Pickering Interfaces Inc.

product

PXI 3x3 20GHz Matrix with Termination

40-787-528-3X3-T

Pickering Interfaces Inc.

40-787-528-3X3-T - Pickering Interfaces Inc.

The 40-787 Microwave BRIC platform is designed to provide a solution for complex RF matrix applications. Using a common mechanical platform the module can be constructed to provide scalable non-blocking or blocking microwave matrix for frequencies to at least 20GHz. The standard configurations provide up to a 4x4 matrix. More complex matrix can be constructed by adding further switching functions and other devices inside the module.

product

Cable, 25 Pin 1.27mm Pitch Micro-D, Female to Female, 0.5m

A025CFR-025CFR-5A050

Pickering Interfaces Inc.

A025CFR-025CFR-5A050 - Pickering Interfaces Inc.

This 0.5m long female to female 25-Pin Micro-D Cable Assembly is constructed from 18/0.1 (26 AWG) copper wiring with PVC insulation and screening to minimise crosstalk. Screwlocks are provided to secure the connectors to their associated products. This cable assembly is suitable for high density applications including connection to Pickering's LXI DIO/Trigger port.

product

PXI Very High Density Multiplexer, 49-Channel, 4-pole

40-670C-022-49/4

Pickering Interfaces Inc.

40-670C-022-49/4 - Pickering Interfaces Inc.

The 40-670C-022-49/4 is a 49-channel, 4-pole MUX and is part of a series of very high density multiplexer modules featuring a wide range of switching configurations. Typical applications include signal routing in ATE and data acquisition systems. The 40-670 multiplexer may be operated as a conventional multiplexer with break-before-make action when a new channel is selected. In addition multiple channels may be simultaneously selected (not available in 1 pole mode).

product

PXI 10W Programmable Resistor Module, 1-Channel, 1Ω to 470Ω

40-253-114

Pickering Interfaces Inc.

40-253-114 - Pickering Interfaces Inc.

The 40-253-114 is a programmable resistor module with 1 channel which can be set between 1Ω and 470Ω with 2Ω resolution The 40-253 range provides a simple solution for applications requiring up to 10W of power handling per channel. The 40-253 is available in a variety of resistance ranges and resolution capabilities that meet the needs of most functional test systems.

product

PXI/PXIe Microwave Multiplexer, Single SP4T, 67GHz, 50Ω, SMA-1.85, Remote Mount

40-785C-471-E

Pickering Interfaces Inc.

40-785C-471-E - Pickering Interfaces Inc.

The 40-785C-471-E (PXI) and 42-785C-471-E (PXIe) are single SP4T 67GHz unterminated microwave multiplexers with remotely mounted relays. The 40/42-785C range of multiplexers are available as single or dual, SP6T or SP4T panel mounted multiplexers with relays mounted on the front panel. The single slot version can support up to three supplied remotely mounted multiplexers.

product

PXI High Density MUX BRIC, 8-Chan, 40-Pole

40-570-212

Pickering Interfaces Inc.

40-570-212 - Pickering Interfaces Inc.

product

PXI/PXIe Microwave Multiplexer, Single SP6T, 18 GHz, 50 Ω, SMA, Terminated, Failsafe

42-785C-521-T

Pickering Interfaces Inc.

42-785C-521-T - Pickering Interfaces Inc.

The 40-785C-521-T (PXI) and 42-785C-521-T (PXIe) are single failsafe SP6T 18 GHz microwave multiplexers with automatic termination of unused signals. The 40/42-785C range of multiplexers are available in single or dual, SP6T or SP4T configurations with relays mounted on the front panel. Remote versions are also available which can support up to three multiplexers in a single slot.

product

PXI/PXIe Very High Density Multiplexer, 24-Channel, 8-Pole

40-675B-002-24/8

Pickering Interfaces Inc.

40-675B-002-24/8 - Pickering Interfaces Inc.

