Filter Results By:

Products

Applications

Manufacturers

Power

a measure of watts in electricity and radiant energy in optics.

See Also: Power Quality


Showing results: 1951 - 1965 of 10974 items found.

  • ​Omnisens Securing Power Cable Integrity

    https://www.omnisens.com/uploads/1/2/0/5/120592129/published/omnisens-cobra-logo-white-2014-06-10.png?1546958203 - Omnisens

    In both underground and subsea cables incipient faults often result in temperature events. Using optical fibers integrated into the power cable or laid close by, Distributed Temperature Sensing (DTS) helps detect changes and faults allowing the operator to intervene before the cable fails. It is suitable for deployment in any cable where an optical fiber is present, including HVDC, HVAC, export, inter-array, transmission and distribution.

  • 100 Amp Intelligent Power Management

    IPMDS100 - Technology Research Corp.

    - Intelligent Power Management System- 3 - 20 Amp Single Phase Outlets- 3 - 40 Amp Three Phase Outlets- 2 - 60 Amp Three Phase Outlets- Automatic Load Shedding- 100 Amp Mil Spec Input and Output Connector- Easy Access Circuit Breakers- Phase Over Current Protection- Low Voltage Warning- Built In Press to Test

  • High Power DC Electronic Load

    IT8800 Series - I-TECH Electronic Co., Ltd

    IT8800 series has wide power range 150W~10KW, voltage and current measurement speed up to 50KHZ, resolution up to 0.1mV/0.01mA, adjustable measurement current rising speed 0.001A/us~2.5A/us, built-in RS232/GPIB/USB interface. IT8800 series has wide application fields because of its high performance products, it has been applied to LED lighting, aerospace, automotive electronics and other fields.

  • Power Inductor - Impulse Winding Tester

    19301A - Chroma Systems Solutions, Inc.

    The Chroma 19300 Impulse Winding Tester with high/low inductance test technology has 1000V of impulse voltage and a 200MHz high speed sampling rate that satisfies most power inductor test requirements for a wide range of inductance products from 0.1uH to 100uH. The built-in Area Size Comparison, Differential Area Comparison, FLUTTER value, and LAPLACIAN value functions are able to effectively inspect coils for insulation abnormalities.

  • Single Phase AC Power Source

    APS51 Series - Twintex Electronics Co., Ltd

    ★ Full range adjustable output: Low 1-150V, High 150.1~300V, resolution 0.1V★ Output frequency: 45-250Hz★ Fast output key for 110V/220V and 50Hz/60Hz★ Panel lock function★ 3 sets memories for voltage and frequency settings★ Unlimited rotary knob for voltage and frequency adjustment, minimum step 0.001★ Strong overload capacity, overload 300% within 2s★ Withstand transient current 1.5 times of rated current within 0.1s★ Response time less than 20ms for 100% load and unload★ 5 digits high accuracy LED display for voltage, current, frequency, active power, power factor★ With soft-start function, set voltage rise time (0~99.999s), avoid damage by surge current during load start-up★ Over load, over current, over temperature and short circuit protections★ RS232 interface

  • 3000 W Modular Power Supplies

    CoolX3000 Series - Advanced Energy

    Advanced Energy's reliable Excelsys CoolX®3000 series delivers an incredible 3000 W in a 300 x 131 x 120 mm package. This makes it the smallest modular, configurable, 3000 W power solution in the market. With industry-leading specifications including <91% efficiency, PMBus™ digital and analog communications and control, and a comprehensive feature set, the CoolX3000 sets the industry standard in terms of flexibility, reliability, and efficiency.

  • Rack-Mounted Power Dividers with Monitor Ports

    MegaPhase, llc

    MegaPhase now offers custom rack-mounted components for telecom testing. Pictured is a rack that includes twelve 6-way power dividers with quick-connect HPQN connectors from 678 to 2700 MHz. Each divider includes a monitor port for quick signal checks. The monitor port coupling values are typically -3.0/+2.0dB. These low loss dividers feature a minimum 17dB of isolation, phase balance of +/- 10 degrees, and amplitude balance of +/- 0.5dB.

