Showing recent results 1021 - 1035 of 2357 products found.
-
40-198-001 - Pickering Interfaces Ltd.
The 40-198 is a 20 Channel Fault Insertion switch, primarily designed for the simulation of fault conditions in automotive/avionics applications involving the reliability testing of safety critical controllers.
-
40-198-002 - Pickering Interfaces Ltd.
The 40-198 is a 20 Channel Fault Insertion switch, primarily designed for the simulation of fault conditions in automotive/avionics applications involving the reliability testing of safety critical controllers.
-
40-196-101 - Pickering Interfaces Ltd.
The 40-196 is a 10 Channel 5A Fault Insertion Switch, primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert different fault conditions between the test fixture and the equipment under test: Open-Circuit, Short-Circuit between signal pairs, Short-Circuit between signal pairs and user applied fault conditions e.g. Power or GND. Shorting relays on each channel enable UUT signals to be subjected to external user applied fault conditions or to be shorted to the adjacent signal in the same channel. Relays in line with the signal allow open circuit conditions to be simulated on either side or both sides of a channel signal pair. The switching topology of the 40-196 allows channels to be interconnected so that complex fault insertion systems can be constructed.
-
41-661-001 - Pickering Interfaces Ltd.
High voltage attenuators designed to reduce the high output voltages commonly generated by some types of sensors
-
40-755-005 - Pickering Interfaces Ltd.
The 40-755 range is a 50 Ohm high-density RF multiplexer (4 to 1) array available with up to 10 MUXs in a single PXI module. It is available with two connector options, an SMB connector that provides a frequency range of 1.8GHz and is available in single or dual PXI slots, or a multiway connector which limits the bandwidth to 500MHz but offers a high density solution occupying just one PXI slot. The RF switch design is identical in each case. Each design in the 40-755 range offers low insertion loss and low VSWR through its usable frequency range and each multiplexer has been designed to have a nominally path independent loss. The array of 4 to 1 switches can be configured into alternative configurations through the use of external cabling.
-
40-411-001 - Pickering Interfaces Ltd.
The 40-411 is the perfect solution for driving external relays from a PXI system or from Pickering Interfaces LXI modular chassis. Each module provides 64 channels of low side switching for external relays. Users need to simply connect a positive voltage source to one side of the relay coil and the other side to the 40-411 output. Each output is capable of sinking up to 1 Amp of continuous current.
-
40-527-001 - Pickering Interfaces Ltd.
The 40-527, 40-528A and 40-529A are PXI single-pole matrices each supporting 128 crosspoints. The modules are designed for switching medium voltage and power signals. The user signal connection is via a robust 78, 50 or 37 pin D-Type connector that is fully supported by the wide range of Pickering Interfaces cable and connector accessories.
-
40-585-001 - Pickering Interfaces Ltd.
Our model 40-585, along with the following models40-584, 40-586A, 40-587Aare high-density single pole PXI matrices each supporting 256 crosspoints. All models use gold-plated contact electromechanical relays. The PXI matrix modules are designed for switching medium voltage and power signals. The user signal connection is via a robust 78, 50 or 37 pin D-Type or 160 pin DIN 41612 connector that is fully supported by the wide range of our cable and connector accessories.
-
40-182-011 - Pickering Interfaces Ltd.
Supports 6 off high current SPST switches into two PXI slots or 3 off high current SPST switches into one PXI slot. Each SPST switch uses a fully isolated solid state relay which has been designed to offer fast operation under hot switching conditions and high inrush current with no operational life degradation. Each SPST switch can support 10A of continuous current and switch up to 200V signals. The switch can sustain inrush currents in excess of 50A. AC or DC signals can be switched since the switch is polarity insensitive.
-
40-183-011 - Pickering Interfaces Ltd.
The 40-183 supports 6 off high current SPST switches into two slots of PXI chassis. Each SPST switch uses a fully isolated solid state relay which has been designed to offer fast operation under hot switching conditions and high inrush current with no operational life degradation. Each SPST switch can support 30A of continuous current and switch up to 40V signals. The switch can sustain inrush currents in excess of 120A. AC or DC signals can be switched since the switch is polarity insensitive. Note: The 40-183-011 supersedes the 40-183-001 which is functionally the same but with some changes in specification. A data sheet for the 40-183-001 can be found in the 40-182/183 User Manual.
-
41-752-001 - Pickering Interfaces Ltd.
6 Power Supplies In A Single PXI Slot Independent Sense Connections Ideal For Battery Stack Emulation 750V Independent Isolation Barriers Up To 300mA Output Per Simulator Battery Charging Emulation To 100mA Uses Backplane Power Sources Hardware Shutdown Control VISA and IVI Drivers Supplied For Windows XP/Vista/7/8 and Soft Front Panel Use In Pickering 19 Slot PXI Chassis Or 18 Slot LXI Chassis
-
40-183A-011 - Pickering Interfaces Ltd.
The 40-183A-011 has 6 high current SPST switches in two PXI chassis slots. Each SPST switch uses a fully isolated solid state relay which has been designed to offer fast operation under hot switching conditions and high inrush current with no operational life degradation. Each SPST switch can support 30A of continuous current and switch up to 40V signals. The switch can sustain inrush currents in excess of 120A. AC or DC signals can be switched since the switch is polarity insensitive.
-
41-182-006 - Pickering Interfaces Ltd.
A programmable RF attenuator module that supports 3 (one slot) or 6 (two slots) attenuators each capable of inserting an additional loss of 0 to 31.75dB in 0.25dB steps. Each attenuator uses solid state switches for a long service life and fast operation with minimum settling time and no signal bounce.
-
41-182A-006 - Pickering Interfaces Ltd.
The 41-182A-006 is a programmable RF attenuator module that hasr 6 channels in 2 slots each capable of inserting a signal loss of 0 to 31.75dB in 0.25dB steps. Each attenuator uses solid state switches for a long service life and fast operation with minimum settling time and no signal bounce.
-
41-182-003 - Pickering Interfaces Ltd.
A programmable RF attenuator module that supports 3 (one slot) or 6 (two slots) attenuators each capable of inserting an additional loss of 0 to 31.75dB in 0.25dB steps.
