Pickering Interfaces Inc.

product

Cable Assembly, 160-Pin DIN41612, Female to Unterminated With Cut Ends, 0.5m

A1604FR-C-0A050

Pickering Interfaces Inc.

A1604FR-C-0A050 - Pickering Interfaces Inc.

A range of DIN41612 cable assemblies with unterminated connections on one end. For applications in LXI products where 4 connectors are used in a horizontal row if the user requires all connectors to have a second fixing then the right hand connector can be fitted with the optional screwlock assembly 40-969-101.

product

PXI 8 Slot BRIC 66x16 2-pole (6 sub-cards)

40-562A-122-66X16

Pickering Interfaces Inc.

40-562A-122-66X16 - Pickering Interfaces Inc.

This version of our BRIC is part of a range of high-density PXI matrix modules. These modules are available in 2, 4 or 8-slot PXI sizes to suit all high performance matrix requirements and are constructed using instrumentation quality reed relays. With this high level of switching density, these PXI matrix modules allow a complete Functional ATE system to be housed in a single 3U PXI chassis. These BRIC matrix modules allow the use of lower cost 8 or 14-slot PXI chassis.

product

160 Pin DIN 41612 Connector Blocks and Breakouts for Pickering

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector blocks and breakouts below are suitable to use with Pickering cards and modules that utilize a 160-pin DIN 41612 connector.

product

PXI/PXIe High Density Precision Resistor Module, 6-Channel

40-297A-045

Pickering Interfaces Inc.

40-297A-045 - Pickering Interfaces Inc.

The 40-297A-045 (PXI) and the 42-297A-045 (PXIe) are 6-channel programmable resistors with a range of 2.5 Ω to 2.97 MΩ. They are part of the 40/42-297A series of high density precision resistor modules and provide a simple solution for applications requiring accurate simulation of resistive sensors.

product

PXI 4 Slot BRIC 45x16 2-Pole (3 sub-cards)

40-561A-022-45X16

Pickering Interfaces Inc.

40-561A-022-45X16 - Pickering Interfaces Inc.

This version of our BRIC is part of a range of high-density PXI matrix modules. These modules are available in 2, 4 or 8 slot PXI sizes to suit all high performance matrix requirements and are constructed using instrumentation quality reed relays. With this high level of switching density, these PXI matrix modules allow a complete Functional ATE system to be housed in a single 3U PXI chassis. These BRIC matrix modules allow the use of lower cost 8 or 14-slot PXI chassis.

product

PXI 4-slot BRIC Matrix, 96x16, 1 pole (3 Sub-cards)

40-558-401-96x16

Pickering Interfaces Inc.

40-558-401-96x16 - Pickering Interfaces Inc.

The 40-558-401-96x16 matrix is part of a range of BRIC ultra-high-density large PXI matrices are available in 2, 4, 8 or 12-slot PXI sizes to suit all high-performance matrix requirements and are constructed using Pickering Electronics' 4mm x 4mm instrumentation quality reed relays.

product

PXI Microwave Multiplexer, Dual SP8T, 26.5 GHz, 50 Ω, SMA, Remote Mount, Failsafe

40-788-042-E

Pickering Interfaces Inc.

40-788-042-E - Pickering Interfaces Inc.

The 40-788-042-E (PXI) and 42-788-042-E (PXIe) are dual failsafe SP8T 26.5 GHz unterminated microwave multiplexers with remotely mounted relays. The 40/42-788 range of multiplexers are also available as single or dual, SP8T, SP10T or SP12T panel mounted multiplexers with relays mounted on the front panel.

product

PXI 2A Multiplexer, 2-Bank, 64-Channel 1-Pole

40-614-010

Pickering Interfaces Inc.

40-614-010 - Pickering Interfaces Inc.

