Nordson Corporation
Nordson strives to be a vital, self-renewing global organization that produces and grows wealth for our employees, customers, shareholders and communities within the framework of ethical behavior and enlightened citizenship. Our employees are the engine that drives our progress in this pursuit.
- +1 440.892.1580
- 28601 Clemens Road
Westlake, Ohio 44145-4551
United States of America
Categories
-
product
In-line Plastic Mixers
Ideal for one-use fluid dispensing, Nordson EFD’s disposable static mixers eliminate the need to worry about premature curing of materials.
-
product
Acoustic Microscope
AMI D9650Z
The D9650Z incorporates the latest C-SAM technology with enhanced features to accommodate the testing of Power Modules as well as performing standard C-SAM operations. This new system configuration is optimized for inspection of heatsink bond integrity, thickness of bond layer and wire bond welds. Powered by our Sonolytics software platform with PolyGate technology, the D9650Z is ideal for failure analysis, process development and QC screening in low-volume production environments.
-
product
Universal Offline AXI Systems
AXI XT-6 Series
The XT-series provides the advanced inspection capability of Nordson TEST & INSPECTION's inline system in a smaller footprint manual load/island of automation system. The platforms are designed for flexibility and ease of use for a wide variety of products requiring 2D and 2.5D automated X-ray inspection. The XT-6/XT-6A platform is a highly flexible automated X-ray inspection system with minimum footprint and a parallel-kinematic Hexaglide manipulation unit for extreme-angle off-axis image acquisition with high resolution. It is suitable for high-quality X-ray analysis of electronic assemblies and material analysis of parts that require flexible part manipulation with multiple inspection angles. For batch modes and volume inspection the XT-6 can be equipped with a single-sided conveyor setup and magazine load/unload station (XT-6A).
-
product
Stellar 4000 Bondtester
STELLAR 4000 is the platform of choice for all manually operated pull and shear production bond testing. Configure as a simple bond wire pull tester, or upgrade for ball shear, die shear, bump pull, and tweezer pull testing.
-
product
2K Pistons
Pistons are inserted after the cartridge has been filled with two-component adhesives. Each design has its own unique way of removing the air between the piston and the adhesive, which is critical to dispense accuracy.
-
product
Nonwovens Solutions
OptiBond™
The capability to monitor and / or control dispensing in real-time helps improve production efficiency and reduce waste. Available as standalone systems or melter-integrated capability, flow monitoring and closed-loop flow control help produce disposable hygiene products faster, more efficiently and at lower costs. Nordson offers a broad range of products to help you improve product quality, reduce material waste, and increase production efficiency. These include: TruFlow meters, dividers / splitters, and applicators. GP 200 remote metering stations, Harmony applicators; Concert flow controllers and VersaBlue Plus or AltaBlue Plus melters.
-
product
Remote Metering Station
GP200
GP200 remote metering stations expand production capabilities by increasing delivery points of existing melters with metered add-on precision. They provide an economical alternative to purchasing an additional melter, converting from non-metered delivery, or adding application points.
-
product
High Flexible Inline AXI Platform
AXI X# Series
The X#-platform series is an inline automated X-ray system which covers a wide range of AXI applications. It is a flexible platform with very versatile fields of use depending on the application requirements. The inspectable applications range from component level inspection for wire bonds, large SMT boards, high-power electronic modules up to fully assembled modules.
-
product
Ultimus I-II Dispensers
High-precision benchtop fluid dispensing control for advanced applications of glues, oils, greases, epoxy, silicones, sealants, cyanoacrylates, solder pastes, and other assembly fluids dispensed with syringe barrels.
-
product
XRT Source Brighthawk
The BRIGHTHAWK NT100 is a performance-leading microfocus X-ray tube comprising proprietary technology to achieve a high brightness output. The tube consists of a LaB6 crystal source for generation of the electron beam, a magnetic beam steering system, and a tungsten target for X-ray photon emission. The components are mounted in a precision-engineering housing and held at ultra-low vacuum levels for long-life performance. Following on from the successful 3rd generation tube, this 4th generation of tube across a wide energy range from 30 kV to 160 kV is highly configurable through a software interface to the internal control board, which is connected via an optical interface (through an Ethernet converter).
