Pickering Interfaces Inc.

product

PCI 32x2 2Amp High Density Matrix Card

50-527-001

Pickering Interfaces Inc.

50-527-001 - Pickering Interfaces Inc.

The 50-527, 50-528 and 50-529 are a range of PCI single pole matrix cards supporting either 64 or 128 crosspoints using electro-mechanical relays. They are capable of switching voltages up to 300VDC/250VAC and current up to 2A.

product

PXI MUX 4 Banks of 16 Channel 2 Pole

40-610-022-4/16/2

Pickering Interfaces Inc.

40-610-022-4/16/2 - Pickering Interfaces Inc.

This series of high density multiplexer modules feature a wide range of switching configurations, especially useful where a large number of small multiplexers are required. Typical applications include signal routing in ATE and data acquisition systems. Connections are made via a front panel 200-pin connector. Inter-bank linking relays allow multiplexer size to be increased in multiples of in multiples of three by joining the common terminals of adjacent banks. Closing one linking switch produces a 6-channel multiplexer, closing all linking switches produces an 54-channel multiplexer

product

LXI Microwave Multiplexer, SP6T, 14-Bank, 18GHz, 50Ω, SMA

60-800-114

Pickering Interfaces Inc.

60-800-114 - Pickering Interfaces Inc.

Our 60-800-114 is a 14 bank terminated SP6T multiplexer and is part of a range of LXI based microwave multiplexers suitable for switching 50 ohm signals up to 18GHz. The 60-800 range is capable of supporting up to 14 banks of 6 channel terminated multiplexers and is ideal for constructing complex microwave switching systems for many applications. Connection is by high performance front panel mounted SMA, SMA-2.9, SMA-2.4 or SMA-1.85 connectors.

product

PXI 3A Power MUX BRIC, 3-Channel, 16-Pole

40-571-201

Pickering Interfaces Inc.

40-571-201 - Pickering Interfaces Inc.

The 40-571 is a Power Multiplexer designed to simplify the connection of a common set of test equipment to one of a number of different devices for testing (simultaneous multiple channel selection is possible for most configurations, see switching specifications for restrictions). It is ideal for applications where the equipment needs to conduct the same test process on a series of similar devices one at a time. It is available in a variety of configurations that allow testing with differing number of devices to be tested and different connection widths to suit differing test equipment pin counts.

product

PXI MUX 2 Bank, 32 Channel Screened 1 Pole

40-610-021-S-2/32/1

Pickering Interfaces Inc.

40-610-021-S-2/32/1 - Pickering Interfaces Inc.

This series of high density multiplexer modules feature a wide range of switching configurations, especially useful where a large number of small multiplexers are required. Typical applications include signal routing in ATE and data acquisition systems. Connections are made via a front panel 200-pin connector. Inter-bank linking relays allow multiplexer size to be increased in multiples of in multiples of three by joining the common terminals of adjacent banks. Closing one linking switch produces a 6-channel multiplexer, closing all linking switches produces an 54-channel multiplexer

product

PXI 32 Channel I/O, High and Low Side Driver

40-413-003

Pickering Interfaces Inc.

40-413-003 - Pickering Interfaces Inc.

The 40-413 range is available in three configurations, a high side only, a low side only and a combined high and low side (shown here) –each capable of driving 2A loads. Each output is fully protected against over-voltage, over-current and thermal overload, ensuring robust and reliable operation in the toughest test environments.

product

PXI RTD Simulator Module, 16 Channel, PT100

40-263-201

Pickering Interfaces Inc.

40-263-201 - Pickering Interfaces Inc.

The 40-263-201 is a 16-channel PT100 RTD Simulator. The 40-263 range is a cost effective method of simulating PT100, PT500 or PT1000 RTDs. It supports 4, 8, 12, 16, 20 or 24 channels in one or two PXI slots. Also, channels are able to be set as short or open circuit to simulate faulty wiring to a sensor.

product

Quad 4 To 1 Terminated 50Ω 600MHz PXI RF Multiplexer

40-761A-004

Pickering Interfaces Inc.

