Product

Continuity of Insulation Tester (High Voltage Method)

ZGQ-16B

-

Shanghai Dean Electrical Co., Ltd

ZGQ-16B - Shanghai Dean Electrical Co., Ltd

Executive standard: GB/T4074.5-2008/IEC60851-5;Inspection standard: JB/T4279.13-2008Meet GB/T6109-2008 standard requirementsUsed to test the Insulation continuity (namely the pinhole number of enameled wire sample per unit length) of enameled round wires with nominal conductor diameter ranging from0.05mmto1.60mm;8 level test voltages can be selected by pressing button: 350V, 500V, 750V, 1000V, 1500V, 2000V, 2500V and 3000V;Test length ranging 0～99m;Application of SCM control.Automatically complete test process, display wire testing length and pinhole number;Brushless driving motor, guide pulley and take up pulley are equipotent.The electrode insulation to ground, using high resistance material of non-hygroscopic, no leakage, no tracking, easy to clean, Insulation thickness can ensure long-term 3000V voltage effect.Circuit board is subject to anti-static and moistureproof and long-time aging treatment, has more stable quality and higher durability;

Product

DC Voltage Test System

-

HIGHVOLT Prüftechnik Dresden GmbH

HIGHVOLT Prüftechnik Dresden GmbH

DC test systems are used to test components and complete systems found in electrical power supply systems and operating on DC voltage.

Product

Vacuum Pressure Sensors

-

MKS Instruments

MKS Instruments

MKS, Granville-Phillips® Vacuum Gauges & Sensors cover a broad spectrum of vacuum measurement solutions.

Product

High Voltage Amplifier

HA-400

-

PINTEK Electronics

HA-400 - PINTEK Electronics

*400Vp-p(±200V DC) *160mAp-p(±80mA DC) *Bandwidth: ≦600KHz(200Vp-p) *Slew Rate: 300V/us *Gain(AMPL): 0~90(10 Turn VR) *DC Offset: ≦0~±200V (10 Turn VR + SW) *Output Resistor: 50Ω

Product

Socket Wrench Torque Sensor Rotating Type

RSS SERIES

-

Transducer Techniques, Inc

RSS SERIES - Transducer Techniques, Inc

Our RSS Series rotating socket wrench torque sensors are available in ranges from 10 ft-lbs. through 250 ft-lbs. and provide accurate measurements of bolt or nut wrenching torques. These sensors are bi-directional so both tightening and break-away torques can be measured. Unlimited rotation of the ball bearing supported sensor shaft allows monitoring of the total fastening cycle. The sensing element incorporates bonded foil strain gages of the highest quality, along with coined silver slip rings and two silver graphite brushes per ring for data transmission.

Product

Data Interfaces, Sensors And Actuators

-

Dewesoft d.o.o.

Dewesoft d.o.o.

Dewesoft also develops and manufactures data interfaces such as CAN USB devices, GNSS and INS positioning devices, and Inertial Measurement Units (IMU), and high-speed cameras. All devices are completely compatible and synchronized with all of our Data Acquisition (DAQ) systems and offer the same highest possible built quality. To complete the measurement chain we also provide high accuracy current and vibration sensors.

Product

Hall Effect DC Current Sensor

CYHCT-WS3

-

ChenYang Technologies GmbH & Co. KG

CYHCT-WS3 - ChenYang Technologies GmbH & Co. KG

The sensor CYHCT-WS3 is a Hall Effect sensor for the measurement of DC current. The sensor has agalvanic isolation between the high power primary conductor and the secondary electronic circuit and withdifferent output signals and different power supplies.

Product

Spring Loaded LVDT Position Sensors

-

NewTek Sensor Solutions

NewTek Sensor Solutions

Gage head LVDTs are ideal for industrial environments requiring a reliable and rugged sensor.  With near infinite resolution and excellent repeatability, these spring-loaded LVDTs are ideal for quality testing and gaging with several customization options available.

Product

Split type AC Current Sensor

CTF-400A

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CTF-400A - MULTI MEASURING INSTRUMENTS Co., Ltd.

* Suitable for current measurements of main cable. * Wire stopper is equipped for the slipping protection. * The special connector is not necessary as the output terminals are provided. * Open circuit protection and nonflammable plastic material.

Product

Vibration Sensor

-

Fluke Corporation

Fluke Corporation

Remotely monitor the health of your equipment with 3560 FC Vibration Sensors. Obtain real-time vibration measurements through the Fluke Connect® Cloud via Fluke 3502 Gateway. Measuring imbalance and misalignment these sensors provide an early warning for equipment and sends alarms through the Fluke Connect Condition Monitoring software to a desktop or smartphone. This product requires a 3502 FC Gateway and Fluke Condition Monitoring software. Package comes with 10 sensors.

Product

PC/104 8-Channel Smart Sensor Interface

518

-

Sensoray Co., Inc

518 - Sensoray Co., Inc

Measures thermocouples, RTDs, strain gages, thermistors, 4-20 mA, voltage and resistance 8 high-accuracy differential input channels Integral sensor excitation Exclusive pulsed excitation minimizes sensor self-heating Configurable sensor type per channel Fully electronic calibration Low power

Product

Heat Flux Sensors, Thermal Flux Sensors

-

Wuntronic GmbH

Wuntronic GmbH

Heat Flux Sensors, Thermal Flux Sensors

Product

Cell Voltage Monitor

N1200 Series

-

Next Generation Instrumental (Shanghai) T&C Tech. Co., Ltd.

