Power Supplies
Power Supplies by Aplab
Topics
-
Unlisted Product
Ultra Isolation Transformer – 400VA to 2000VA
Isoline
-
- Filters power line noise, spikes and transients.- Isolates sensitive equipments from noisy power lines.- Complete electrostatic shielding.- Minimizing common mode noise by over 130dB.- Minimizes transverse mode noise.- Line and load regulation better than ±3.5%.- Quality components, conservating ratings and ruggedised design for best long term value
-
Unlisted Product
Servo Controlled Line Voltage Stabilizer
Servoline Plus
-
- APLAB Quality prevails for over 4 decades setting standards for High Reliability & Long Life in Line Voltage Regulators.- The first company to design Stepper Motors in India that provides Digital Drive to variable transformers in LVRs.- We supplied India’s first Servo Line Voltage Regulator to Indian Army guaranteed to work from -40°C to +55°C.- APLAB AVR feed stable line supply to Innumerable Critical Loads in Indian Military, Telecom and Broadcast Services. Worldwide Reputation as the only “Install & Forget” class Line Voltage Regulators.
-
Product
Programmable AC Power Source
Model 8600 Series
-
- Compact size and light weight, standard 19″ rack construction- Step-less frequency setting from 45 to 450Hz- Very low distortion sine wave output- Output voltage range selectable 135 or 270V AC- Galvanically isolated input/output- Independent on/off switch for input and output- 16×2 vacuum florescent display for parameter display- Complete operation through push switches and a digital rotary encoder- Automatic protection against overload, short circuit and over temp.- Built in PFC to provide 0.99 input power factor and wide input range- Conforms to EN55022, class A, safety standard EN60950
-
Unlisted Product
Encased Preset 5 – 48V, 10W – 1KW DC Power Supplies
-
- Specially Designed for OEM Use Battery Eliminator/Float Charger- Output Voltage Adjustability ±10%- Quality Components and Conservative Ratings for High Reliability and Long Life- High Regulation, Low Ripple and Noise- Suitable for Bench/Rack Use
-
Unlisted Product
AC/DC 1-12V/6A Bench Power Supplies
Model PS126
-
Model PS126 is a simple to use source of power for students in their experiments in Electrical Labs. ThePower Supply delivers both AC and DC voltage upto 12 Volts in steps of 1Volt. The external load can draw upto 6 Amperes from either AC or DC terminal. The output is also protected against short circuit with a resettable overload Thermal Trip. PS126 is delivered in two styles. Model PS126S has a rotary switch for the voltage selection whereas PS126T has a facility to choose desired voltage with a plug-in arrangement for tap selection. PS126 is ideally suited for use in school and is designed to be safe and rugged to withstand handling by the students.
-
Unlisted Product
Digital Output AC/DC Power Supply, 0-25V/5A
Model Z2505D
-
- Fully Metallic Construction to Stop Radiated EMI- 0-25 @ 5AMP Variable- AC or DC Selection Switch- Separate Circuit Breakers for AC & DC- Output Voltage 3 Digit LED Display (Green)- Output Current 3 Digit LED Display (Green)- Power Switch ON/OFF Switch with LED Indicator- Separate Power Switch- Heavy Duty Transformer- Rugged Metal Case- 115V @ 60Hz or 230VAC, 50Hz,Single Phase
-
Unlisted Product
Switch Mode Rectifier & Chargers
SM Series
-
- Compact 19″ Rack construction- Wide Input Range- Abnormal condition Alarm- Float/Boost Mode- Optional feature include PFC- Designed to meet VDE0878/EN55022-B- Power Rating up to 6000W
-
Unlisted Product
Switch Mode Power Supply
EU Series
-
- Designed to meet DIN standards mechanically and VDE standards electrically European market.- Wide acceptance range of input 90-264V AC.- Wide choice of standard single and multi output models.- Hold up time 20mS guaranteed at lowest line input.- Line and load regulation better than ±2%.- Excellent step load transient response 100mV.- Fully protected against overload and short circuit.- Quality components, conservating ratings and ruggedised design for best long term value.
