Testblox AB
Testblox AB was created to make professional instrumentation a natural part of the test fixture. The company brings together three complementary perspectives: Pickering’s experience in modular switching and instrumentation, Wireflow AB’s expertise in fixtures and functional test systems, and Ohrwall Group AB’s operational leadership.
- +46 739 628 478
- info@testblox.com
- Bälggatan 2
Varberg, 432 32
Sweden
-
Product
Switching Module, SPST 60V 2A, 16 Channels
PK01-004-202
-
The PK01-004 Switching Module is equipped with sixteen electro-mechanical SPST relay channels, capable of switching voltages up to 60V and currents up to 2A. This module is designed for compact, higher-current signal control, making it ideal for dense functional testers where commercial off-the-shelf (COTS) switching can be directly mounted in the fixture. With operational speeds of less than 3 ms, the PK01-004 is adept at managing both AC and DC medium power loads, while the use of palladium-ruthenium, gold-covered contacts ensures reliability for low-level signals and high current conditions. The module's design allows for individual relay use or interconnection to form more complex switching networks, catering to various applications. It also comes with driver support for both Windows and Linux, and a warranty of three years, making it a robust choice for various switching applications.
-
Product
Multi-Protocol Adapter Module, SPI/I²C/UART/RS485
TB31-001-202
-
The Testblox TB31-001 is a versatile multi-protocol communications module designed for device under test (DUT) interfacing. Offering SPI, I2C, UART, and RS485 interfaces, this module facilitates seamless integration of board-level serial communication into testing fixtures. It enables test systems to communicate with modern DUTs without the need for additional or custom hardware. Additionally, the TB31-001 boasts two SPI ports operating as master or slave with up to 8 chip selects, two I2C controllers complete with interrupt inputs, and two UARTs, optimized with RTS/CTS flow control. Moreover, it features two RS485 ports that include switchable termination for enhanced flexibility in connectivity. The module supports programmable logic levels of 1.8V, 2.5V, 3.3V, and 5V, ensuring compatibility with various DUT requirements, while all interfaces share a common logic level, safeguarding the DUT side until the host configuration is implemented. The TB31-001 is isolated from backplane ground, providing robust performance in testing environments.
-
Product
Multifunction I/O Demonstrator Module, AI/DIO/AO/MUX/Relay
PK15-002-203
-
The Multifunction I/O Demonstrator Module (PK15-002-203) is designed as a versatile testing platform, integrating low-voltage analog input, analog output, digital I/O, multiplexing, and general-purpose relays. This powerful demonstrator module allows users to evaluate Testblox, prototype fixture concepts, and quickly validate the value of in-fixture instrumentation. The module features an 8-Bit Digital I/O and includes a Quad 3-Channel Multiplexer alongside 4 SPDT Relays, performing seamless conversions with its Analog-to-Digital Converter (ADC) and Digital-to-Analog Converter (DAC). With connectivity via USB and optional access through a 44-pin D-type connector or direct connections, the PK15-002 is built for flexibility in various testing environments, driven by Windows and Linux compatible drivers. Additionally, this module comes with a robust 3-year warranty that underscores its reliability and durability in demanding operational conditions.
-
Product
Switching Module, SPDT 60V 1A, 8 Channels
PK01-005-202
-
The PK01-005 Switching Module is designed with eight SPDT relay channels, capable of handling up to 60V and 1A, to facilitate flexible selection between alternate signal paths, loads, or measurement points. Equipped with high-quality ruthenium reed relays from Pickering Electronics, this module excels in reliability and performance for applications requiring low-level signal switching and long service life. Its advanced capabilities include fast operation speeds of 250 µs, and a switching architecture that can be configured for simple or complex networks, making it an ideal choice for compact test setups.
-
Product
Switching Module, DPST 60V 1A, 6 Channels
PK01-007
-
The PK01-007 is a versatile and affordable general-purpose DPST (Double Pole Single Throw) relay module comprising six channels capable of switching voltages up to 60V and currents up to 1A. This module is well-suited for applications where maintaining short and controlled signal paths is critical, thanks to its high-quality instrument-grade ruthenium reed relays manufactured by Pickering Electronics. Each DPST relay operates with a maximum current of 1A, and the module features a rapid operating speed of 250 µs, making it ideal for low-level signal switching. Its design includes options for both edge connector and front panel access via a 44-pin D-type connector, ensuring flexible integration into various systems. With a robust operational life expectancy exceeding 1 billion operations under low power loads, the PK01-007 promises reliability and durability across multiple applications.
-
Product
Switching Module, DPST 60V 2A, 6 Channels
PK01-008-203
-
DPST 60V 2A, 6 Channels from Testblox provides versatile and efficient switching capabilities for both signal and power-path applications. This module, featuring six 60V, 2A DPST relay channels, replaces custom fixture electronics with supported, repeatable in-fixture instrumentation. It is capable of switching voltages up to 60V and currents up to 2A, making it ideal for medium-power AC and DC loads. The electromechanical relays include high-quality palladium-ruthenium, gold-covered contacts suitable for low-level signals and are designed for a long operational life. With an operating speed of less than 3 ms and equipped with drivers for both Windows and Linux, the Switching Module is a robust solution for functional testing needs. The module can be accessed via a 44-pin D-type connector or directly through its edge connector, allowing for flexibility in setup and integration.