-
product
PICO Pµlse Contact Dispense Valves
This contact dispense valve provides many of the same benefits of the PICO Pµlse jet valve, including high-speed dispensing at up to 1000Hz continuous*. It also delivers more accurate contact dispensing with less turbulence for greater fluid deposit consistency, placement, and process control.
-
product
Modular Gun Control System
Encore®
The new Encore gun control system is an all digital, easy to operate, energy efficient and modular automatic gun control system that provides precision pneumatic and electrostatic operating parameters for repeatable and reliable performance of automatic powder coating operations. The modular cabinet style design accommodates up to eight automatic gun controllers for easy operation of both reciprocators and in/out positioners.
-
-
product
X-Ray Detector
XRT Detector Onyx
ONYX 1412-X is a performance-leading X-ray detector comprising a proprietary 2768 × 2376 active pixel sensor array of 50 × 50 µm pixels. This detector consists of a high-speed, low-noise, radiation-tolerant, 14 × 12 cm, 6.6M pixel CMOS image sensor, with a directly deposited high-resolution CsI scintillator on Fibre Optic Plate. The highly configurable sensor is accessed through a software interface, connected via a 10 GbE SFP+ hardware interface.
-
product
Making Invisible Visible
Quadra 3
Quadra™ 3 is your partner for high quality X-ray inspection for production line quality control. Detect a wide range of manufacturing defects including BGA, QFN and IGBT attachment, PTH filling, interfacial voiding, component cracking and counterfeit device screening. High quality, high magnification inspection for product applications.
Parent
-
Nordson Corp.
Dispensing Equipment & Industrial Coating EquipmentCompany description.
Siblings
-
Nordson Adhesive Systems
We engineer, manufacture and market differentiated products used for dispensing adhesives, coatings, sealants, biomaterials and other materials; for fluid management; for test and inspection; and for UV curing and plasma surface treatment.
Siblings
-
YesTech, Inc.
YESTech, Inc., a division of Nordson Corporation, joining Nordson’s Advanced Technology Systems segment as a leading global provider of automated optical inspection and high-resolution x-ray inspection systems. The full line of inspection systems offers cost-effective, integrated yield enhancement solutions for the printed circuit board assembly, advanced semiconductor-packaging and hybrid assembly to EMS providers and electronics OEM's worldwide.
Siblings
-
Nordson Dage (Obsolete)
Control of the patented core technology of X-ray tube manufacture ensures that the high-resolution X-ray will detect, identify and measure even the smallest of features. DPI's high precision, state-of-the-art inspection equipment when joined with their sophisticated software offerings, ensure that the equipment is simple to use.
Siblings
-
Matrix Technologies GmbH (Obsolete)
Matrix Technologies GmbH is a global supplier of high-speed Automated Inline X-ray Inspection systems (AXI) and semi-automated X-ray Inspection systems to ensure the quality of critical electronic devices/components and electronic printed circuit boards manufactured by its customers.
Siblings
-
Matrix Technologies GmbH
Matrix Technologies GmbH, founded in 2004 and headquartered in Munich/Feldkirchen (Germany), is a market leading provider of Automated Inline X-ray Inspection systems (AXI & MXI for Electronics) that are used to control the manufacturing process and to ensure the quality of critical electronic devices, electronic printed circuit boards or fully assembled devices manufactured by its customers using surface mount technology (SMT). In addition, Matrix supplies automated and manual inspection solutions for Non-Destructive Testing (AXI for NDT) of other non-electronic materials such as casting or medical parts by using X-ray or Computed Tomography (“CT”) technology.
Siblings
-
Nordson Measurement & Control Solutions
We’re doing great things to transform manufacturing businesses around the world. Since our inception, we’ve always placed our focus on the customer and helping to drive outcomes that matter most. At Nordson Measurement & Control Solutions (formerly NDC Technologies) we’ve been delivering solutions for over 50 years, and our capabilities, depth of innovation experience and global reach have been growing ever since. We’ve played a dominant role in the food, bulk and tobacco; film extrusion and converting; cable and tubing; and metals industries. We know how to solve the toughest measurement and control challenges.
Siblings
-
CyberOptics Corporation
CyberOptics is a fully owned subsidiary of Nordson Corporation. The CyberOptics portfolio of high-precision sensors and systems for inspection and metrology, is part of the Nordson’s TEST & INSPECTION product line. CyberOptics solutions are used in SMT and semiconductor applications to improve customers’ yields, processes and productivity.