-
Unlisted Product
Switch Mode Power Supply
ES Series
-
- Designed to meet DIN standards mechanically and VDE standards electrically European market.- Wide acceptance range of input 184-276V AC.- Wide choice of standard single and multi output models.- Hold up time 20mS guaranteed at lowest line input.- Line and load regulation better than ±2%.- Excellent step load transient response 100mV.- Fully protected against overload and short circuit.- Quality components,conservating ratings and ruggedised design for best long term value.
-
Unlisted Product
Din Rail Power Supply – 35W / 60W / 120W / 240W
-
- Wide input range: 90-264VAC 47-63Hz 127-380VDC- Output power ready signal- High efficiency switch-mode power supply- Short circuit protection- Over voltage protection- Over load protection
-
Unlisted Product
High Power 1200W to 7200W DC/DC Converter System
-
Your product description goes here.
-
Product
High Voltage DC Lab Power Supplies 300V-5000V Output for Research Labs / Capacitor Testing – 300, 600, 1000, 3000, 5000V
-
- 19” Rack Adaptable- Laboratory Bench Unit- Digital Output Metering- Constant Voltage Current Limit Type Character- Micro Switch Provided for Protection against Shock- 3U High (133 mm)- Power Saving Thyristor Preregulator Technique
-
Unlisted Product
Triple Output Regulated DC Power Supply
TT3203D
-
- Fully Metallic Construction to stop radiated EMI.- Compact, Rugged and Thermally Protected Design.- DC Output ON/OFF on each main output.- Voltage & Current Output Preset Facility for safety.- Constant Voltage/ Constant Current Mode- 3-Digit DPM or Analog Metering of V and A- High Stability & Close Regulation ±0.01%.- Low Ripple & CM and TM Noise <1mV- Overload & Reverse Polarity Protection- Overheat Protection- Convection cooled –no fans- Meets International Safety Standards- Dual Line Input – 115V or 230V AC ±10%, Switch- Selected – 48-66Hz- Multi-Output PS Features:- Series, Parallel Tracking or Independent operation in T Suffix models- Third Output in TT series is 2.8V to 5.5V variable for 3/5V logic- Single, Dual, Triple or Quad Output customized option available
-
Product
DC Lab Power Supplies
TD3202M
-
- Fully Metallic Construction to Stop Radiated EMI- Compact & Rugged Design- DC Output ON/OFF on each Main Output- Voltage & Current Output Preset Facility for Safety- Constant Voltage / Constant Current Mode- 3 Digit DPM V and A- High Stability & Close Regulation ±0.01% +3mV- Low Ripple <1mV rms- Overload Protection- Convection Cooled – No Fans- Meets International Safety Standards
-
Unlisted Product
High Current DC Regulated Power Supplies
1790 Series
-
- Constant Voltage (CV) and Constant Current (CC) Operation- High Stability and Excellent Regulation- Separate Output ON / OFF Switch- Remote Sensing- External Analog- Programming Interface Standards
-
Product
High Power Digital Lab 500W – 1.2KW Output – Regulated DC Power Supply
LAB Series
-
- 19” Rack Adaptable- Constant Voltage / Constant Current Operation- Two Digital Meters – 3 Digit DPMs- Phase Controlled PreRegulation Plus Linear PostRegulation- Remote Sensing Facility- High Stability and Close Regulation ±0.01%OPTIONS AT EXTRA COSTa) Presetting Facilityb) Over Voltage Protectionc) 19” Rack Mountingd) Analog programming &monitoring for Voltage &Current.
