Pickering Interfaces Inc.

product

PXI 8-Slot BRIC Matrix, 132x8 1-Pole (6 sub-cards)

40-562B-121-132X8

Pickering Interfaces Inc.

40-562B-121-132X8 - Pickering Interfaces Inc.

The 40-562B-121-132X8 is a high density BRIC8 matrix module with a size of 132x8 with 1-pole switching. It is part of a range of BRIC matrices available in 2, 4, 8 or 12-slot formats to suit high performance PXI matrix requirements and is constructed using instrumentation quality reed relays.

product

PXI Programmable Resistor Card 2-Channel 2.5 Ohm to 8.19k Ohm - SPST

40-294-124

Pickering Interfaces Inc.

40-294-124 - Pickering Interfaces Inc.

These PXI Programmable Resistor modules are available with either two channels of 16-bit, two channels of 12-bit or four channels of 8-bit resistor chains in a single 3U PXI module. The module is ideal for simulating sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications.

product

Cable 96-Pin Female To 100-Pin Male Micro-D, 2m

40-973C-096-2M-FM

Pickering Interfaces Inc.

40-973C-096-2M-FM - Pickering Interfaces Inc.

The 96-Pin to 100-Pin SCSI Style Micro-D Adaptor Lead is constructed from 7/36 (28AWG) Tinned Copper twisted pair wiringwith Polyolefin insulation to minimise crosstalk. Metal Spring Latches are provided on the 96-Pin connector and 4-40 UNC screwlocks on the 100-Pin connector.

product

PXI Dual 4 to 1 RF Multiplexer 3GHz 50 Ohm MCX

40-872-102

Pickering Interfaces Inc.

40-872-102 - Pickering Interfaces Inc.

The 40-872-102 is a 50 Ohm 4 to 1 RF MUX with 2 banks in a single PXI slot. It exhibits low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The injection of noise and unwanted signals into the signal paths of the 40-872 has been minimized by careful attention to the mechanical and electrical design.

product

PXI 2A Multiplexer, 1-Bank, 64-Channel, 2-Pole

40-614C-016

Pickering Interfaces Inc.

40-614C-016 - Pickering Interfaces Inc.

This 1-bank, 64-channel, 2 pole version is part of the 40-614C High Density 2A multiplexer module range that is available in 20 configurations (see Also in this Range link above). All configurations use high quality electro-mechanical signal relays allowing each channel to switch current up to 2A and voltage up to 300VDC/250VAC.

product

Cable Assembly, 200-Pin LFH, Male (Male Screwlocks) to Female (Male Screwlocks), 1m

Pickering Interfaces Inc.

Pickering Interfaces Inc.

This male to female 1m cable assembly is suited for direct connection to all Pickering Interfaces products using the 200-Pin connector and is constructed from 4 bundles of 50-wire round/flat ribbon cable. The connector assembly can be secured to the product by male screwlocks.

product

PXIe Very High Density Versatile 2 A Multiplexer

42-612B-002

Pickering Interfaces Inc.

42-612B-002 - Pickering Interfaces Inc.

The 40-612B (PXI) and 42-612B (PXIe) Very High Density Versatile Multiplexer module features a wide range of software selectable switching configurations. It is especially useful where a number of high density multiplexers are required with the option of easily altering the channel count as a test system evolves.

product

25-Pin D-Type Male Connector Block

40-965-025-M

Pickering Interfaces Inc.

40-965-025-M - Pickering Interfaces Inc.

This connector block provides a simple method of connecting to 25-Pin D-Type connectors. The screw terminals use a rising cage clamp mechanism to minimize risk of copper strand breakage. PTFE cables are recommended for use with this connector block to maximise copper cross-sectional area and insulation properties. Connector blocks have higher losses than a cable connection and the breakdown voltage is controlled by clearances to the metal shell. The metal shell includes an internal insulation barrier under the carrier board.

product

PXI 8 Slot BRIC 230x8 1-Pole Dual Analog Bus (5 sub-cards)

40-560A-121-230X8-M

Pickering Interfaces Inc.

