Showing results: 16 - 30 of 32 items found.
-
CR10000 -
Manncorp
10 fully controlled upper and lower convection heating zones allow the CR10000 SMT reflow oven to provide you with a thermal accuracy of ±1˚C. Manncorp’s low-velocity, low-turbulence air flow options produce an even ΔT of ±2°C across PCB assemblies out to 22” (570 mm) wide edge-to-edge backed by throughput that can still keep pace with your high-volume production needs.
-
CR4000C -
Manncorp
At just over 6 1/2 feet long, the CR4000C full-convection reflow oven fits production areas where floor space is tight without sacrificing performance. High-mass heating panels and high-speed blowers allow the oven to reach temperatures up to 300˚C for lead-free reflow.
-
CR5000 -
Manncorp
The CR5000 full-convection reflow oven provides consistent, quality performance, low ΔTs across every board, and mid-volume throughput, all in a compact, floor-space-saving footprint. The oven also provides flexibility and easy setup and changeover, thanks to the generously sized pin-edge and mesh belt conveyors, easy to use oven management software, and easy profile setup with the included KIC Auto Focus profile prediction software.
-
CR6000 -
Manncorp
A combination of high-mass heat sources and efficient thermal transfer allows the CR6000 to provide excellent reflow soldering results and throughput with a shorter-than-average heating tunnel. Your 6-zone unit also includes advanced features such as a wide combination pin-over-mesh belt conveyor, partnered pre-loaded KIC Auto Focus profile predictions software, and real-time thermal profiling standard.
-
CR8000 -
Manncorp
A combination of 8 independently controlled full-convection heating zones (16), 2 cooling zones, and low-velocity, low turbulence air flow allows the CR8000 reflow oven to provide you with thermal accuracy of ±1°C and a ΔT of ±2°C across PCB assemblies to 22" (570 mm) wide. This high-performance model takes up less floorspace than comparable alternatives on the market and offers a throughput that can keep pace with even high-volume production requirements.
-
Sherlock-300F -
Manncorp
Many companies, especially smaller electronics manufacturers, put off adding automated optical inspection (AOI) to their process because of the high capital investment, the sharp learning curve, and the need for an experienced operator to program and fine-tune it. Benchtop Sherlock 300F AOI machine was designed to make in-house AOI affordable and manageable for first-article inspection, prototyping, and even full production inspection requirements. It features the same technology and quality build of the batch and inline Sherlock 300 models—plus the same two full days of installation and training at your facility offered with the other models*—in a smaller size, at a lower price point.
-
MC301N -
Manncorp
Match your solder paste manufacturers’ precise specifications for preheat, soak, reflow, and cooling with the MC301N Nitrogen Batch Reflow Oven. By simulating the conditions of an inline reflow system in a benchtop unit, the MC301N is ideal for product development, prototyping, and manufacturability testing. Detailed solder profiles are easily programmed, stored, and downloaded through the MC301N’s exclusive hardware control app and Android operating system. Android architecture also allows users to take advantage of touch screen operation and integrated wireless networking for data transfer. Connection for nitrogen input and integrated flow controller included.
-
Zero-Ion G3 -
Manncorp
For two decades, thousands of electronics assemblers have relied on the Zero-Ion cleanliness testing to verify the cleanliness of post-reflow printed circuit assemblies and bare boards. Over time, as PCB assemblies have become more complex and more densely populated with surface mount components, and as vigorous quality standards such as ISO, TQM and Six Sigma have become commonplace, the ability to meet—and confirm—cleanliness levels has grown in importance. The Zero-Ion ROSE tester has kept pace with customer requirements, and the Zero-Ion G3 is the most advanced Zero-Ion ever designed, capable of testing assemblies reflowed with any solder paste, including no clean—yet its also one of the most affordable cleanliness testers on the market as well, with performance and ease of use second to none.
-
Sherlock-300B -
Manncorp
Compact Sherlock 300B batch PCB inspection (AOI) system provides manufacturers with the benefits of inline AOI—hands-off board handling, automatic good/bad board sorting and minimal operator interaction—in the convenience and flexibility of a standalone AOI station that can be located anywhere in the facility and used to process boards from multiple production lines, including production lines that aren't inline/automated, such as smaller and benchtop lines. With an average cycle time of 10 seconds per board (including transport), Sherlock 300B automated optical inspection (AOI) machine can be used for everything from first article to 100% inspection for increased quality and production yields. (Cycle time measured using a 7.3" x 5.1" (185 x 130 mm) PCB with 253 parts.)
-
MC301 -
Manncorp
Meet precise solder paste specifications for preheat, soak, reflow, and cooling with this easily programmed batch reflow oven. By simulating the conditions of an inline reflow system in a benchtop unit, the MC301 is ideal for product development, prototyping, and manufacturability testing.
-
MC889 -
Manncorp
The MC889 is specially designed for the fast and highly precise loading of large batch sizes. This pick and place machine is equipped with an optical centering, "Vision on the Fly" system that guarantees the best possible measurement of SMD components (such as 0201, SOIC, PLCC, BGA, µBGA, CSP & QFP, as well as odd-shaped components) while completing placement at rates of 20,000 CPH.
-
MX1 -
Manncorp
Manncorp’s new MX1 is a high-performance x-ray inspection system designed for real time imaging of multilayer PCBs and dense metal BGAs, μBGAs, and chip scale packages. Its high voltage (80kV), computer-controlled x-ray tube and 35 μm focal spot provide the power necessary for detection of a variety of defects including bridging, voids, and missing balls. The MX1’s standard camera features continuous zoom magnification from 4X to 50X and variable angle viewing up to 45°, and an upgrade to the x-ray tube can boost magnification to 225X.
-
MC400 -
Manncorp
The MC400 Pick and Place machine places an enormous range of components, quickly and accurately, from 0201s through 100 x 150 mm SMDs, including BGAs, MBGAs, CSPs, µBGAs, MLFs, flip chips, odd form components and ultra-fine-pitch parts down to 15 mil. The system is easy to program and operate and comes standard with universal CAD conversion and teach-in capability.
-
MC1400 -
Manncorp
MC1400 Automatic stencil printer MC1400's automatic dual-vision alignment system ensures accuracy while the printer's linear-guided movements and vertical stencil separation provide high precision and repeatability, a combination that results in ultra-fine-pitch printing capability for component pitches down to 0.3 mm (12 mil). With quick setup and changeover, thanks to the flexible mounting table, MC1400 stencil printer easily keeps pace with medium to high volume production lines and is well-suited to precision batch printing.
-
MC385V2V -
Manncorp
The high-precision MC385V2V Pick and Place system ensures accuracy and repeatablity with high-quality ballscrew drive, linear encoders, and full vision alignment. Programming and operation are made easy with mature, fully supported Windows-based software. Machine holds up to four 32-port feeder racks for a maximum feeder capacity of 128 tapes. Waffle trays and cut strip tape holders can be used in the placement area.