The 40-614 High Density 2 Amp multiplexer module is available in 20 configurations. All configurations use high quality electro-mechanical signal relays allowing each channel to switch current up to 2A and voltage up to 200VDC/140VACThe module is suitable for signal routing in ATE and data acquisition systems. User connections are made via a front panel 160-pin DIN 41612 connector which is fully supported by our range of cabling and connector solutions.

product

PXI/PXIe RF Switch, Triple SPDT, 3GHz, 50Ω, SMB

40-870A-003

Pickering Interfaces Inc.

40-870A-003 - Pickering Interfaces Inc.

The 40-870A-003 (PXI) and 42-870A-003 (PXIe) are 50Ω RF switches with 3 separate SPDT relays in a single slot. They have low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. The switch banks been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz. The injection of noise and unwanted signals into the signal paths of the 40/42-870A has been minimized by careful attention to the mechanical and electrical design.

product

PXI 5 Banks of 32 Channel 1 Pole MUX

40-615-022-5/32/1

Pickering Interfaces Inc.

40-615-022-5/32/1 - Pickering Interfaces Inc.

High density multiplexer modules featuring a wide range of switching configurations, especially useful where a large number of small multiplexers are required. Typical applications include signal routing in ATE and data acquisition systems. Each module is factory configured into one of the configuration modes. Connections are made via a front panel 200-pin connector.

product

PXI BRIC8 FIBO Matrix Dual 30x2 3pin brkout

40-595A-005

Pickering Interfaces Inc.

40-595A-005 - Pickering Interfaces Inc.

The 40-595A is a matrix module based on the BRIC format that is designed for fault insertion applications in safety critical testing. As with other BRIC modules the matrix size can be scaled to suit the user application. The 40-595 has a very high current rating of 10 Amps, ideal for higher power systems, and can be used as a conventional matrix.

product

PXI/PXIe Power Relay Module, 16xSPDT

40-158-003-HI

Pickering Interfaces Inc.

40-158-003-HI - Pickering Interfaces Inc.

The 40/42-158-003-HI is a PXI/PXIe high density power relay module with 16xSPDT switches rated at 5A and includes the hardware interlock option. User connection is via a 50-pin SGMC male connector, hardware interlock is via a 4-pin 00 series socket (mating plug is supplied). The 40/42-158 range is available in 8, 16, 24 or 32 SPST configurations with or without hardware interlock. Electro-mechanical power relays are used which are suitable for switching loads up to 5A at 250VAC.

product

PXI/PXIe Microwave Multiplexer, Triple SP4T, 26.5GHz, 50Ω, SMA, Remote Mount

40-784B-133-E

Pickering Interfaces Inc.

40-784B-133-E - Pickering Interfaces Inc.

The 40-784B-133-E (PXI) and 42-784B-133-E (PXIe) are triple SP4T 26.5GHz unterminated microwave multiplexers with remotely mounted relays. The 40/42-784B range is available with single, dual or triple, SP6T or SP4T multiplexers with front panel mounted or remotely mounted relays.

product

PXI/PXIe Microwave Multiplexer, Single SP4T, 26.5 GHz, 50 Ω, SMA, Remote Mount, Failsafe

42-784B-131-E

Pickering Interfaces Inc.

42-784B-131-E - Pickering Interfaces Inc.

The 40-784B-131-E (PXI) and 42-784B-131-E (PXIe) are single failsafe SP4T 26.5 GHz unterminated microwave multiplexers with remotely mounted relays. The 40/42-784B range is available with single, dual or triple, SP6T or SP4T multiplexers with front panel mounted or remotely mounted relays.

product

PXI Breadboard Module, 1-Slot, 96-Pin Micro-D

40-220A-001

Pickering Interfaces Inc.

40-220A-001 - Pickering Interfaces Inc.

The 40-220A series of breadboard modules allow the user to construct their own circuit in situations where a suitable PXI module is not available. For example when it is required to integrate a non-switching function into a PXI chassis. Typical applications include: Creating custom circuitry that can be housed in on a 3U board, or to build special –one-off” switching modules.