Multifunction Analog I/O Card

LPCI-AIO16A - Acces I/O Products, Inc.

Model LPCI-AIO16A provides 500k samples/second, with 16-bit resolution, for the board’s 16 single-ended or 8 differential analog input channels. Also included are two 12-bit analog outputs, 16 digital I/O lines and an 8254 with three 16-bit counter/timers. The board meets the MD2 Low Profile PCI Bus Specification and can be installed in any 3.3V or 5V PCI or PCI-X slot.

Product Home Contact/Sales Distributors/Reps Manual Company Catalog Share Add To List

Topics

Family

Digital Input / Output Data Acquisition (DAQ) Products

Acces I/O Products, Inc.

In many cases, we only need to know a simple status about the device we are trying to collect data from, whether something is true or false, on or off, in one position or another. In these cases, we can determine what we need to know using a digital input, or control these things by a digital output. Digital I/O can fit into many applications.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
24 and 48 Digital Input/Output Cards

PCI-DIO Series - Acces I/O Products, Inc.

The PCI-DIO-48/48S, PCI-DIO-48JP/JPS, PCI-DIO-48JPL/JPLS, PCI-DIO-48H/HS and PCI-DIO-24S are 24- and 48-bit parallel digital input/output cards designed for use in PCI-Bus computers.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
32 Channel Optically Isolated Digital Card

104-IDIO-16 - Acces I/O Products, Inc.

The Model 104-IDIO-16 is a 32-channel PC/104 utility board featuring 16 optically isolated inputs and 16 optically isolated solid state outputs. The isolated, non polarized inputs may be driven by either DC sources of 3-31V (or higher by special order) or AC sources at frequencies of 40Hz to 10KHz

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
36-Channel PC/104 Isolated Input/Relay Module

104-II32-4RO - Acces I/O Products, Inc.

Model 104-II32-4RO is a 36-channel PC/104 utility board featuring 32 fully optically isolated digital inputs and four handy relay outputs. The inputs may be driven by either DC sources of 3-31V (or higher by special order) or AC sources at frequencies of 40Hz to 10KHz. Optically isolating the digital inputs from each other, and from the computer, assures smooth, error-free data transmission in noisy, real-world environments.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Digital I/O Board w/CoS IRQ

104-DIO-48S - Acces I/O Products, Inc.

*48 or 24 parallel lines of 82C55 digital I/O with tristate buffers prevent unintended control of external equipment*IRQ on input change of state (COS) eliminates the need for constant polling*High sink/source current 64mA/32mA*I/O pulled up to 5V for contact monitoring*Compatible with Opto-22 and other industry standard I/O racks

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Digital Input/Output Card

IOD-144 - Acces I/O Products, Inc.

This is a 144-bit full-size card. A Programmable Peripheral Interface chip, type 8255-5 provides three 8-bit ports (A, B, and C) for each 24-bit group. Each port can be independently programmed for either input or output. Port C can also be configured as two 4-bit ports. These cards fully implement Mode 0 of the 8255 PPI chip. (Consult the factory if you desire to operate in Mode 1.) Type LS245 bi-directional transceivers sink 24 mA (optionally 64 mA) and source 15 mA. These transceiver buffers provide hysteresis correction on inputs and added drive capability on outputs. The direction of the transceivers is set by software.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Isolated Digital Input and Relay Output Card

104-IIRO-8 - Acces I/O Products, Inc.

The 104-IIRO-8 is a low-cost card that provides isolated input and output for PC/104 Bus computer applications. The card has eight optically-isolated digital inputs for AC or DC control signals, eight TTL Inputs and eight electro-mechanical relay outputs. An Economy version can be ordered as Model 104-IIRO-8E which has no Change of State Detection or IRQs.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Isolated Relay I/O Board

104-IIRO-16 - Acces I/O Products, Inc.

The 104-IIRO-16 is a low-cost board that provides isolated input and output for PC/104 Bus computer applications. The board has sixteen optically-isolated digital inputs for AC or DC control signals and sixteen electro-mechanical relay outputs. The Change of State Detection capability of ACCES’ Model 104-IIRO-16 sets this board apart from the competition. An Economy version can be ordered as Model 104-IIRO-16E which has no Change of State Detection or IRQs. Also available is Model 104-RO-16 which has 16 relay outputs only.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Counter/Timer Board

USB-CTR-15 - Acces I/O Products, Inc.

The USB-CTR-15 is an ideal solution for adding portable, easy-to-install, counter/timer capabilities to any PC or embedded system with a USB port. This board is packaged in a small, rugged, industrial enclosure and features 15 independent 16-bit counter/timers. The unit is a true USB 2.0 device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The unit is plug-and-play allowing quick connect/disconnect whenever you need additional counter/timer devices on your USB port. The USB-CTR-15 can be used for a wide variety of measurement applications including event counting, frequency measurements, position measurement, pulse counting, pulse-width modulation and pulse generation. The OEM version provides just the board without the enclosure or external screw terminal board and is ideal for a variety of embedded OEM applications.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
USB Digital Input/Output Module

USB-DIO-32 - Acces I/O Products, Inc.

The USB-DIO-32 is an ideal solution for adding embedded, portable, easy-to-install digital I/O and counter capabilities to any computer with a USB port. The USB-DIO-32 is a USB 2.0 device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The board is plug-and-play allowing quick connect or disconnect whenever you need additional I/O on your USB port.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List