The 40-675B-002-24/8 (PXI) and the 42-675B-002-24/8 (PXIe) are 24-channel, 8-pole multiplexers and are part of our range of very high density low cost multiplexer modules. These modules are suitable for signal routing in high channel count ATE and data acquisition systems. They use high quality electromechanical signal relays allowing each channel to switch current up to 1 A at 150 VDC/100 VAC. Connections are made via a front panel 200-pin connector.

product

PXI Dual 4 to 1 RF Multiplexer 3GHz 50 Ohm SMB Terminated

40-876-002

Pickering Interfaces Inc.

40-876-002 - Pickering Interfaces Inc.

The 40-876-002 is a 50 Ohm 4 to 1 RF multiplexer with 2 banks in a single PXI slot. Additionally, extra switching allows the common connection to be terminated into 50 Ohm, maintaining signal integrity. The module has low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The injection of noise and unwanted signals into the signal paths of the 40-876 has been minimized by careful attention to the mechanical and electrical design.

product

PXI Programmable Resistor Card 2-Channel 2.5 Ohm to 2.04k Ohm - SPST

40-294-122

Pickering Interfaces Inc.

40-294-122 - Pickering Interfaces Inc.

These PXI Programmable Resistor modules are available with either two channels of 16-bit, two channels of 12-bit or four channels of 8-bit resistor chains in a single 3U PXI module. The module is ideal for simulating sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications.

product

Modular Breakout System 37-Pin Plugin Module

95-294-001

Pickering Interfaces Inc.

95-294-001 - Pickering Interfaces Inc.

The 95-294-001 Plugin Breakout Module is designed to be fitted to a PXI 40-294 Programmable Resistor Module as part of the Pickering MBoS. The Modular Breakout System is designed to Simplify HILS (Hardware In the Loop Simulation) Applications.

product

Cable Assembly, 200-Pin LFH, Female (Female Screwlocks) to 4x50-Pin IDC, Female, 0.5m

40-971B-200-0.5m-FF

Pickering Interfaces Inc.

40-971B-200-0.5m-FF - Pickering Interfaces Inc.

This female rear exit to female ribbon 0.5m long cable assembly does not connect directly to Pickering Interfaces products that use the 200-Pin LFH connector, but customers may find it useful in the development of their own connection solutions. It is constructed from 4 bundles of 50-wire round/flat ribbon cables, terminated with 50-pin female 2.54mm pitch IDC connectors. The 200-pin connector can be secured to its mating connector by female screwlocks.

product

14 Slot, 3U, 350W, PXI Chassis

40-914-001

Pickering Interfaces Inc.

40-914-001 - Pickering Interfaces Inc.

This PXI chassis includes all the features and performance required by the PXI standard and supports a control interface or embedded controller and up to 13 more 3U peripheral modules.

product

PXI Power & Sense Multiplexer, 2-Pole, 18-Channel

40-658A-002

Pickering Interfaces Inc.

40-658A-002 - Pickering Interfaces Inc.

The 40-658-002 is a PXI multiplexer combining a 2-pole 18-way power distribution MUX with a second lower power 2-pole 18-way MUX in a convenient single slot PXI module. It is ideal for power distribution where power and sense signals are required to be connected to an array of devices under test.

product

LXI Reed Relay Matrix - Single 32x32 Plugin, No Direct Y Access, 1 Analog Bus

65-227-101

Pickering Interfaces Inc.

65-227-101 - Pickering Interfaces Inc.

The range includes four plug-in models covering matrices of up to 1,536x4 in increments of 128 (model 65-221), 768x8 in increments of 64 (model 65-223), 384x16 in increments of 32 (model 65-225), and 192x32 in increments of 32 (model 65-227). Users can specify as many or as few plug-in modules (up to six) required and can field upgrade the chassis to extend the matrix when necessary. Another important feature is that over 1,500 relays can be closed simultaneously for specific conditions for parametric testing.