N1200 Series - Next Generation Instrumental (Shanghai) T&C Tech. Co., Ltd.

N1200 series fuel cell voltage acquisitor is specially developed by NGI for fuel cell R&D and production. It is with compact size, high integration, high reliability and fast data transmission. N1200 standalone supports up to 200 channels. More channels can be tested simultaneously under cascade mode. Voltage acquisition range is from -2.5V to +2.5V, which completely covers the voltage range of fuel cell. Real-time voltage data of total 200 channels can be uploaded within 10ms by adopting 100M Ethernet communication. N1200 PC application software supports platform-based test applications, which allows users to customize test files based on the test requirements and process.

Product

Medium Voltage Drives

-

Yaskawa Electric Corporation

Yaskawa Electric Corporation

Target markets include Oil and Gas, Water and Wastewater, Power Generation, Rubber and Tire, Mining, Cement and other industrial applications. They can be applied equally well to applications requiring Constant Torque (CT) output performance as well as the traditional Variable Torque (VT) pump and fan loads.

Product

MIPI I3C Sensor Controller

I3C

-

Arasan Chip Systems, Inc.

I3C - Arasan Chip Systems, Inc.

The main purpose of MIPI I3C is to standardize sensor communication, reduce the number of physical pins used in sensor system integration and support low-power, high-speed and other critical features supported by I2C and SPI.

Product

Sensor Evaluation Kits

-

Panasonic Industrial Devices Sales Company of America

Panasonic Industrial Devices Sales Company of America

Accelerate prototyping and testing by utilizing Panasonic's Sensor Evaluation Kits for all your design needs. Discover today why Panasonic Sensors are the premier choice for creating unique IoT solutions.

Product

Light-to-Digital Proximity Sensors

-

Renesas Electronics Corp.

Renesas Electronics Corp.

Renesas' light-to-digital proximity sensors offer low light sensitivity, superior proximity range performance, low power consumption, easy to use simple output algorithm, and an array of other features including intelligent interrupt, sleep modes and Time of Flight (ToF) signal processing.

Product

High Voltage Breakdown Test Sets

HT-Series

-

Lumetronics

HT-Series - Lumetronics

Dielectric Voltage Withstand Test or High Potential Test (HIPOT test) is a 100% production line test to verify the quality & electrical safety characteristics of products.

Product

Pipe-mountable Liquid Level Detection Sensor

EX-F1

-

Panasonic Industrial Devices Sales Company of America

EX-F1 - Panasonic Industrial Devices Sales Company of America

The EX-F1 Pipe-Mountable Liquid Level Detection Sensor can not only be easily mounted onto a pipe with just tying bands, but it requires minimal mounting space thanks to its' built-in amplifier and compact size. Positioning can also be easily changed with the release lever even after mounting.

Product

Solid State Voltage Injector

J2110A

-

PICOTEST Corp.

J2110A - PICOTEST Corp.

While it is possible to obtain high quality injection transformers with bandwidths as wide as 1Hz to 5MHz or more, in some cases this is still insufficient for some tests. For example a typical heater control loop might have a bandwidth of less than 1Hz while some linear regulators and opamp circuits can have bandwidths of up to 100MHz or in some cases even higher. For these applications, a solid state injector can provide the necessary bandwidth. A solid state injector can perform at DC, while the upper frequency limit is dictated by the components selected and the printed circuit board material and layout. It is possible to obtain a solid state injector with a working range of DC – 200MHz, though above 50MHz the interconnection between the injector and the circuit being tested can become quite critical. It is essential that ripple from the injector power supply does not dramatically degrade the dynamic range or the signal to noise ratio of the measurement. The resulting plots are often much cleaner when using a solid state injector than with a transformer injector.

Product

RF Power Sensor Solutions

-

Bird Technologies

Bird Technologies

Bird provides innovative power sensor solutions for all types of RF applications. From simple directional power sensors for the measurement of transmitter output power and VSWR measurement and monitoring applications, to highly accurate self correcting power sensors for process control applications, you can rely on Bird sensor products to meet the needs of your unique applications.

Product

OMNIR: On-Line Near Infrared Sensor

-

Finna Sensors

Finna Sensors

OMNIR is the future of near infrared moisture sensing technology. Coming from OMNI, meaning “all” and NIR, meaning “near infrared,” Finna Sensors has created an intelligent all-sensing solution that exceeds expectations. It not only delivers accurate data instantaneously and non-destructively, it also monitors its own health to perform its best during your crucial processing moments. By selectively harnessing light, to ensure increased uptime and greater profitability for your operation, the future of your manufacturing operation starts now.

Product

RMS Averaging Vibration Sensor

SQ-SVS

-

SignalQuest

SQ-SVS - SignalQuest

The vibration sensor module performs calibrated averaging (root mean squared) vibration measurement with analog voltage and digital serial outputs.  Because acceleration signals are extremely fast by nature, they require high speed sampling and computationally intensive processing to measure.

Product

Peak and Average Power Sensors

E9320 Series

-

Keysight Technologies

E9320 Series - Keysight Technologies

- Operates with the EPM-P series and P-Series power meters- 300 kHz, 1.5 MHz and 5 MHz video (modulation) bandwidths- Provides peak and average power measurements- Calibration factors stored in EEPROM- Fast measurement speed over the GPIB (up to 1,000 readings per second)- Two frequency ranges: 50 MHz to 6 GHz, and 50 MHz to 18 GHz- Wide dynamic range sensors