-
Product
High Power Digital Lab Series Regulated DC Power Supply – 3000W
-
- 3000W different combination- High current density.- 19″ rack adaptable -5U high- Remote sensing.- Front panel potentiometer to set V&I- 3Digit seven segment display for V&I- High stability and close regulation- Phase controlled preregulation plus linear post regulation Optional, at extra cost- Over voltage protection- 19″ rack mounting
-
Product
High Power Digital Lab Series Regulated DC Power Supply – 2KW
-
- 2000W different combination- High current density.- 19″ rack adaptable -3U high- Front panel potentiometer to set V&I- Remote sensing- 3Digit seven segment display for V&I- High stability and close regulation- Phase controlled preregulation plus linear post regulation- Optional, at extra cost- Over voltage protection- 19″ rack mounting- Analogue programming and monitoring for V&I
-
Product
Dual Output Digital Lab Series Regulated DC Power Supply – Upto 1280W
-
- 300W to 1280W different combination- High current density.- 19″ rack adaptable -3U high- Remote sensing.- Front panel potentiometer to set V&I- 3Digit seven segment display for V&I- High stability and close regulation- Phase controlled preregulation plus linear post regulation- Optional, at extra cost- Over voltage protection- 19″ rack mounting- Analogue programming and monitoring for V&I
-
Product
Multi Output Regulated DC Power Supply
LQ6324T
-
- Low cost general purpose laboratory bench unit.- Fully protected against overload and short circuit.- Three independent outputs electrically isolated from each other.- 5V/5A with over voltage crowbar protection for digital ICs.- Electrically floating outputs up to 500V DC w.r.t. ground.- Compact modular construction.- Precise regulation, low ripple and noise for both constant voltage and constant current operation.- Quality components and conservating ratings for high reliability and long life.
-
Product
Programmable Multi Output DC Power Supply
LQ6324P
-
- Multi Output Linear DC Power Supply- Digitally Controlled Output Settings- Store / Load 10 Sets of Output Settings in Internal Memory- USB Interface Provided- Programmable Arbitrary Variable Output by Feeding Coefficient of the Curve- User Friendly Front End- Low Cost General Purpose Laboratory Bench Unit- Fully Protected against Overload and Short Circuit- 5V/5A with Over Voltage Crowbar Protection for Digital ICs- Three Independent Outputs Electrically isolated from Each Other- Electrically Floating Outputs up to 500V DC w.r.t. Ground- Precise Regulation, Low Ripple and Noise for Both Constant Voltage & Current Operation
-
Product
Digital Lab 30W – 300W Regulated DC Power Supplies
-
- 19” Rack Adaptable – 3U High Digital Output Metering 3 Digit DPM- Constant Voltage/Constant Current Operation- High Stability and Close Regulation ±0.01%- Proven Reliability and Endurance- 3U High- Remote Sensing Facility for 5A & Above Rating Models
-
Product
High Current Electronic Load (600W-1200W)
ELCH600 & ELCH1200
-
- Low lead resistance <5m Ohm for Fuel-cell- Battery Testing- VFD display- High resolution 0.1mA/1mV- Voltage range 0V to 500V- Working mode CV/CC/CW/CR- OV/OC/OP/OT protection- Communication: USB/RS232/GPIB
-
Product
DC Programmable Electronic Load
ELCH300
-
- VFD display- High resolution 0.1mA/1mV- Voltage range 0V to 500V- Working mode CV/CC/CW/CR/OV/OC/- OP/OT protection- Communication: USB/RS232/GPIB
-
Unlisted Product
High Power Programmable Power Supplies
VSP Series
-
- Zero voltage soft switching technique, low ripple and noise- Use of reliable digital encoder for voltage and current setting- Micro controller for digital programming- Constant voltage/constant current mode with auto mode crossover- LabView®and LabWindow® drivers- Active power factor correction at the input with wide input window- Three digit seven segment LED display for voltage and current read back- Standard 19″ rack mount suitable for ATE and OEM applications- Parallel operation with active current sharing- Wide choice of interface RS232, RS485, GPIB for external programming- Isolated analog programming and monitoring surface- Optional Ethernet interface card-kit
-
Product
Autocompute LCR-Q Meter Sorter
Model 4912 / 4912PR
-
- Microprocessor based Fully Automatic L, C, R, Q and D measurement- Autoranging with Direct Digital Readout- 4 Terminal Measurement Technique- No Tuning or Balancing- Series or Parallel Equivalent Measurement- Absolute Value and Nominal Value with Percentage Tolerance- Single / Multiple Parameters Check During Component Sorting- Feather Touch Keys with Audio Feedback- Thermal Shut Down for Overheat Protection- Special Mechanism for Fast and Easy Insertion and Removal of Test Component- Low Cost and Portable- Component Sorting on Absolute or Nominal Value Basis with a Percentage Tolerance- Aplab Model 4912PR is Remote Programmable Auto Compute LCR-Q Meter Sorter, Which can be Programmed through GPIB, RS232 or SPIB Interface
Filter Products:
-
Unlisted Product
Servo Controlled Line Voltage Stabilizer
Servoline Plus
-
- APLAB Quality prevails for over 4 decades setting standards for High Reliability & Long Life in Line Voltage Regulators.- The first company to design Stepper Motors in India that provides Digital Drive to variable transformers in LVRs.- We supplied India’s first Servo Line Voltage Regulator to Indian Army guaranteed to work from -40°C to +55°C.- APLAB AVR feed stable line supply to Innumerable Critical Loads in Indian Military, Telecom and Broadcast Services. Worldwide Reputation as the only “Install & Forget” class Line Voltage Regulators.
