Visual Basic
A programming language and environment that allows rapid creation of user interfaces by dragging and dropping elements such as buttons and controls.
-
Product
Basic Contact Probes (75 Mil) F07543S064P300HP
1145256
-
The Basic Contact Probes (75 mil) F07543S064P300HP are engineered for precision and reliability in demanding environments, offering exceptional performance across a range of applications. With a pitch of 1.90 mm (75 mil) and an operational temperature range from -45°C to +80°C, these probes are designed to withstand harsh conditions while maintaining superior connectivity and functionality. The robust design incorporates high-quality materials, ensuring longevity and reliability under repeated use.
-
Product
Basic Contact Probes (75 Mil) H075WW10-10.0
1010835
-
The Basic Contact Probes (75 mil) H075WW10-10.0 are specifically engineered for precise electrical connectivity in demanding applications. With a pitch of 75 mil (or 1.90 mm), these probes are designed to accommodate a variety of connection types, ensuring reliability in your electrical setups. Featuring a continuous current rating of 4.00 A, this model is optimized for performance, making it an ideal choice for both professional and industrial use.
-
Product
Basic Threaded Probes (F722, F724, F732, F727) F72712B140G300
1021907
-
The Basic Threaded Probes (F722, F724, F732, F727) F72712B140G300 is designed for high performance in contact probing systems. Catering to precise measurements, these probes showcase a compelling design characterized by a pitch of 2.54 mm. They operate effectively within a temperature range of -45°C to +100°C, making them suitable for various environments and applications. The F727 model is built with a robust preload of 110 cN and delivers consistent performance with a continuous current capacity of 5 A. The typical contact resistance registers at an impressive 25 mOhm, ensuring reliable and efficient electrical connectivity.
-
Product
Basic Contact Probes (50 Mil) F76811B060G130
1001612
-
The Basic Contact Probes (50 mil) F76811B060G130 (Order code 1001612) are specially designed for precision applications where reliability and performance are crucial. These probes are engineered to operate effectively within a temperature range of -45°C to +80°C, making them suitable for a variety of environments. With a pitch of 50 mil (1.27 mm), the probes ensure a compact and efficient design suitable for tight spaces. Their continuous current rating of 3.00 A and a typical contact resistance of just 20 mOhm demonstrate their capability to handle substantial electrical demands while maintaining low energy loss.
-
Product
Instrumented Runway Visual Range Transmissometer System
AGIVIS 2000
-
Aeronautical & General Instruments Ltd.
AGIVIS 2000 is a transmissometer-based Runway Visual Range (RVR) system that provides the highest possible levels of accuracy. The first generation of AGI RVR systems were developed in co-operation with the UK Met Office and CAA, and AGI has been supplying RVR systems for more than 25 years. AGIVIS 2000 systems are currently operational at major international airports certified for instrument landings up to and including CAT IIIB. AGIVIS 2000 is fully compliant with ICAO, WMO and CAA requirements. The system consists of transmissometer field sites, background luminance meters, runway lighting interfaces, data processing equipment and archive storage and backup. It can drive multiple full-colour dedicated RVR displays. Systems can be supplied fully installed with comprehensive engineering and operator training, and post-installation support is available worldwide.
-
Product
Basic Contact Probes (100 Mil) F79703B100G150
1001554
-
The Basic Contact Probes (100 mil) F79703B100G150 are designed for precision applications requiring reliable and consistent electrical performance. These probes utilize a pitch of 100 mils (2.54 mm) and operate effectively within a temperature range of -45°C to +80°C. This comprehensive approach ensures that the probes not only meet but exceed standard operational criteria, providing durability and efficiency in various environments.
-
Product
Basic Contact Probes (50 Mil) F78818B060G165
1001549
-
The Basic Contact Probes (50 mil) F78818B060G165 are designed for precision applications where reliable electrical contact is essential. With a pitch of 1.27 mm (50 mil), these probes can operate in a temperature range of -45°C to +80°C, making them suitable for a variety of environmental conditions. They provide a consistent continuous current rating of 2.00 A, ensuring robust performance for demanding tasks. The typical contact resistance is remarkably low at 20 mOhm, enhancing their efficiency in electrical connectivity.
