Showing recent results 1321 - 1335 of 3239 products found.
-
40-834-002 - Pickering Interfaces Ltd.
The 40-834 is a 75 Ohm 8 to 1 RF MUX available with 1 or 2 banks in a single PXI slot. All versions have been designed to exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The design of the 40-834 minimizes the injection of noise and unwanted signals into the signal path by careful attention to the mechanical and electrical design.
-
40-515-002 - Pickering Interfaces Ltd.
The 40-515/516/517 2 Amp, 2-Pole Matrix Modules form part of the System 40 PXI ProgrammableSwitching system. Each module consists of a matrix of 64 2-pole electro-mechanicalrelays under the control of a PXI/PCI interface.These modules are designed for switching medium voltage/power signals in test applicationswhere reed relays do not have sufficient rating. They are also suitable for telecomsapplications where send and return signals need to be switched simultaneously.
-
40-190B-202 - Pickering Interfaces Ltd.
This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.
-
40-190B-102 - Pickering Interfaces Ltd.
This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.
-
40-190B-002 - Pickering Interfaces Ltd.
This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.
-
40-780A-512 - Pickering Interfaces Ltd.
This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).
-
40-780A-522 - Pickering Interfaces Ltd.
This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).
-
40-781-122 - Pickering Interfaces Ltd.
The 40-781 Microwave switching module consists of one, or two changeover switches capable of switching frequencies to 18GHz in 50 Ohm. Versions are available with either internal or external terminations and connections are made via front panel mounted high quality SMA RF coaxial connectors.
-
40-781-022 - Pickering Interfaces Ltd.
This dual microwave SPDT relay module is part of the 40-781 range that consists of one or two changeover switches capable of switching frequencies to 18GHz in 50 Ohm. Versions are available with either internal or external terminations and connections are made via front panel mounted high quality SMA RF coaxial connectors.
-
40-780A-752 - Pickering Interfaces Ltd.
This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).
-
40-780A-532 - Pickering Interfaces Ltd.
This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).
-
40-780A-542 - Pickering Interfaces Ltd.
This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).
-
40-780A-552 - Pickering Interfaces Ltd.
This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).
-
40-780A-562 - Pickering Interfaces Ltd.
This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).
-
40-782A-522 - Pickering Interfaces Ltd.
This range of PXI microwave transfer switch modules has a characteristic impedance of 50 and is available in versions with maximum operating frequencies of 18GHz, 26.5GHz or 40GHz. Connections are made via front panel mounted high quality RF coaxial connectors, SMA or SMA 2.9, depending upon the frequency range. Transfer switches have four ports with two possible switch states. In the default (de-energized) state, ports 1 to 2 and 3 to 4 have signal paths between them. In the energized state the signal paths are between ports 1 to 3 and 2 to 4 (see diagrams on data sheet). Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required.
