about all connected ZET devices (spectrum analyzers, strain-gauge stations, seismic stations, ADC/DAC boards, digital sensors).
-
Product
Multi-Cluster Sources
-
Our complete line of sources can be configured in a Tri-Source configuration. Clustered sources are a vital part of effective seismic exploration. The destructive effects of the air blast associated with a discharging air source are made worse by clustering. In order to maintain the separation between air sources within a cluster, it is necessary to mechanically constrain the sources with rigid bars.
-
Product
Automation
Signal Filtration
-
Signal Filtration is used for filtering signals coming to the input channels of spectrum analyzers, strain-gauge stations, and seismic stations, for further processing by ZETLAB programs. Signal Filtration can also be used for processing virtual channels created by such programs as Vibration Meter, Strain-Gauge Sensor, etc. Signal Filtration operates with signals both in real time and with reproduced of recorded signals.
-
Product
COM Express Type 6 Basic Module With 5th Gen Intel® Core™ I7 & 4th Intel® Core™ I7/i5/i3 & Celeron® Processor And Intel® QM87
CEM880
-
The CEM880 COM Express Type 6 basic module features 5th generation Intel® Core™ processor (H-processor line), one onboard 4 GB extended temperature DDR3L chip, and one 204-pin SO-DIMM DDR3L socket supporting up to 8 GB. With outstanding computing performance, low power consumption, wide temperature range, and seismic design, the rugged basic-size SoM (system on module) drives Internet of Things innovation and is ideal for graphics-intensive and rich I/O applications such as telecommunication, medical imaging, digital signage, gaming machines, military, and networking.
-
Product
Certimus- Surface/Vault
-
Next generation seismic station with multi-touch sensitive LCD display and Bluetooth.
-
Product
Seismic interpretation Software
GeoTomCG
-
GeoTomCG can process crosshole or VSP seismic or radar data. The display shows calculated radar velocities. High velocity zone at depth of 27 m is caused by an abandoned mine. Other zones of contrasting velocities are geological features. S and R indicate source and receiver positions, respectively.
-
Product
Pioneer Seismic Cabinet
-
The Pioneer rack is the cornerstone of our broadcast cabinet line, offering flexibility and strength. With a weight capacity of 2,000 lbs., Pioneer’s heavy-duty frame is designed with cross braces interlocked and welded into the corner post.
-
Product
COM Express Type 6 Compact Module With Intel® Pentium® Processor N4200 & Celeron® Processor N3350
CEM313
-
The CEM313, a COM Express® Type 6 compact module, is built with the 14nm Intel® Pentium® N4200 and Celeron® N3350 quad-core/dual-core processors (codename: Apollo Lake). Integrated with Intel® Gen 9 graphics, the COM Express® type 6 module prevails in its excellent graphics performance while supporting DX12.0, OCL 2.0, OGL 4.3 with resolution up to 4K (3840 x 2160 @ 30 Hz). Furthermore, two 204-pin SO-DIMM DDR3L-1600 have been deployed in the CEM313 up to a maximum of 8 GB Overall. With the innovative design of low power consumption, wide temperature range, and seismic resistance, the CEM313 can be served as an excellent solution for graphics-intensive applications over the IIoT, including industrial control, medical imaging, digital signage, gaming machines, military, and networking.
-
Product
Seismic Signal Conditioners
-
Seismic signal conditioners are designed to accept an input from (and provide power to) a seismic sensor. They convert the signal to a proportional 4-20mA DC signal that can be used as an input to process control instrumentation such as a PLC or DCS. They provide additional convenience features such as optional displays, BNC connectors for access to the dynamic sensor signal, and bandpass filtering. Metrix offers seismic signal conditioners that can accept either acceleration or velocity sensors, and are available with or without an integral display.
-
Product
Transition Zone Acquisition
508XT
-
508XT extends its capabilities to marsh and transition zone seismic surveys by providing a dedicated solution for this challenging environment. The new equipment addresses the tough constraints of operating in shallow water areas with a reinforced breaking strength to 300 daN and a waterproofed capability of up to 25m.