40-761A-004 - Pickering Interfaces Inc.

The 40-761A-004 terminated quad 4 to 1 multiplexer is part of a range of RF multiplexers available in the following configurations: dual, quad and octal 4 to 1, single, dual and quad 8 to 1, single and dual 16 to 1 and single 32 to 1. All multiplexers have the option of automatic terminations which offer advantages at system level by reducing the presence of standing waves in the system which can cause degradation in isolation and crosstalk.

product

PXI/PXIe Battery Simulator Module, 4-Channel

41-752A-002

Pickering Interfaces Inc.

41-752A-002 - Pickering Interfaces Inc.

Targeting EV, automotive, aerospace, energy storage and electric aircraft applications, the new battery simulator modules occupy a single PXI slot. These 4-channel battery simulators are capable of supplying up to 7 V and 300 mA per channel. The channels are fully isolated from ground and from each other, allowing series connection to simulate batteries in a stacked architecture.

product

Octal 4 to 1 50 600MHz PXI RF Multiplexer

40-760-008

Pickering Interfaces Inc.

40-760-008 - Pickering Interfaces Inc.

This octal 4 to 1 multiplexer is part of a range of RF multiplexers available in the following configurations: dual, quad and octal 4 to 1, single, dual and quad 8 to 1, single and dual 16 to 1 and single 32 to 1. All multiplexers have the option of automatic terminations which offer advantages at system level by reducing the presence of standing waves in the system which can cause degradation in isolation and crosstalk.

product

Cable Assy 37-Pin D-Type F/F 2m

40-970-037-2m-FF

Pickering Interfaces Inc.

40-970-037-2m-FF - Pickering Interfaces Inc.

The 37-Pin D-Type cable assembly is constructed from 19/0.18 (21AWG) Tinned Copper Wire. Screwlocks are provided to secure the cable to its associated products. The 37-Pin Female connector option of this cable assembly is suited for direct connection to Pickering Interfaces products.

product

PXI/PXIe Microwave Multiplexer, Single SP8T, 40 GHz, 50 Ω, SMA 2.9, Terminated, Remote Mount

42-788-051-TE

Pickering Interfaces Inc.

42-788-051-TE - Pickering Interfaces Inc.

The 40-788-051-TE (PXI) and 42-788-051-TE (PXIe) are single SP8T 40 GHz microwave multiplexers with automatic termination of unused signals and remotely mounted relays.

product

PXI High Density MUX BRIC, 48-Chan, 10-Pole

40-570-413

Pickering Interfaces Inc.

40-570-413 - Pickering Interfaces Inc.

product

8-Slot Fully Hybrid PXIe Chassis

42-924-001

Pickering Interfaces Inc.

42-924-001 - Pickering Interfaces Inc.

Our 42-924 PXIe Chassis provides seven hybrid compatible slots for application flexibility. The chassis utilizes a single PCI segment with a dedicated PCIe-to-PCI bridge module for the hybrid slots. The PXI specific high accuracy clocks and trigger signals are generated and controlled by an independent clock module attached to the rear of the backplane. This hybrid chassis supports the latest generation (Gen 3) PXIe modules. The chassis is fitted with a 400W industrial grade power supply mounted at the rear of the unit with sufficient capacity to support PXI modules with very high current demands.

product

Modular Breakout System Chassis Mounting Frame

95-901-001

Pickering Interfaces Inc.

95-901-001 - Pickering Interfaces Inc.

The Modular Breakout System is designed to Simplify HILS (Hardware In the Loop Simulation) Applications. This low-cost system combines a BoB (Breakout Box) feature set with the added flexibility of an FIU (Fault Insertion Unit). By mating the FIU chassis directly to the BoB, cabling is minimized, creating a more compact reliable design and improving signal integrity.