Pickering Interfaces Inc.

product

PXI 2A Multiplexer, 4-Bank, 8-Channel 4-Pole

40-614-008

Pickering Interfaces Inc.

40-614-008 - Pickering Interfaces Inc.

The 40-614 High Density 2 Amp multiplexer module is available in 20 configurations. All configurations use high quality electro-mechanical signal relays allowing each channel to switch current up to 2A and voltage up to 200VDC/140VACThe module is suitable for signal routing in ATE and data acquisition systems. User connections are made via a front panel 160-pin DIN 41612 connector which is fully supported by our range of cabling and connector solutions.

product

PXI Opto-Iso Digital I/O 32bit out 16bit in

40-491-002

Pickering Interfaces Inc.

40-491-002 - Pickering Interfaces Inc.

The 40-490 Digital I/O Modules are designed for applications requiring optically isolated digital I/O, typically in industrial automation. This modules features 32 digital outputs and 16 digital inputs which may be programmed by word or individual bit. Power for the isolated section of the module is built onto the board in model 40-490-001, or this can be supplied externally in model 40-490-002.

product

SIMRC - SMB RF Adapter PCB

1092-001

Pickering Interfaces Inc.

1092-001 - Pickering Interfaces Inc.

Our small format embedded switching (SIM relay) cards offer a choice of switching configurations using low cost industry standard SIM connectors. They free the designer from the detail of routing complex switching circuits, you may select from a wide range of cards using the built in RS-232 and I2C interfaces. These low-cost embedded switching cards are intended to be mounted on to a simple motherboard. They may be used to construct very high density switching networks. SIM based switching cards also allow for very simple in-field maintenance.

product

PXI 12-Slot BRIC Matrix, 352x16 1-Pole (11 sub-cards)

40-558-121-352X16

Pickering Interfaces Inc.

40-558-121-352X16 - Pickering Interfaces Inc.

The 40-558-121-352x16 matrix is part of a range of BRIC ultra-high-density large PXI matrices are available in 2, 4, 8 or 12-slot PXI sizes to suit all high-performance matrix requirements and are constructed using Pickering Electronics' 4mm x 4mm instrumentation quality reed relays.

product

PXI 8x4 Power Matrix, 2 Pole

40-550-002

Pickering Interfaces Inc.

40-550-002 - Pickering Interfaces Inc.

Connections are made via a front panel 37-way D-Type male connector or two 20-way GMCT male connectors. Used for switching inductive/capacitive loads up to 5A at 250VAC. Power matrix modules are intended for switching heavy AC or DC loads or for slaving up to large external relays, contactors and solenoids. Used for applications requiring switching of either mains voltage or direct current. These modules are fitted with electro-mechanical power relays, gold-flash over silver alloy. A spare relay is built onto the circuit board to facilitate easy maintenance with minimum downtime.

product

PXI 2 Amp MUX, Dual 8-Channel 2-Pole

40-635-106

Pickering Interfaces Inc.

40-635-106 - Pickering Interfaces Inc.

The 40-635 2 Amp Multiplexer module is available in 9 standard configurations as well as 9 half density configurations, all using high quality electro-mechanical signal relays allowing each channel to switch current up to 2A and voltage up to 300VDC/250VAC.The module is suitable for signal routing in ATE and data acquisition systems. Connections are made via a front panel 78-way D-type connector.

product

PXI/PXIe High Density Precision Resistor Module, 18-Channel

40-297A-015

Pickering Interfaces Inc.

40-297A-015 - Pickering Interfaces Inc.

The 40-297A-015 (PXI) and the 42-297A-015 (PXIe) are 18-channel programmable resistors with a range of 1 Ω to 920 Ω. They are part of the 40/42-297A series of high density precision resistor modules and provide a simple solution for applications requiring accurate simulation of resistive sensors.

product

22 Pin REDEL Cables - Connector to Unterminated for Pickering

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to unterminated cable assemblies below are suitable to use with Pickering cards and modules that utilize a 22-pin REDEL connector.

product

PXI Single 4 to 1 RF Multiplexer, 8GHz 50 Ohm SMA, Terminated

40-882A-001

Pickering Interfaces Inc.

