Web Service
-
Product
Performance Testing Services
-
Ensure your system is robust and reliable enough to handle peak loads.If your site is running slow or your system is down, you’re losing money. Using the right tools and best practices for your business, our performance engineers help to avoid system failures for websites, APIs, and mobile apps through load testing, stress testing, performance monitoring, and more. Learn more about our performance testing services below.
-
Product
QA Recruitment & Staffing Services
-
Daily our QA recruiters talk with new and existing candidates to understand their specific skillsets, experience, and personalities so that we can more accurately find a synergistic candidate.
-
Product
Services
Error Log
-
ZETLAB Error Log is used for creating and sending error logs from a spectrum analyzer, strain-gauge station, ADC/DAC module or other measuring instrument to the developer of ZETLAB software (ZETLAB Company).
-
Product
3D Scanning Reverse Engineering Services
-
Reverse engineering is oftentimes a catch-all term used for many design and engineering applications. But trust us, there is so much more to this category for the uses of our 3D scanners, portable CMMs and laser trackers. Also, reverse engineering tends to imply that the 3D scanning will be used solely for product design, when in fact it can be used to address many other engineering functions such as:
-
Product
Service Ground Test Set
900
-
TESCO’s Service Ground Test Set has been designed to check the condition of the ground connection on a secondary service. If for any reason the ground connection has a resistance, this can be immediately detected by the Test Set. The Service Ground Test Set consists of a voltmeter which can be shunted by a resistance of 60 ohms. The voltmeter is of the suppressed zero type with a double range, from 65 to 130 or from 130 to 260, and can be used for checking service voltage independently of the ground test.
-
Product
Calibration Services
-
Mors Smitt has a professional calibration center. All electrical measurement equipment can be calibrated (for example; multimeters, current clamps, temperature meters, installation testers, power meters, safety testers, etc.).
-
Product
Diagnostic and Service Units
-
- Reliable wireless data exchange for mobile machines- Real-time diagnosis via CODESYS programming system- Data display and storage via internet portal- Display and processing of position and route data- Different interfaces for integration into the machine network
-
Product
Mobile App Testing Services
-
Alphabin Technology Consulting
Boost the dependability and creativity of your mobile app with our top-notch mobile app testing practices that guarantee user trust.
-
Product
Cloud Service
Insight
-
Insight cloud service further empowers architects and integrated design teams with centralized access to building performance analysis data and advanced simulation engines.
-
Product
Service
-
Technically trained sales engineers and service technicians provide comprehensive support at every level of business. From the design and research stage, to model selection we give you support well beyond the delivery and warranty period. With multiple Service Locations nationwide and sophisticated remote support tools we are able to help you no matter where you are.
-
Product
In-Line Spectroscopic Ellipsometer for Web Coater and Roll to Roll Systems
UVISEL
-
The UVISEL Spectroscopic Phase Modulated Ellipsometer is a turn-key thin film metrology instrument for in-line measurement of thin film thickness and optical properties. It features rapid measurement capability with data acquired every 50 ms for powerful control of thin film uniformity across the entire web.The design of the UVISEL ellipsometric heads allows simple integration into roll-to-roll systems, while the software provides advanced communication capabilities suited to roll-to-roll production.
-
Product
Web Sensor
T3511P-4
-
Humidity, temperature probe on a cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.
-
Product
Software Testing Services
-
Keytorc Software Testing Services
Keytorc provides management and technology consultancy services that ensure high quality commissioning of software products by making use of the best methodologies in testing services since 2005.
-
Product
Test Services for EMC Compliance and Safety
-
Parker Chomerics offers a wide variety of EMI/EMC and safety testing for regulatory compliance. Tests include FCC, EC, VCCI, IEC 1000 (formally 801) EN 61000 Series, CISPR, Austel, MIL-STD-461 and EU regulations
-
Product
Embedded Services
-
Firmware Development (Boot/HAL/BSP), Device Driver Development (USB/PCIe/SATA), Diagnostic software Development, Application software Development, Algorithm Development, OS: RTOS, Linux, Android, VxWorks, Kernel Porting, Optimization, debugging and Benchmarking, Processors: ARM, 8051, ARC, Languages: Assembly, C, C++, Java, Scripting: Perl, Python, C Shell Scripting
-
Product
Customer Services For Testing Solutions
-
At AVL, we understand the importance of the availability and usability of test equipment throughout the entire product life cycle. We aim at reducing total cost of ownership, increasing technical availability, and securing measurement data quality of test equipment. In this way, AVL Customer Services help to avoid unplanned testing cost, reduce test repetitions, and achieve meaningful testing results.