-
Product
Basic Contact Probes (100 Mil) F10014B150G200
1011007
-
Introducing the Basic Contact Probes (100 mil) F10014B150G200, engineered for precision and reliability in various applications. Designed specifically for a wide range of electronic components, these probes feature a robust construction that ensures longevity and efficient performance. With a continuous current rating of 5.00 A and a typical contact resistance of just 20 mOhm, they provide excellent electrical performance under challenging conditions. Capable of operating in temperatures ranging from -45°C to +80°C, this probe is versatile enough for both harsh and controlled environments.
-
Product
Basic Contact Probes (75 Mil) F07536B120G200
1017551
-
The Basic Contact Probes (75 mil) F07536B120G200 offer robust performance and versatility, designed to meet the high standards required in various electrical applications. Optimally engineered for precision, these probes maintain a continuous current capacity of up to 4.00 A with an impressive typical contact resistance of just 20 mOhm, ensuring reliability and efficiency in signal transmission. They operate effectively across a wide temperature range of -45°C to +80°C, making them suitable for demanding environments.
-
Product
Basic Contact Probes (50 Mil) F76806B090G130
1001610
-
The Basic Contact Probes (50 mil) F76806B090G130 is specifically engineered for precision applications, holding up to demanding electrical and thermal conditions. With a temperature range spanning from -45°C to +80°C, these probes are versatile enough for a range of environments. The robust design offers excellent performance with a continuous current capacity of 3.00 A and a contact resistance of only 20 mOhm, ensuring reliable connections in critical applications.
-
Product
Basic Contact Probes (100 Mil) F77206B180G150E13
1009365
-
The Basic Contact Probes (100 mil) F77206B180G150E13, with Order code 1009365, offer a reliable solution for diverse electronic applications, providing exceptional performance within a temperature range of -45°C to +80°C. These probes are designed with electrical specifications that include a continuous current rating of 5.00 A and a typical contact resistance of merely 25.00 mOhm, ensuring effective and efficient electronic connectivity. The essential mechanical specifications feature a preload of 20.00 cN and a spring force of 150.00 cN, which facilitates precise operations with a nominal travel of 4.00 mm and maximum travel of 5.00 mm. Furthermore, the probes exhibit an impressive pointing accuracy of +/- 0.08 mm, making them an ideal choice for applications requiring meticulous precision.
-
Product
Basic Contact Probes (100 Mil) F58806B150G200
1092096
-
The Basic Contact Probes (100 mil) F58806B150G200 are designed for precision and reliability in a variety of applications, with critical specifications that ensure optimal performance. These probes feature a pitch of 2.54 mm (100 mil) and can operate in extreme temperatures ranging from -45°C to +80°C, making them ideal for harsh environments. With a continuous current capacity of 5.00 A and a typical contact resistance of only 30.00 mOhm, the probes ensure efficient electrical connections while minimizing energy loss.
-
Product
Basic Contact Probes (100 Mil) F10006B130G200H
1043598
-
The Basic Contact Probes (100 mil) F10006B130G200H is a high-performance solution designed for precision applications in various sectors. With an impressive temperature tolerance ranging from -45°C to +200°C, these probes are engineered to endure harsh environments while maintaining optimal functionality. The contact probes have a continuous current rating of 5.00 A and a typical contact resistance of only 100 mOhm, making them ideal for applications that require reliable electrical connections and minimal resistance.
-
Product
Basic Contact Probes F77205B180G220E18
1147636
-
The Basic Contact Probe F772 (Order code: 1147636) is designed to offer reliable and accurate performance across a range of applications. With a pitch of 2.54 mm and a temperature tolerance spanning from -45°C to +80°C, this probe is engineered for flexibility and durability in dynamic environments. The F772 features a nominal travel of 4 mm and a maximum travel of 5 mm, ensuring precise operations in various settings. Additionally, its pointing accuracy of ±0.08 mm guarantees high fidelity in measurements, making it an excellent choice for demanding tasks that require precision.