40-882A-001 - Pickering Interfaces Inc.

The 40-882A-001 is a single 50Ω 4 to 1 RF multiplexer with 8GHz bandwidth. The 40-882A range of multiplexers have automatic termination of unused signals and are available as a single MUX in one PXI slot, a dual MUX in two PXI slots, or triple and quad MUXs in three slot PXI modules.

product

500-Pin SEARAY Cable Assembly, Male to Unterminated, Ferrules, 2 Amp, 0.5m, 250 Port

A500RMR-F-5C050

Pickering Interfaces Inc.

A500RMR-F-5C050 - Pickering Interfaces Inc.

The 500-Pin SEARAY connector is used on switching products to provide a very high density 2A connector solution that is suitable for use to 200VDC. This cable assembly is suitable for direct connection to Pickering Interfaces products. Unterminated connections are provided at the other end of the cable for a variety of applications. Screwlocks enable the SEARAY connector to be secured to its mating product.

product

PXI/PXIe RF Matrix, 16x2, 300 MHz, 50 Ω SMB

42-728A-001

Pickering Interfaces Inc.

42-728A-001 - Pickering Interfaces Inc.

The 40-728A-001 (PXI) and 42-728A-001 (PXIe) are 16x2 50 Ω RF matrices with SMB connectors. The 4x-727A/728A/729A range are high density RF matrix modules suitable for switching up to 300 MHz in 50 Ω or 100 MHz in 75 Ω. They are available in 50 Ω or 75 Ω versions with SMB connectors or in 50 Ω versions with a multiway connector. They provide a simple and scalable bidirectional matrix for RF signals and are intended for the construction of high performance switching systems.

product

PXI 4 Slot BRIC 60x8 1-Pole (2 sub-cards)

40-561A-021-60X8

Pickering Interfaces Inc.

40-561A-021-60X8 - Pickering Interfaces Inc.

This version of our BRIC is part of a range of high-density PXI matrix modules. These modules are available in 2, 4 or 8 slot PXI sizes to suit all high performance matrix requirements and are constructed using instrumentation quality reed relays. With this high level of switching density, these PXI matrix modules allow a complete Functional ATE system to be housed in a single 3U PXI chassis. These BRIC matrix modules allow the use of lower cost 8 or 14-slot PXI chassis.

product

PXI/PXIe Microwave Multiplexer, Single SP6T, 3GHz, 50Ω, N-Type, Remote Mount

40-785C-561-E

Pickering Interfaces Inc.

40-785C-561-E - Pickering Interfaces Inc.

The 40-785C-561-E (PXI) and 42-785C-561-E (PXIe) are single SP6T 3GHz unterminated microwave multiplexers with remotely mounted relays. The 40/42-785C range of multiplexers are available as single or dual, SP6T or SP4T panel mounted multiplexers with relays mounted on the front panel. The single slot version can support up to three supplied remotely mounted multiplexers.

product

PXI/PXIe Microwave Relay, Single SPDT, 50 GHz, 50 Ω, SMA-2.4, External Termination, Failsafe, Remote Mount

40-781A-721-E

Pickering Interfaces Inc.

40-781A-721-E - Pickering Interfaces Inc.

The 40-781A-721-E (PXI) and 42-781A-721-E (PXIe) are single failsafe SPDT 50 GHz microwave relay modules with external terminations and remotely mounted relays. The 40/42-781A range is available with one or two SPDT switches capable of switching frequencies up to 50 GHz in 50 Ω. They are available with either internal or external terminations and connections are via front panel mounted high quality SMA, SMA 2.9 or SMA 2.4 connectors.

product

4-Slot BRIC, 192x8, 1 Pole, PXI Matrix (3 Sub-cards)

40-559-401-192x8

Pickering Interfaces Inc.

40-559-401-192x8 - Pickering Interfaces Inc.

This range of BRIC ultra-high-density large PXI matrices are available in 2, 4 or 8-slot PXI sizes to suit all high-performance matrix requirements and are constructed using Pickering Electronics' 4mm x 4mm instrumentation quality reed relays.