-
Unlisted Product
Ultra Isolation Transformer – 400VA to 2000VA
Isoline
-
- Filters power line noise, spikes and transients.- Isolates sensitive equipments from noisy power lines.- Complete electrostatic shielding.- Minimizing common mode noise by over 130dB.- Minimizes transverse mode noise.- Line and load regulation better than ±3.5%.- Quality components, conservating ratings and ruggedised design for best long term value
-
Product
Programmable AC Power Source
Model 8600 Series
-
- Compact size and light weight, standard 19″ rack construction- Step-less frequency setting from 45 to 450Hz- Very low distortion sine wave output- Output voltage range selectable 135 or 270V AC- Galvanically isolated input/output- Independent on/off switch for input and output- 16×2 vacuum florescent display for parameter display- Complete operation through push switches and a digital rotary encoder- Automatic protection against overload, short circuit and over temp.- Built in PFC to provide 0.99 input power factor and wide input range- Conforms to EN55022, class A, safety standard EN60950
-
Unlisted Product
Encased Preset 5 – 48V, 10W – 1KW DC Power Supplies
-
- Specially Designed for OEM Use Battery Eliminator/Float Charger- Output Voltage Adjustability ±10%- Quality Components and Conservative Ratings for High Reliability and Long Life- High Regulation, Low Ripple and Noise- Suitable for Bench/Rack Use
-
Unlisted Product
AC/DC 1-12V/6A Bench Power Supplies
Model PS126
-
Model PS126 is a simple to use source of power for students in their experiments in Electrical Labs. ThePower Supply delivers both AC and DC voltage upto 12 Volts in steps of 1Volt. The external load can draw upto 6 Amperes from either AC or DC terminal. The output is also protected against short circuit with a resettable overload Thermal Trip. PS126 is delivered in two styles. Model PS126S has a rotary switch for the voltage selection whereas PS126T has a facility to choose desired voltage with a plug-in arrangement for tap selection. PS126 is ideally suited for use in school and is designed to be safe and rugged to withstand handling by the students.
-
Unlisted Product
Digital Output AC/DC Power Supply, 0-25V/5A
Model Z2505D
-
- Fully Metallic Construction to Stop Radiated EMI- 0-25 @ 5AMP Variable- AC or DC Selection Switch- Separate Circuit Breakers for AC & DC- Output Voltage 3 Digit LED Display (Green)- Output Current 3 Digit LED Display (Green)- Power Switch ON/OFF Switch with LED Indicator- Separate Power Switch- Heavy Duty Transformer- Rugged Metal Case- 115V @ 60Hz or 230VAC, 50Hz,Single Phase
-
Unlisted Product
Switch Mode Rectifier & Chargers
SM Series
-
- Compact 19″ Rack construction- Wide Input Range- Abnormal condition Alarm- Float/Boost Mode- Optional feature include PFC- Designed to meet VDE0878/EN55022-B- Power Rating up to 6000W
-
Unlisted Product
Switch Mode Power Supply
EU Series
-
- Designed to meet DIN standards mechanically and VDE standards electrically European market.- Wide acceptance range of input 90-264V AC.- Wide choice of standard single and multi output models.- Hold up time 20mS guaranteed at lowest line input.- Line and load regulation better than ±2%.- Excellent step load transient response 100mV.- Fully protected against overload and short circuit.- Quality components, conservating ratings and ruggedised design for best long term value.