-
Product
Security and Traffic Monitoring System
-
Information System Technologies Inc.
ISTI’s versatile sensor nodes can support multiple sensing types including acoustic, seismic, visible/IR, and scanning laser. Several eye-safe scanning lasers form a distributed wireless sensor network and can continuously and accurately track as well as monitor ground vehicles and personnel in a surveillance area. This system provides super-fine angular and range resolution to precisely locate moving targets. Among other key benefits are: day/night operational capability, continuous monitoring and surveillance without blind spots, 360 degrees field-of-view, large coverage area, multiple closely spaced target tracking, threat classification, and automatic alarm generation. The system can be used in applications such as traffic monitoring, intrusion detection, border control, airport runway collision and incursion avoidance, and perimeter security.
-
Product
Structural Engineering And Design
AEC
-
Altair's architecture, engineering, and construction (AEC) solutions offer unparalleled productivity for building and non-building structures with their advanced versatility, integration, and data management capabilities. Our analysis and design solutions simulate responses to a range of dynamic, nonlinear loading conditions, including wind, snow, water, seismic, blast, dead, live, and moving loads – all while ensuring design resiliency and regional code compliance.
-
Product
Long Life Serismic Energy Source
2800LLX
-
Bolt introduced the LONG-LIFE air gun in 1992. Since then it has become the standard energy source for marine seismic exploration.
-
Product
High-performance Impulsive Source
G-SOURCE II
-
G-SOURCE II is the most advanced impulsive source of its class, bringing high performance in the toughest conditions. Its compact size, easy adaptability and strong performance through a higher peak amplitude than any conventional impulsive source, make it perfect for any advanced marine seismic survey.
-
Product
Very Broadband Borehole Systems
-
Borehole installations offer excellent performance for low-noise detection of weak seismic signals such as from local microseismic events or from regional/teleseismic earthquakes.
-
Product
Accelerometers
-
Columbia Research Laboratories
The force balance accelerometer has a classical critically-damped, second-order frequency response. There is no peaking in the response but simply a smooth roll-off above the natural frequency. This property along with the excellent characteristics of the "HP" torquer design makes Columbia accelerometers the best choice for demanding applications where precise DC and near-DC measurements are needed in demanding shock and wide band vibration environments. Columbia force balance accelerometers are available to cover virtually all applications. Low noise, high output units can be used for seismic structure motion studies while miniature, high range versions are optimum for measuring more violent high G environments encountered in many industrial, aircraft and missile applications.
-
Product
Sparse Nodal Solution
MicrOBS
-
MicrOBSNT is an ocean bottom node solution for seismic refraction and reflection surveys.
-
Product
Ultra Rugged Cabinet
M2 Series
-
M2, Military and Seismic Ready Cabinets have been lab and field tested for use in harsh deployment events. The M2's double walled extrusion offers the highest strength-to-weight ration design available.
-
Product
48-Channel Seismometer
FlashSeis48
-
ZZ Resistivity Imaging Pty. Ltd.
48 channel seismic data acquisition system.
-
Product
Seabed Nodal Solution
GPR
-
GPRNT is an innovative seabed nodal solution based on Sercel’s leading-edge QuietSeis® technology meeting the very latest seismic industry expectations for performance. The unrivalled digital fidelity and ultra-quiet performance provided by the QuietSeis MEMS sensor ensure a step change in seismic data quality.
-
Product
Seismic Analysis Software
-
GeoSonics announces our latest software suite. AnalysisNET is the most comprehensive and advanced software for GeoSonics 3000 Series seismograph. The software combines Seismic Analysis and Event Manager software in a single package that employs the .NET framework. AnalysisNET allows easier access to data files provides multiple report combinations and gives you the ability to manage your data.
-
Product
Environmental Simulation Testing
-
MET's Environmental Simulation Labs, on both coasts, employ numerous environmental chambers, including several large walk-in chambers. Hydraulic and electro-dynamic shakers are used for a wide range of vibration testing, from ISTA packaging to seismic compliance testing. MET's hydraulic vibration systems are capable of full level (Zone 4) seismic simulation.
