Pickering Interfaces Inc.

product

50 Ohm BNC to SMA Adaptor Assembly

40-978-511-0.25m

Pickering Interfaces Inc.

40-978-511-0.25m - Pickering Interfaces Inc.

Pickering Interfaces offer a range of RF cable assemblies to complement our extensive range of PXI, LXI, PCI, VXI and GPIB switching products. All cable assemblies are made from high quality materials and use best practice assembly methods to ensure the cabling matches the performance of the switching modules they support.

product

Cable, 25 Pin 1.27mm Pitch Micro-D, Female to Female, 1m

A025CFR-025CFR-5A100

Pickering Interfaces Inc.

A025CFR-025CFR-5A100 - Pickering Interfaces Inc.

This 1m long female to female 25-Pin Micro-D Cable Assembly is constructed from 18/0.1 (26 AWG) copper wiring with PVC insulation and screening to minimise crosstalk. Screwlocks are provided to secure the connectors to their associated products. This cable assembly is suitable for high density applications including connection to Pickering's LXI DIO/Trigger port.

product

4-Pin Power D-Type Female to Unterminated With Cut Ends

40-972-404-1m-FU

Pickering Interfaces Inc.

40-972-404-1m-FU - Pickering Interfaces Inc.

The 4-Pin Power D-Type Connector to Unterminated Cable Assy is constructed from PVC insulated 56/0.3 (12AWG) Copper wire. The connector can be secured to the product by screwlocks and the unterminated connections are coded to match the connector pin designation.

product

Cable Assembly, 50-Pin D-Type, Male to Unterminated With Ferrules, 1m HV, Exit Towards Pin 1

A050DM5-F-HA100

Pickering Interfaces Inc.

A050DM5-F-HA100 - Pickering Interfaces Inc.

50-Pin D-Type HV Cable assemblies are constructed from 7/0.2 (24 AWG) Tinned Copper Wire with PTFE Type C insulation. The connector assembly can be secured to the mating part by a screwlock. The 50-Pin Female connector options of this product can be directly mated to a corresponding Pickering Interfaces switching product.

product

50 Ohm SMB to SMB Cable Assemblies - 3GHz

Pickering Interfaces Inc.

Pickering Interfaces Inc.

Pickering Interfaces offer a range of RF cable assemblies to complement our extensive range of PXI, LXI, PCI, VXI and GPIB switching products. All cable assemblies are made from high quality materials and use best practice assembly methods to ensure the cabling matches the performance of the switching modules they support.

product

PXI 3A Power MUX BRIC, 4-Channel, 24-Pole

40-571-102

Pickering Interfaces Inc.

40-571-102 - Pickering Interfaces Inc.

The 40-571 is a Power Multiplexer designed to simplify the connection of a common set of test equipment to one of a number of different devices for testing (simultaneous multiple channel selection is possible for most configurations, see switching specifications for restrictions). It is ideal for applications where the equipment needs to conduct the same test process on a series of similar devices one at a time. It is available in a variety of configurations that allow testing with differing number of devices to be tested and different connection widths to suit differing test equipment pin counts.

product

25-Pin D-Type Male Solder Bucket

92-960-025-M

Pickering Interfaces Inc.

92-960-025-M - Pickering Interfaces Inc.

This accessory is designed to allow users to directly terminate a cable with soldered connections to the connector. When the product is used without a backshell users should make their own cable strain relief arrangements and ensure appropriate electrical precautions are observed.

product

Mass Interconnect

Pickering Interfaces Inc.

Pickering Interfaces Inc.

Mass Interconnect is a mechanical interface that simplifies connection between the power supplies, instruments and switching to the Device Under Test (DUT) in a test environment. In the illustration here, a test receiver is connected to the front of the modular instrumentation, in this case, a PXI chassis.

product

PXI Dual SP4T MUX 40GHz 50Ω SMA-2.9

40-784-142

Pickering Interfaces Inc.

40-784-142 - Pickering Interfaces Inc.

Pickering Interfaces’ 40-784 PXI Microwave Multiplexer Modules have a characteristic impedance of 50 Ohm and are capable of switching signals up to 40GHz. Available in single or dual SP6T or SP4T formats, they are suitable for constructing complex microwave switching networks and provide a range of switching configurations to suit most applications. Connection is by high performance front panel mounted SMA or SMA-2.9 connectors

product

LXI Dual 24x8 Video Matrix, SMB (75R)

60-711-002

Pickering Interfaces Inc.

60-711-002 - Pickering Interfaces Inc.

It is designed to provide a simple and scalable bidirectional matrix for video frequencies and is intended for the easy construction of high performance bidirectional matrix switching systems. Software configuration allows the 60-711 to be set as a dual 24 by 8 matrix, a single 48 by 8 matrix and other configurations.

product

PXI/PXIe Microwave Multiplexer, Triple SP4T, 67GHz, 50Ω, SMA-1.85

40-785C-473-E

Pickering Interfaces Inc.

40-785C-473-E - Pickering Interfaces Inc.

The 40-785C-473-E (PXI) and 42-785C-473-E (PXIe) are triple SP4T 67GHz unterminated microwave multiplexers with remotely mounted relays. The 40/42-785C range of multiplexers are available as single or dual, SP6T or SP4T panel mounted multiplexers with relays mounted on the front panel. The single slot version can support up to three supplied remotely mounted multiplexers.

product

PXI High Density MUX BRIC, 4-Chan, 160-Pole

40-570-014

Pickering Interfaces Inc.

40-570-014 - Pickering Interfaces Inc.

product

PXI BRIC4 FIBO Matrix Dual 80x4 3pin brkout

40-592A-004

Pickering Interfaces Inc.

40-592A-004 - Pickering Interfaces Inc.

The 40-592A FIBO (Fault Insertion Break-Out) Matrix Module is a large-scale high density switching matrix based on the Pickering BRIC format. The fault insertion BRICs are designed for applications requiring the simulation of a variety of faults in complex, high pin count, applications involving sensors and control units. Typical faults that can be simulated are open-circuits, short circuits to ground or battery, or short-circuits between input/output lines.

product

160-Pin DIN41612 Connector, Straight PCB Mount, Female

40-963-160-SF

Pickering Interfaces Inc.

40-963-160-SF - Pickering Interfaces Inc.

Accessory allows a user to create their own PCB based termination solution. This connector is not suitable for directly mounting onto a Pickering switching or cabling product.

product

PXI BRIC8 FIBO Matrix Dual 12x2 3pin brkout

40-595A-002

Pickering Interfaces Inc.

40-595A-002 - Pickering Interfaces Inc.

The 40-595A is a matrix module based on the BRIC format that is designed for fault insertion applications in safety critical testing. As with other BRIC modules the matrix size can be scaled to suit the user application. The 40-595 has a very high current rating of 10 Amps, ideal for higher power systems, and can be used as a conventional matrix.