Showing recent results 1801 - 1815 of 2357 products found.
-
40-852-218 - Pickering Interfaces Ltd.
Pickering PXI Fiber Optic MEMS Switching modules are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.
-
40-485-021 - Pickering Interfaces Ltd.
Available as 1 or 2 banks of 8 or 16 switch simulator channelsSimulates Leaky or Dirty SwitchesProtects UUT From Fault ConditionsRobust Design Protects Against Faults In DUTSuitable for 12V and 24V SystemsSuitable for Switch Simulation in Transport Electronics Module TestingVISA, IVI and Kernel Drivers Supplied for WindowsSupported by PXI or LXI Chassis
-
40-883-001 - Pickering Interfaces Ltd.
A 50 Ohm 6GHz multiplexer available as an 8 to 1 MUX in a two slot PXI module or a 16 to 1 MUX in a three slot PXI module. It exhibits low VSWR over the full operating frequency range and consistent and flat insertion loss characteristics. The use of solid state switches ensure a long service life with no wear out mechanism, making it ideal for ATE systems requiring frequent and fast operating RF switching. This RF Multiplexer can handle RF input powers of up to +30dBm and is able to sustain frequent hot switching without performance degradation.
-
40-883A-001 - Pickering Interfaces Ltd.
The 40-883A-001 is a single 8 to 1 50Ω RF multiplexer with 8GHz bandwidth and automatic terminationof unused signal channels. It is available in 8 to 1 and 16 to 1 configurations in two and three PXI slots respectively.. It exhibits low VSWR over the full operating frequency range and consistent and flat insertion loss characteristics. The use of solid state switches ensure a long service life with no wear out mechanism, making it ideal for ATE systems requiring frequent and fast operating RF switching. This RF Multiplexer can handle RF input powers of up to +36dBm and is able to sustain frequent hot switching without performance degradation.
-
40-834-101 - Pickering Interfaces Ltd.
The 40-834 is a 75 Ohm 8 to 1 RF MUX available with 1 or 2 banks in a single PXI slot. All versions have been designed to exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The design of the 40-834 minimizes the injection of noise and unwanted signals into the signal path by careful attention to the mechanical and electrical design.
-
40-834-001 - Pickering Interfaces Ltd.
The 40-834 is a 75 Ohm 8 to 1 RF MUX available with 1 or 2 banks in a single PXI slot. All versions have been designed to exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 3GHz with each path having a nominally equal insertion loss. The design of the 40-834 minimizes the injection of noise and unwanted signals into the signal path by careful attention to the mechanical and electrical design.
-
40-549-004 - Pickering Interfaces Ltd.
The 40-549 is a single pole power matrix module, suitable for switching inductive/capacitiveloads up to 5A with 110VDC/250VAC hot switching and 400VDC/250VAC cold switching.It is available in single 16x4, single 8x8, dual 8x4 or single 8x4 configurations.Connections are made via a front panel 25 way D-type male connector.
-
40-190B-201 - Pickering Interfaces Ltd.
This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.
-
40-190B-101 - Pickering Interfaces Ltd.
This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.
-
40-190B-001 - Pickering Interfaces Ltd.
This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is single bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.
-
40-780A-511 - Pickering Interfaces Ltd.
This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).
-
40-780A-521 - Pickering Interfaces Ltd.
This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).
-
40-781-121 - Pickering Interfaces Ltd.
This single microwave SPDT relay module is part of the 40-781 range that consists of one or two changeover switches capable of switching frequencies to 18GHz in 50 Ohm. Versions are available with either internal or external terminations and connections are made via front panel mounted high quality SMA RF coaxial connectors.
-
40-781-021 - Pickering Interfaces Ltd.
This single microwave SPDT relay module is part of the 40-781 range that consists of one or two changeover switches capable of switching frequencies to 18GHz in 50 Ohm. Versions are available with either internal or external terminations and connections are made via front panel mounted high quality SMA RF coaxial connectors.
-
40-780A-751 - Pickering Interfaces Ltd.
This PXI microwave module is part of a range that gives you the highest RF & microwave switching performance available. Applications are mainly in the microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra high isolation are critical, they may also be used for lower frequency RF applications where power handling to 240W is required (700W for N-Type options).
