VECTOR Electronics and Technology, Inc.
We offer the shortest lead-times in the electronics industry with extensive factory-stock selection of 19" rack mount systems packaging and prototyping products. We have a growing number of aerospace, military and commercial OEM accounts in addition to national distribution channels for our Vectorbord® products.
- ( 800 ) 423 5659
( 818 ) 985 8208 - ( 818 ) 985 7708
- inquire@vectorelect.com
- 11115 Vanowen St
North Hollywood, CA 91605
United States of America
-
Product
Circbord
8016
-
VECTOR Electronics and Technology, Inc.
Pad-Per-Hole. Plated-thru holes.0.080” diameter isolated solder pad around each hole on both sides. Unrestricted component placement and extended area for high density applications.
-
Product
Extrusion Rail
1440-0012-84
-
VECTOR Electronics and Technology, Inc.
To accommodate CG3-Type guide rails and attach front panels.10mm short front lip for for use with Type IV, VIIinsertion/extraction type lever handles.HP pitch pattern of holes for precise installation of card guides.M4 threaded at ends.
-
Product
Plugbord
3719-6
-
VECTOR Electronics and Technology, Inc.
72 Gold plated edge contacts (36 each side)on 0.100"(2.54mm) centers. Pad per hole and peripheral buses, same both sides. Row and column legends provided
-
Product
6U Vertical Card
440
-
VECTOR Electronics and Technology, Inc.
Chassis for vertical card installation
-
Product
Circbord
8021
-
VECTOR Electronics and Technology, Inc.
Copper plated-thru holes with solder plating, peripheral ground plane.3U X 160mm Eurocard size will fit into 3U DIN Metric subrack..
-
Product
IBM PC-XT, Vectorbord Plugbord
4613
-
VECTOR Electronics and Technology, Inc.
62 contacts (31 each side) on 0.100" centers. 3-Hole Solder Pads for interconnecting multiple component leads.I/O mounting area for 37-pin D-sub and ribbon cable connectors. Mounting bracket and hardware kit included (P/N HD36B).
-
Product
Vectorbords
-
VECTOR Electronics and Technology, Inc.
General purpose pre-punched insulating punchboard is available in variety of grid patterns shown below for assembling circuit components. Vectorbord® is available in FR4 epoxy glass, FR2 phenolic, CEM-1 epoxy glass composite and FR4 HiTg 170°C materials. Vectorbord® listed below is unplated copper clad on one side, both sides or unclad with no copper layer on either side.
-
Product
Extender
3690-6
-
VECTOR Electronics and Technology, Inc.
Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.
-
Product
Eurocard Plugbord
4614-5
-
VECTOR Electronics and Technology, Inc.
3U x 160mm Eurocard size for 96-pin DIN connector. Pad-Per-Hole both sides Voltage and ground buses around board perimeter on both sides Press-fit dual-pole terminal blocks accepts 14-20 AWG wire. Pushbutton release for each pole. Terminal block leads extend 1/8" below bord.Available in 2-pole to 16-pole
-
Product
Eurocard Plugbord
4616, 160-PIN VME64x
-
VECTOR Electronics and Technology, Inc.
6U x 160mm Eurocard size for 160-pin DIN connectors. 3-Hole Solder Pad Pattern on both sides. 3-Hole Solder Pads (0.28” x 0.080”) for interconnecting multiple component leads.Interleaved buses on both sides, back-to-back. Pad and bus surfaces solder-coated for user convenience. Row and column legends provided.
-
Product
Eurocard Plugbord
E160-6U-1
-
VECTOR Electronics and Technology, Inc.
6U x 160mm Eurocard size for 96-pin DIN connectors. Pad-Per-Hole both sides. Voltage and ground buses around board perimeter on both sides.Pad and bus surfaces solder coated for user convenience. For solder, Wire-Wrap or mixed wiring methods.Row and column legends provided.
-
Product
Extrusion Rail
5250998-84
-
VECTOR Electronics and Technology, Inc.
Fits onto rear face of rear extrusion rails, in between backplaneand extrusion rail to isolate backplane from extrusion.HP pitch pattern of holes for precise installation of backplane.
-
Product
Eurocard Plugbord
E220-6U-3
-
VECTOR Electronics and Technology, Inc.
6U x 220mm Eurocard size for 96-pin DIN connector.Overall ground plane both sides with 0.085" diameter clearance around each hole.. Solder coated for user convenience. Use T123 eyelets to simulate plated-thru holes committedto voltage or ground planes. Row and column legends provided.
-
Product
IBM PC-XT, Vectorbord Plugbord
4613-3
-
VECTOR Electronics and Technology, Inc.
62 contacts (31 each side) on 0.100" centers. Pad per hole. Voltage and ground buses around board perimeter. I/O mounting area for 37-pin D-sub and ribbon cable connectors. Mounting bracket and hardware kit included (P/N HD36B).
-
Product
Extrusion Rail
1404-0018-84
-
VECTOR Electronics and Technology, Inc.
To accommodate guide rails in rear center position when6U subrack is horizontally divided into 3U section.HP pitch pattern of holes for precise installation of card guides.M4 threaded at ends.