  • Power Metering Precision Shunt Resistore

    PMS - RARA Electronics Corporation

    These components have E-Beam welded manganese-copper alloy elements giving high strength, stability and reliability. Low thermal EMF and TCR. Small size and minimal power loss. Minimal heat generation and surface temperature due to small total resistance. Proprietary processing technique allows very low resistance values. Ideally suited for KWh meters and sampling sensor shunts. These units are also suitable for custom design.

  • Portable Laser Power & Energy Meter

    StarLite 7Z01565 - mks Ophir

    *Brilliant large size TFT 320x240 display*Compact handheld design with rubberized bumpers and optimized kickstand*Choice of digital or analog needle display*Select between English, Japanese, Russian and Chinese interfaces*Analog output*Easy to use soft keys*Easy measurement configuration with context sensitive help*Backlighting and rechargeable battery*Single shot energy measurement with thermal sensors*Power averaging*Resizable Screen graphics*EMI rejection

  • High Power Switch and Bias Module

    Macom Technology Solutions Holdings Inc.

    MACOM’s High-Power Switch and Bias modules are extensively used in 4G and 5G TDD base stations as well as aerospace and defense applications. The PIN Diode Switch features high power handling, low insertion loss, and super board band performance. The integrated bias controller utilizes a boost circuit and provide the driver circuitry to the switch. The modules require only a single 5 V supply, and a single TX / RX control signal which greatly reduced the customer design complexity.

  • Power Solutions for the More Electric Aircraft

    Astronics Corporation

    The aerospace industry is experiencing a revolution with the wide-scale development of Electric Vertical Take-Off & Landing (eVTOL) and the More Electric Aircraft (MEA). These aerial vehicles, many of them unmanned (UAV), will serve a variety of service-related functions: Search and Rescue (SAR), Medivac, delivery and lift operations, aerial mapping, and of course, human transport. Astronics leads the industry with the next generation of aircraft power electronics serving this new and exciting market as an extension of our best-in-class CorePower® product line.

  • Triple Channels DC power supply

    IT6300 Series - I-TECH Electronic Co., Ltd

    IT6300 series is high-performance programmable triple channels DC power supply, each output voltage and current can be setfrom0 tomaximum rated output.This series provides series connection, parallelconnectionand synchronous functions ofchannel, which offer multi-purpose solutions forcustomerstest.IT6300 seriesis with high resolution1mV / 1mAand remote sense function,  which make the test more accurate. Withbuilt-in standard USB / RS232 / GPIB communication interface,IT6300 seriesgreatly enhance the communication speed, and customersalsocanadjust the digital step value byusing the cursorto  to facilitate the operation.

  • AC and DC 20-Amp Power Supply

    ACDC-20 - ETI Precision

    The ETI Model ACDC-20 is a rugged and portable 20-amp AC and DC power supply. Its applications include resetting circuit breaker charging motors and other general purposes. It will provide DC voltage in three nominal ranges from 0-120V, 240V, and 480V at 1.92 kVA, as well as AC voltage in three nominal ranges from 0-140V, 280V, and 560V at 2.8 kVA. The ACDC-20 is housed in a rugged plastic enclosure approximately 21.5” x 18.5” x 11.5” and weighs approximately 115 lbs.

  • Single, Double Power Cord Tester

    LX-30A+ - Shenzhen Lian Xin Technology Co., Ltd.

    Meet UL, VDE, CSA, SAA, T-MARK, KS. IRAM, CCC and other countries’ standards ..·used to test single – ends ,double –ends ,three-ends power supply cords..·Auto and continuous test in COND,Insulation Resistance ,Leakage Current, Line-to-line Hi-pot(inside HV), Leaking copper(outside HV), relative length,.·Auto test the fine and detective goods, tested qualified ones can be be ejected by ejector pin and marked , automatic cutting defective products, and alarmed with voice prompt and light,

  • Beam Directional Power Supply Mains

    SiteX CP225D - Teledyne ICM

    The CP225D is currently the most powerful constant potential X-Ray generator in ICM's portfolio. Supplemental to its outstanding penetration capacity (up to 47 mm for steel in just 10 minutes), it includes a built-in multiple X-Ray output carrousel that features a Beryllium window for the inspection of lighter alloys such as aluminum and carbon fiber. The CP225D is one of the most versatile generators on the market and will adapt to an extremely wide variety of applications. In fields as diverse as the construction or petrochemical industries, its power and small focal spot, light weight, compactness and high penetration capacity will be much appreciated.

Get Help