-
Unlisted Product
Switch Mode Power Supply
ES Series
-
- Designed to meet DIN standards mechanically and VDE standards electrically European market.- Wide acceptance range of input 184-276V AC.- Wide choice of standard single and multi output models.- Hold up time 20mS guaranteed at lowest line input.- Line and load regulation better than ±2%.- Excellent step load transient response 100mV.- Fully protected against overload and short circuit.- Quality components,conservating ratings and ruggedised design for best long term value.
-
Unlisted Product
Din Rail Power Supply – 35W / 60W / 120W / 240W
-
- Wide input range: 90-264VAC 47-63Hz 127-380VDC- Output power ready signal- High efficiency switch-mode power supply- Short circuit protection- Over voltage protection- Over load protection
-
Unlisted Product
High Power 1200W to 7200W DC/DC Converter System
-
Your product description goes here.
-
Product
High Voltage DC Lab Power Supplies 300V-5000V Output for Research Labs / Capacitor Testing – 300, 600, 1000, 3000, 5000V
-
- 19” Rack Adaptable- Laboratory Bench Unit- Digital Output Metering- Constant Voltage Current Limit Type Character- Micro Switch Provided for Protection against Shock- 3U High (133 mm)- Power Saving Thyristor Preregulator Technique
-
Unlisted Product
Triple Output Regulated DC Power Supply
TT3203D
-
- Fully Metallic Construction to stop radiated EMI.- Compact, Rugged and Thermally Protected Design.- DC Output ON/OFF on each main output.- Voltage & Current Output Preset Facility for safety.- Constant Voltage/ Constant Current Mode- 3-Digit DPM or Analog Metering of V and A- High Stability & Close Regulation ±0.01%.- Low Ripple & CM and TM Noise <1mV- Overload & Reverse Polarity Protection- Overheat Protection- Convection cooled –no fans- Meets International Safety Standards- Dual Line Input – 115V or 230V AC ±10%, Switch- Selected – 48-66Hz- Multi-Output PS Features:- Series, Parallel Tracking or Independent operation in T Suffix models- Third Output in TT series is 2.8V to 5.5V variable for 3/5V logic- Single, Dual, Triple or Quad Output customized option available
-
Product
DC Lab Power Supplies
TD3202M
-
- Fully Metallic Construction to Stop Radiated EMI- Compact & Rugged Design- DC Output ON/OFF on each Main Output- Voltage & Current Output Preset Facility for Safety- Constant Voltage / Constant Current Mode- 3 Digit DPM V and A- High Stability & Close Regulation ±0.01% +3mV- Low Ripple <1mV rms- Overload Protection- Convection Cooled – No Fans- Meets International Safety Standards
-
Unlisted Product
High Current DC Regulated Power Supplies
1790 Series
-
- Constant Voltage (CV) and Constant Current (CC) Operation- High Stability and Excellent Regulation- Separate Output ON / OFF Switch- Remote Sensing- External Analog- Programming Interface Standards
-
Product
High Power Digital Lab 500W – 1.2KW Output – Regulated DC Power Supply
LAB Series
-
- 19” Rack Adaptable- Constant Voltage / Constant Current Operation- Two Digital Meters – 3 Digit DPMs- Phase Controlled PreRegulation Plus Linear PostRegulation- Remote Sensing Facility- High Stability and Close Regulation ±0.01%OPTIONS AT EXTRA COSTa) Presetting Facilityb) Over Voltage Protectionc) 19” Rack Mountingd) Analog programming &monitoring for Voltage &Current.