-
Product
Services
-
MacArtney offers an extensive range of service solutions and packages to product and system clients around the world. From accurate sensor calibration performed by highly trained oceanographic specialists, through advanced hydrostatic pressure testing and expert workshop services to complete training and service programmes for operators of MacArtney CORMAC and MERMAC winch and handling systems - MacArtney has a solution that can sustain and increase the value, efficiency, performance and lifetime of your specific system.
-
Product
Test Engineering Services
-
What better place to seek advice on an RF or microwave test challenge than from a recognized leader? There's a good chance that the broad and diversified background of our engineering staff has faced similar challenges and can recommend a solution to the problem you are facing.
-
Product
Web Sensor
P8552
-
The devices are equipped with two connectors for connection of the temperature and humidity external probes and three binary inputs for two-states signals. The dry contact or two-state voltage signal can be connect to the binary input.
-
Product
Electronic Component Testing Services
-
New Jersey Micro Electronic Testing, Inc.
NJMET is proud to provide procurement and testing services to the commercial, military, aerospace, industrial automotive and medical industries. We also provide custom engineering consultation services. NJMET Inc. is AS9100/ISO9001:2008 certified and has recently successfully completed of The Defense Logistic Agency’s (DLA) laboratory suitability assessment and is qualified to test federal stock classes (FSC) 5961 (Semiconductor Devices) and FSC 5962 (Microcircuits) to DLA’s QTSL test requirements.
-
Product
Calibration Services
-
Tempsens Calibration Centre is an independent unit of Tempsens instruments (I) Pvt. Ltd. We have calibration laboratories at Vadodara (Temperature Range for Contact Type Sensors -196 to 1600 deg C and for Non-Contact Type Sensors 50 to 1700 deg C) and Bangalore (Temperature Range for Contact Type Sensors -35 to 1600 deg C and for Non-Contact Type Sensors 50 to 1700 deg C).
-
Product
Functional Test Service
-
Testing House provides all Software and Hardware needed to implement a complete Functional Test.
-
Product
Website, Mobile & Web App Load Testing
LoadComplete
-
LoadComplete helps you design and run performance, stress, and load tests for mobile, websites, and web apps. It's very easy to use. In fact, it is so easy, that you can create your first load test within a few seconds, even without any programming knowledge. LoadComplete allows you to generate load through virtual machines, on-premise computers, or even the cloud. It's compatible with leading continuous integration environments, which allows you to find root causes immediately.
-
Product
Calibration Services
-
SIMCO provides calibration services to over 3,000 organizations including the top 10 U.S. biomedical manufacturers and 9 of the top 10 U.S. aerospace and defense manufacturers. A calibration industry leader since 1962, SIMCO has received calibration leadership awards for 8 consecutive years from independent research firm Frost & Sullivan. SIMCO has earned these awards and developed a strong reputation for being “the standard for quality service” by providing customers with the advantages listed below.
-
Product
Service Virtualization Test Platform
Virtualize
-
Access a complete test environment—anytime, anywhere. Parasoft Virtualize, an open automated service virtualization solution, creates, deploys, and manages simulated dev/test environments. It simulates the behavior of dependent applications that are still-evolving, difficult to access, or difficult to configure for development or testing.
-
Product
Lifecycle Services for Humidity, Dewpoint, Trace Gas or Oxygen Measurement Products from PST
-
Whatever your industry, your location or your measurement product, our global network of service centres with over 50 skilled service engineers will help you locally. We are committed to support you with services that are based on our technical expertise to maintain the reliability, safety and performance of your process control and measurement equipment from one of our trusted brands.
-
Product
Telecomm Services
-
Advanced Technical Enterprises, Inc
The UNIVERGE SV8000 Series Communication Servers from NEC creates new ways of generating revenue and increasing customer responsiveness while simultaneously improving efficiency and reducing costs. This robust, feature-rich solution is completely scalable and can be expanded to meet your communications needs both now and in the future. Designed to be both versatile and scalable for your growing business needs, the SV8100 supports TDM, IP, video, wired or wireless.
-
Product
Infrared Simulation Services
-
INO offers a simulation service to assist with the hardware and software design of infrared and electro-optical devices. Precise performance predictions help integrators understand application requirements and bring application performance in line with client specificationsbefore the advance design and fabrication phases. For a minimal investment, infrared simulations help minimize risk in the early stages of development.
-
Product
ESD & Latch-Up Test Service
-
MASER Engineering has automatic test equipment for the most common ESD test pulse models. MIL - JEDEC - ESDA - IEC standards. IC level Human Body Model. IC level Machine Model. IC level Charged Device Model. System level IEC 61000 HBM. AEC-Q100 Field Induced Gate Leakage test. Static Latch-Up test. Dynamic Latch-Up test.
-
Product
Real-Time End-to-End Service and Application
NexusNETVIEW
-
the most scalable & reliable real-time end-to-end service and application monitoring, analytics, and automation platform for communication service providers
