Pickering Interfaces Inc.

product

PXI 2 Slot BRIC 46x16 1-Pole (2 sub-cards)

40-560A-221-46X16

Pickering Interfaces Inc.

40-560A-221-46X16 - Pickering Interfaces Inc.

This version of our BRIC is part of a range of high-density PXI matrix modules. These modules are available in 2, 4 or 8 slot PXI sizes to suit all high-performance matrix requirements and are constructed using instrumentation quality reed relays.As listed in the manual, page 33, using Slots 1 and 2. Slot 3 can be used only if it is programmed to be used.

product

PXI 5A Mux 8-Bank 5-Ch Isolated COM

40-651-014

Pickering Interfaces Inc.

40-651-014 - Pickering Interfaces Inc.

This range of high density power multiplexer modules is suitable for switching inductive/capacitive loads up to 5A at 250VAC. It is available in the following 1-pole multiplexer formats: 1-bank 48-channel. 2-bank 24-channel. 4-bank 11-channel. 8-bank 5-channel.Connections are made via a front panel 50-way male D-type connector. Power multiplexer modules are intended for switching heavy AC or DC loads or for slaving up to large external relays, contactors and solenoids.

product

200-Pin LFH Connector, PCB Mount, Right Angle Female

40-963-200-RF

Pickering Interfaces Inc.

40-963-200-RF - Pickering Interfaces Inc.

Accessory allows a user to create their own PCB based termination solution mounted directly on the front of the product or on the end of a cable. It is suitable for use with a variety of products. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.

product

Cable Assembly, 25-Pin D-Type, Female to Unterminated With Ferrules, 2m

40-972-025-2m-FU

Pickering Interfaces Inc.

40-972-025-2m-FU - Pickering Interfaces Inc.

The 25-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 19/0.18 (21AWG) Tinned Copper wire. The connector can be secured to the product by screwlocks. The unterminated connections are coded to match the connector pin designation and include crimped on ferrules to ensure the wire strands cannot break when they are terminated. Please ensure appropriate electrical safety precautions are observed when using this product.

product

8 Pin Power D-Type Female Connector, 40A, PCB Mount

40-963-008-RF

Pickering Interfaces Inc.

40-963-008-RF - Pickering Interfaces Inc.

This connector is suitable for Pickering Interface's modules that use the 8-Pin Power D-Type connector. It is designed to allow users to make a termination via a PCB.

product

PXI 48 x SPDT Electromechanical Relays

40-148-101

Pickering Interfaces Inc.

40-148-101 - Pickering Interfaces Inc.

The 40-145/46/48 range of high density switching modules are available in Normally Open (SPST & DPST) and changeover (SPDT) configurations. Connections are made via a front panel 200 pin female connector. General purpose relays are suitable for the construction of small switching networks, I/O port switching, for slave switching larger relays or for operating external devices (e.g. lamps, solenoids etc.).

product

PXI/PXIe Power Relay Module, 24xSPDT, 5 Amp, 50-Pin SGMC Connectors, With Interlock

42-158-002-HI

Pickering Interfaces Inc.

42-158-002-HI - Pickering Interfaces Inc.

The 40/42-158-002-HI is a PXI/PXIe high density power relay module with 24xSPDT switches rated at 5A and includes the hardware interlock option. User connection is via 2x50-pin SGMC male connectors, hardware interlock is via a 4-pin 00 series socket (mating plug is supplied).

product

PXI 8-Slot BRIC Matrix, 121x16 2-Pole (11 sub-cards)

40-562B-122-121X16

Pickering Interfaces Inc.

40-562B-122-121X16 - Pickering Interfaces Inc.

The 40-562B-122-121X16 is a high density BRIC8 matrix module with a size of 121x16 with 2-pole switching. It is part of a range of BRIC matrices available in 2, 4, 8 or 12-slot formats to suit high performance PXI matrix requirements and is constructed using instrumentation quality reed relays.

product

PXI 12-Slot BRIC Matrix, 264x4 2-Pole (6 sub-cards)

40-562B-322-264X4

Pickering Interfaces Inc.

40-562B-322-264X4 - Pickering Interfaces Inc.

The 40-562B-322-264X4 is a high density BRIC12 matrix module with a size of 264x4 with 2-pole switching. It is part of a range of BRIC matrices available in 2, 4, 8 or 12-slot formats to suit high performance PXI matrix requirements and is constructed using instrumentation quality reed relays.

product

PXI 2A Multiplexer, 16-Bank, 4-Channel 2-Pole

40-614-002

Pickering Interfaces Inc.

40-614-002 - Pickering Interfaces Inc.

The 40-614 High Density 2 Amp multiplexer module is available in 20 configurations. All configurations use high quality electro-mechanical signal relays allowing each channel to switch current up to 2A and voltage up to 200VDC/140VACThe module is suitable for signal routing in ATE and data acquisition systems. User connections are made via a front panel 160-pin DIN 41612 connector which is fully supported by our range of cabling and connector solutions.

product

PXI 4-Slot BRIC Matrix, 44x8 2-Pole (2 Sub-cards)

40-562B-022-44X8

Pickering Interfaces Inc.

40-562B-022-44X8 - Pickering Interfaces Inc.

The 40-562B-022-44X8 is a high density BRIC4 matrix module with a size of 44x8 with 2-pole switching. It is part of a range of BRIC matrices available in 2, 4, 8 or 12-slot formats to suit high performance PXI matrix requirements and is constructed using instrumentation quality reed relays.

product

LXI High-Density Matrix

Pickering Interfaces Inc.

Pickering Interfaces Inc.

Our LXI High-Density Modules are single and double pole matrices available in a wide range of configurations including versions with the added flexibility of dual analog bus. These high-density matrices are ideal for signal routing in large automatic test equipment (ATE) systems and are suitable for applications where a simple start-up process is required and for applications requiring control over large distances.

product

100-Pin Micro-D Connector, Right Angle PCB Mount, Female, 2-56 UNC Screwlocks

C100SFX-1PR-5A

Pickering Interfaces Inc.

C100SFX-1PR-5A - Pickering Interfaces Inc.

Female right angle PCB mount 100-pin Micro-D connector allows a user to create their own PCB based termination solution. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.

product

Cable Assembly, 200-Pin LFH, Female (Female Screwlocks) to 4x50-Pin IDC, Female, 2m

40-971B-200-2m-FF

Pickering Interfaces Inc.

40-971B-200-2m-FF - Pickering Interfaces Inc.

This female rear exit to female ribbon 2m long cable assembly does not connect directly to Pickering Interfaces products that use the 200-Pin LFH connector, but customers may find it useful in the development of their own connection solutions. It is constructed from 4 bundles of 50-wire round/flat ribbon cables, terminated with 50-pin female 2.54mm pitch IDC connectors. The 200-pin connector can be secured to its mating connector by female screwlocks

product

Cable 100-Pin Micro-D Male To Unterminated, With Ferrules, 2m 2-56 UNC Screwlocks, Metal Shell

A100SMR-F-9B200

Pickering Interfaces Inc.

A100SMR-F-9B200 - Pickering Interfaces Inc.

100-Pin Micro-D Male to Unterminated Cable Assembly With Ferrules, 2m Long With 2-56 UNC Screwlocks and Metal Backshell. Suitable for use with Pickering BRIC Modules.