40-560A-121-230X8-M - Pickering Interfaces Inc.

This version of our BRIC is part of a range of high-density PXI matrix modules. These modules are available in 2, 4 or 8 slot PXI sizes to suit all high-performance matrix requirements and are constructed using instrumentation quality reed relays. With this high level of switching density, these PXI matrix modules allow a complete Functional ATE system to be housed in a single 3U PXI chassis. These BRIC matrix modules allow the use of lower cost 8 or 14-slot PXI chassis.

product

PXI 5A MUX, 1-Bank, 48-Chan, Ind. Isolation

40-651-101

Pickering Interfaces Inc.

40-651-101 - Pickering Interfaces Inc.

This range of high density power multiplexer modules is suitable for switching inductive/capacitive loads up to 5A at 250VAC. It is available in the following 1-pole multiplexer formats: 1-bank 48-channel. 2-bank 24-channel. 4-bank 11-channel. 8-bank 5-channel. Connections are made via a front panel 50-way male D-type connector. Power multiplexer modules are intended for switching heavy AC or DC loads or for slaving up to large external relays, contactors and solenoids.

product

PXI High Density Multiplexer, 8-Bank, 8-Channel, 1-Pole

40-610A-009

Pickering Interfaces Inc.

40-610A-009 - Pickering Interfaces Inc.

The 40-610A-009 is a 8-bank, 8-channel, 1-pole MUX and is part of our range of PXI high density reed-relay based multiplexer modules. The range includes a wide choice of switching configurations which are especially useful where a large number of small multiplexers are required. Typical applications include signal routing in ATE and data acquisition systems.

product

LXI Low Thermal EMF Matrix 1-pole 42x33

60-510-002

Pickering Interfaces Inc.

60-510-002 - Pickering Interfaces Inc.

The 60-510 is a high density 1-pole matrix module controlled via LXI. It has excellent thermal stability and substantially reduced thermal EMF figures when compared to a conventional switching matrix. Typical applications include signal routing in ATE, selecting thermocouple inputs, switching amplifier gain circuits and high accuracy DC micro-volt measurements. Ruthenium reed switches are used because of their good low level switching capability. They also have a very long life with excellent contact resistance stability, minimal wetting current and low thermal offset.

product

PXI 12-Slot BRIC Matrix, 160x16 1-Pole (5 sub-cards)

40-558-121-160X16

Pickering Interfaces Inc.

40-558-121-160X16 - Pickering Interfaces Inc.

The 40-558-121-160x16 matrix is part of a range of BRIC ultra-high-density large PXI matrices are available in 2, 4, 8 or 12-slot PXI sizes to suit all high-performance matrix requirements and are constructed using Pickering Electronics' 4mm x 4mm instrumentation quality reed relays.

product

PXI/PXIe RF Matrix, 16x2, 300 MHz, 50 Ω SMB With Loop-thru

40-728A-001-L

Pickering Interfaces Inc.

40-728A-001-L - Pickering Interfaces Inc.

The 40-728A-001-L (PXI) and 42-728A-001-L (PXIe) are 16x2 50 Ω RF matrices with SMB connectors and Y-axis loop-thru. The 4x-727A/728A/729A range are high density RF matrix modules suitable for switching up to 300 MHz in 50 Ω or 100 MHz in 75 Ω. They are available in 50 Ω or 75 Ω versions with SMB connectors or in 50 Ω versions with a multiway connector.

product

PCI Strain Gauge Simulator Card, 4-Channel, 1k

50-265-204

Pickering Interfaces Inc.

50-265-204 - Pickering Interfaces Inc.

These cards simulates the operation of a range of strain gauges making them ideal for testing strain gauge meters and a wide variety of industrial control systems. They provide a simple way of replacing in house developed sensors with a low cost simulator having excellent performance that is easy to calibrate and use.