-
Product
Basic Quad J-Type Analog Thermocouple Amplifier
SEN-30103-J0
-
Analog thermocouple amplifier board based on the AD849x from Analog Devices (successor of the AD597). This quad-channel thermocouple board converts the very low voltage signal from a thermocouple to a highly-linear, 0.005V/C output with either 0V or 1.245V offset (both configurations stocked) while removing unwanted noise from the signal. Many supply and output configurations are available with this board, though the PCB was designed with Arduino in mind. Specifically, the output header will plug directly into a standard Arduino Uno or Mega, with a pin-for-pin match for power supply, ground and analog outputs. With a 5V Arduino, temperatures from 0C to 1,000C are possible with the 0V offset board and -249C to 750C with the 1.245V offset board. If using a 3.3V microcontroller (Due, etc), the board must be supplied with no more than 3.3V to avoid damaging the microcontroller. Temperature measurement range is dependent on the supply voltage. It is possible to supply the board with higher voltages to allow temperature measurement over the entire operating range of the K-Type and J-Type thermocouples, allowing use with more capable data acquisition equipment.
-
Product
Basic Contact Probes (75 Mil) H701WW
1001839
-
The Basic Contact Probes (75 mil) H701WW is designed for precision and reliability in various electrical applications. Featuring a wire wrap connection type, these probes are tailored for exacting standards, making them ideal for use in various technical environments. This model not only meets stringent design requirements but is also constructed with meticulous attention to detail, ensuring optimal performance.
-
Product
Basic Contact Probes (75 Mil) F07514S120L100
1109249
-
The Basic Contact Probes (75 mil) F07514S120L100 are engineered for precision and reliability in various industrial applications. With a design that allows for both high performance and versatility, these probes operate effectively across a temperature range of -45°C to +80°C, making them suitable for extreme environments. The smart engineering ensures a typical contact resistance of just 20 mOhm, facilitating efficient electrical connections while supporting a continuous current of up to 4.00 A.
-
Product
Basic Contact Probes (75 Mil) F07521S064L100
1017297
-
The Basic Contact Probes (75 mil) F07521S064L100, with order code 1017297, are designed for versatility and reliability in various applications. With a pitch of 75 mil (1.90 mm), these probes are capable of operating at extreme temperatures ranging from -45°C to +80°C, making them suitable for harsh environments. The engineering behind these probes ensures a continuous current capacity of 4.00 A and a typical contact resistance of just 20 mOhms, which together enhance their performance and longevity in electronic testing and connection applications.
-
Product
Basic Threaded Probes (F175, F176) F17521S064L150
1017296
-
The Basic Threaded Probes (F175, F176) F17521S064L150 are designed for precision applications in varied industries where reliability and accuracy are paramount. With a pitch of 1.90 mm (75 mil), these contact probes can operate within a temperature range of -45°C to +100°C, making them suitable for both extreme and controlled environments. The innovative design features a total length of 35.90 mm with a pointing accuracy of ±0.08 mm, ensuring high performance in critical measurements.
-
Product
Basic Contact Probes (40 Mil) H040CR-7.9
1000157
-
The Basic Contact Probes (40 mil) H040CR-7.9 are designed for optimal performance in a variety of electrical applications. Featuring a pitch of 40 mil (1.00 mm), these probes ensure excellent connectivity and are capable of handling a continuous current of up to 2.00 A, making them suitable for demanding environments. The H040CR-7.9 model combines engineered precision with practical usability, benefiting from a crimp connection type that guarantees a robust and reliable connection during operations.
-
Product
Basic Contact Probes (100 Mil) H100LA-7.6
1010818
-
The Basic Contact Probes (100 mil) H100LA-7.6 are designed for robust performance in a variety of applications. With a total length of 30 mm and specific dimensions that include a press ring diameter of 1.81 mm and an outer diameter of 1.68 mm, these probes ensure a secure and reliable connection. Featuring a flux-proof solder connection type, they are engineered to handle a continuous current of 5.00 A, making them suitable for demanding electrical environments.
-
Product
Basic Contact Probes (50 Mil) F11112S090L085
1001412
-
The Basic Contact Probes (50 mil) F11112S090L085 are engineered for precision and durability, making them ideal for a range of applications requiring reliable electrical contact. With a remarkable pitch of 1.27 mm (50 mil) and a temperature range of -45°C to +80°C, these probes can maintain performance even in extreme conditions. Their design incorporates a total length of 16.50 mm and a robust plunger made from steel, plated with longtime gold for enhanced conductivity and longevity.