-
Product
Analog Output Module, ±10V, 8 Channels
TB17-001-201
-
The TB17-001 is an 8-channel ±10 V analog output module from Testblox, designed for generating fixture-native stimulus signals efficiently within the testing environment. With a resolution of 16 bits, it ensures high precision in outputs, capable of updating at rates of up to 200 kS/s. This module eliminates the need for larger racks or custom DAC hardware, making it a compact and effective solution for controlled analog outputs within the tester. It features robust protections against short circuits and isolation from backplane ground, contributing to its reliability in various operational scenarios. Factory calibrated for accuracy, the TB17-001 is an essential component for those in need of dependable analog signal generation.
-
Product
4 Sets Of Module Guides For Direct PCB Connectivity
TB82-002
-
Module guides for direct PCB connectivity help retain Testblox modules in the fixture and enable individual modules to be removed for maintenance and service, making direct board-level integration cleaner and easier. Assembly images show installation examples. Modules, backplanes and other circuit boards shown are not included.
-
Product
Digital I/O Module, 24V, 24 Channels
WF11-002-202
-
The WF11-002 is a versatile 24-channel, 24V digital I/O module in the Testblox family, specifically designed for industrial control and status signaling in production fixtures. It integrates seamlessly with sensors, actuators, and DUT (Device Under Test) interfaces, making it ideal for compact functional testing environments. Each of the 24 channels can function as digital inputs, while 12 are capable of sourcing and 12 of sinking outputs, enabling robust communication and control capabilities. Additionally, six channels can measure pulse characteristics such as duty cycle, pulse width, frequency, and pulse count. With outputs that are protected against over-current and isolated from the backplane ground, this module ensures reliability and safety in industrial applications.
-
Product
DP Multiplexer Module, 60V 1A, 10 Channels
PK02-001-203
-
The DP Multiplexer Module is a sophisticated 10-channel, 60V, 1A double-pole multiplexer designed for effectively routing multiple Device Under Test (DUT) points to shared instruments or stimulus resources. This module is ideal for reducing instrument count and minimizing in-fixture wiring, ensuring a more efficient testing setup. Built with high-quality instrument-grade ruthenium reed relays, it excels in applications requiring long service life, stable contact resistance, and fast operation, particularly for low-level signals. The multiplexer not only allows seamless switching between the common terminals and up to ten channels but can also be expanded by cascading with adjacent modules. It features options for integration with other modules via the Testblox analog backplane, making it a versatile choice for demanding testing environments.
-
Product
Dual 2P Multiplexer Module, 60V 2A, 10 Channels
PK02-004-203
-
The Dual 10-channel, 60V, 2A two-pole multiplexer (PK02-004) is designed for higher-current in-fixture signal routing, allowing you to efficiently route two independent, high-power signal groups near the DUT. It features electro-mechanical relays with high-quality palladium-ruthenium, gold-covered contacts, ensuring suitability for both low-level and high current (up to 2A) switching. Also, larger multiplexers can be designed by cascading multiple modules, making it versatile for complex setups. The improve response time of less than 3 ms extends its capability while ensuring a compact and easy-to-replicate testing solution.
-
Product
Switching Module, SPST 60V 1A, 8 Channels
PK01-001-202
-
The Switching Module, SPST 60V 1A, 8 Channels is a compact and versatile solution designed for on/off signal control within various fixtures. Sporting eight SPST relay channels rated for up to 60V and 1A, it serves as a cost-effective alternative to custom relay boards, efficiently keeping switching close to the device under test (DUT). Constructed with high-quality instrument-grade ruthenium reed relays manufactured by Pickering Electronics, this module excels in applications requiring long service life, stable contact resistance, and fast operation. Its default normally open state allows for straightforward usage in simple switching configurations, while the option to interconnect relays facilitates more complex operational networks. With a maximum continuous current rating of 1A (both hot and cold switching), this module guarantees reliability and performance well beyond industry standards, ensuring optimal functionality in demanding environments.
-
Product
USB Multiplexer Module, 1:2, 4 Channels
PK02-007-204
-
The USB Multiplexer Module (PK02-007) is a professional-grade, quad 2-channel USB 1:2 switching module specifically designed for routing USB connections within fixtures. It enables seamless automation of Device Under Test (DUT), host, or peripheral selection without the need for external USB hardware. This multiplexer supports voltages up to 60 V and currents up to 1 A, utilizing high-quality instrument-grade ruthenium reed relays from Pickering Electronics. The module is engineered with controlled differential impedance to minimize insertion loss and ensure high-quality signalling. Featuring an operating speed of 250 µs, the device includes drivers for both Windows and Linux, making it versatile for various applications. It also comes backed by a 3-year warranty, providing peace of mind for professionals who require reliability and performance in their testing environments.
-
Product
Module Guides For Direct PCB Connectivity
TB82-001
-
Module guides for direct PCB connectivity help retain Testblox modules in the fixture and enable individual modules to be removed for maintenance and service, making direct board-level integration cleaner and easier.