-
Product
High Power Digital Lab Series Regulated DC Power Supply – 3000W
-
- 3000W different combination- High current density.- 19″ rack adaptable -5U high- Remote sensing.- Front panel potentiometer to set V&I- 3Digit seven segment display for V&I- High stability and close regulation- Phase controlled preregulation plus linear post regulation Optional, at extra cost- Over voltage protection- 19″ rack mounting
-
Product
High Power Digital Lab Series Regulated DC Power Supply – 2KW
-
- 2000W different combination- High current density.- 19″ rack adaptable -3U high- Front panel potentiometer to set V&I- Remote sensing- 3Digit seven segment display for V&I- High stability and close regulation- Phase controlled preregulation plus linear post regulation- Optional, at extra cost- Over voltage protection- 19″ rack mounting- Analogue programming and monitoring for V&I
-
Product
Dual Output Digital Lab Series Regulated DC Power Supply – Upto 1280W
-
- 300W to 1280W different combination- High current density.- 19″ rack adaptable -3U high- Remote sensing.- Front panel potentiometer to set V&I- 3Digit seven segment display for V&I- High stability and close regulation- Phase controlled preregulation plus linear post regulation- Optional, at extra cost- Over voltage protection- 19″ rack mounting- Analogue programming and monitoring for V&I
-
Product
Multi Output Regulated DC Power Supply
LQ6324T
-
- Low cost general purpose laboratory bench unit.- Fully protected against overload and short circuit.- Three independent outputs electrically isolated from each other.- 5V/5A with over voltage crowbar protection for digital ICs.- Electrically floating outputs up to 500V DC w.r.t. ground.- Compact modular construction.- Precise regulation, low ripple and noise for both constant voltage and constant current operation.- Quality components and conservating ratings for high reliability and long life.
-
Product
Programmable Multi Output DC Power Supply
LQ6324P
-
- Multi Output Linear DC Power Supply- Digitally Controlled Output Settings- Store / Load 10 Sets of Output Settings in Internal Memory- USB Interface Provided- Programmable Arbitrary Variable Output by Feeding Coefficient of the Curve- User Friendly Front End- Low Cost General Purpose Laboratory Bench Unit- Fully Protected against Overload and Short Circuit- 5V/5A with Over Voltage Crowbar Protection for Digital ICs- Three Independent Outputs Electrically isolated from Each Other- Electrically Floating Outputs up to 500V DC w.r.t. Ground- Precise Regulation, Low Ripple and Noise for Both Constant Voltage & Current Operation
-
Product
Digital Lab 30W – 300W Regulated DC Power Supplies
-
- 19” Rack Adaptable – 3U High Digital Output Metering 3 Digit DPM- Constant Voltage/Constant Current Operation- High Stability and Close Regulation ±0.01%- Proven Reliability and Endurance- 3U High- Remote Sensing Facility for 5A & Above Rating Models
-
Product
High Current Electronic Load (600W-1200W)
ELCH600 & ELCH1200
-
- Low lead resistance <5m Ohm for Fuel-cell- Battery Testing- VFD display- High resolution 0.1mA/1mV- Voltage range 0V to 500V- Working mode CV/CC/CW/CR- OV/OC/OP/OT protection- Communication: USB/RS232/GPIB
-
Product
DC Programmable Electronic Load
ELCH300
-
- VFD display- High resolution 0.1mA/1mV- Voltage range 0V to 500V- Working mode CV/CC/CW/CR/OV/OC/- OP/OT protection- Communication: USB/RS232/GPIB
-
Unlisted Product
High Power Programmable Power Supplies
VSP Series
-
- Zero voltage soft switching technique, low ripple and noise- Use of reliable digital encoder for voltage and current setting- Micro controller for digital programming- Constant voltage/constant current mode with auto mode crossover- LabView®and LabWindow® drivers- Active power factor correction at the input with wide input window- Three digit seven segment LED display for voltage and current read back- Standard 19″ rack mount suitable for ATE and OEM applications- Parallel operation with active current sharing- Wide choice of interface RS232, RS485, GPIB for external programming- Isolated analog programming and monitoring surface- Optional Ethernet interface card-kit