-
Product
Basic Pulsed-RF Measurements
S97025B
-
Add pulsed-RF measurement capabilities to your P50xxA Streamline series vector network analyzer
-
Product
Basic Contact Probes (138 Mil) F77312B230G300
1001521
-
The Basic Contact Probes (138 mil) F77312B230G300 are engineered to meet the rigorous demands of various electrical applications while maintaining exceptional reliability and performance. With a pitch of 3.50 mm (138 mil), these probes can operate across a broad temperature range of -45°C to +80°C. The design, focused on precision and robustness, ensures that users can achieve consistent results in testing environments, making them an indispensable tool for engineers and technicians alike.
-
Product
Basic Contact Probes (100 Mil) F77205B200G080
1025309
-
The Basic Contact Probes (100 mil) F77205B200G080 are precision-engineered devices designed for a wide range of applications, ensuring reliability and performance in various testing environments. This model, with its optimal pitch of 2.54mm (100 mil), operates efficiently within a temperature range of -45°C to +80°C, making it suitable for different industrial conditions. With minimal typical contact resistance of just 25 mOhm and a continuous current rating of 5.00A, these probes offer excellent conductivity and durability over extended use.
-
Product
Basic Threaded Probes F73205B180G150
1007508
-
The F73205B180G150 model is a premier basic contact probe designed for reliable performance in various applications. With a robust temperature range of -45°C to +100°C, this probe ensures durability and adaptability across different environments. Its design features a pitch of 2.54 mm, making it suitable for precise measurements and dependable connections in precise electronic setups. The typical contact resistance of 25 mOhm combined with a continuous current capacity of 5A guarantees efficient electrical transmission, making it an excellent choice for intricate systems requiring accurate data logging and control.
-
Product
Basic Contact Probes (75 Mil) F07543S064L200
1017519
-
The Basic Contact Probes (75 mil) F07543S064L200, with order code 1017519, are engineered for precision and reliability in various applications. With a compact design featuring a pitch of 1.90 mm and capable of operating in extreme temperatures ranging from -45°C to +80°C, these probes are built to withstand harsh environments while maintaining optimal performance. Their robust construction ensures durability, making them ideal for demanding technical applications.
-
Product
Basic Contact Probes (100 Mil) H772LA-7.6
1036005
-
The Basic Contact Probes (100 mil) H772LA-7.6, also known by order code 1036005, are specially designed for precision and reliability in various applications. These probes are engineered with a pitch of 2.54 mm or 100 mil, ensuring compatibility with a wide range of electronic devices. With a total length of 28.00 mm and an outer diameter of 2.00 mm, they are compact yet robust, featuring a flux-proof solder connection type that guarantees optimal performance in demanding environments.
-
Product
Basic Threaded Probe (F731) F73111B060G150
1029087
-
The Basic Threaded Probes (F731) F73111B060G150 are essential components designed for precise contact in various electrical applications. With a robust design, they operate effectively over a wide temperature range of -45°C to +100°C, making them suitable for diverse environments. Featuring a pitch of 2.40 mm (94 mil), these probes deliver reliable performance under continuous current conditions of up to 5.00 A, while maintaining a typical contact resistance of just 30.00 mOhm. Their mechanical specifications include a preload of 50.00 cN and a spring force of 150.00 cN, ensuring consistent contact during operation.
-
Product
Basic Contact Probes (100 Mil) F10011B090G200H
1013006
-
The Basic Contact Probes (100 mil) F10011B090G200H, designated by order code 1013006, are engineered for precision and reliability across a variety of applications. Featuring a robust design with a basic contact probe style and a pitch of 2.54 mm (100 mil), these probes can operate effectively in extreme temperature ranges from -45°C to +200°C, making them suitable for environments that demand high durability. The construction utilizes high-grade materials such as beryllium copper for the plunger, ensuring excellent conductivity and resilience, while the gold plating further enhances performance by reducing contact resistance to a mere 100 mOhm.
