SmartTester
The SMARTTESTER® system is a comprehensive modular system of hardware and software modules for test engineering. All modules can be combined as desired. With one system you have countless possibilities to adapt the mechanical construction as well as the test procedure to your requirements at any time. Components can be easily added to the system at a later date, so that your personal SMARTTESTER® grows with your tasks.
- +49 641 986130
- contact@inotec-ap.de
- Felsweg 12 · 35435
Wettenberg,
Germany
-
Product
Male Extension 20
INO006547
-
Male extension for connecting two components with a bore of 8. Two pull pins (8-23) are included.
-
Product
Base High Frame
INO014372
-
Base frame designed for shelves · Casters with total locking brakes · Side slotted panel for accessories · Height approx. 840 mm · Depth 400 mm · Width approx. 800 mm (with casters).With the SMARTTESTER® accessories, you can supplement your testing system exactly as your workplace requires. Whether frame, additional emergency stop, mounting kit, expansion, or cable – all parts are tailored to the SMARTTESTER® systems. This way you can gradually expand your system – safely and without any makeshift solutions.
-
Product
Torque Sensor SM-DT01-02
INO006807
-
Torque measurement -2 Nm to +2 Nm · 1.5 m cable with plug.With SMARTTESTER® sensors, you can measure forces and torques in your test setup. The strain gauge-based force and torque sensors easily plug into the strain gauge input modules and can be integrated and evaluated in the SMARTTESTER® software. Mechanically, they fit directly into the MECHANICS construction kit and the SMARTTESTER® actuators. This allows you to reliably collect measurement data and document your test results comprehensively.
-
Product
Male Extender 20 - S
INO009021
-
Male extension (S) for connecting two components with a hole of 8. Two downward pull pins (8-23) are included.
-
Product
PU-M6 Clamping Screw
FM-CS01-M6
-
Clamping screw for use with clamping bracket or individually.Includes nut M6 (SW10).With our MECHANICS construction kit, you have your devices, test items and test setups firmly under control. The numerous, easy-to-use components work perfectly with your SMARTTESTER® testing system.
-
Product
Clamping System Round 80-4
FM-CS-RD80-4
-
The Clamping System Round 80-4 offers a clamping range of Ø67 mm. Four interchangeable jaws for clamping inside/outside. Compatible with rotary axes RB. Delivered with two pull-down pins 8-23 for quick installation.
-
Product
Positioning Unit BG2
FM-PU-02
-
Manual positioning unit with a stroke of 0–73 mm and mechanical position indicator (display accuracy 0.1 mm, rotatable by 90°). Free of play, pre-tensioned, and self-locking – load up to 300 N, moments up to 18 Nm. Adaptation to the SMARTTESTER® system with assembly kit FM-AK-02 and slide plate FM-PS-02.
-
Product
Clamping System 15
INO006601
-
The Clamping System 15 offers a clamping range of 15 mm. Hardened jaws with a prism and plastic jaws are included. Mounted on a base plate and with down-pull pins 8-23 for quick installation.
-
Product
Pneumatic Rotary Module RD12-246
INO015204
-
Pneumatic rotary module · Size 12 · 1.25 Nm · 246° rotation angle · with stops / dampers.With the SMARTTESTER® actuators, you bring motion into your test setups - linear or rotary, electric or pneumatic. All drives are directly connected to the suitable technology modules and comfortably controlled via the SMARTTESTER® software. Their mechanical interfaces fit the MECHANICS construction kit, allowing for seamless integration into your fixtures. This enables reproducible execution of testing processes with defined paths, forces, and speeds, and allows for quick modifications as needed.
-
Product
Pre-Assembled Plate 600×352
INO008672
-
Pre-assembled clamping plate 600 × 352 mm consisting of 2 intermediate plates FM-PB-600, 1 connector FM-CB-600 and 2 center connector sets.M6 threads on a 40 mm grid and 8 mm groove – can be used as a single plate or in combination, expandable.Permissible load 650 N per connector.
-
Product
MECHANICS Starter Paket I
INO004841
-
With our MECHANICS construction kit, you have your fixtures, test specimens, and test setups firmly under control. The numerous, easy-to-use components work perfectly with your SMARTTESTER® testing system. Due to the identical connection technology and the same tools, the individual parts fit seamlessly together. This allows you to realize your test scenarios in record time and adapt them super quickly. Basic equipment of MECHANICS for the development of flexible test setups. With connectors, clamping brackets, extensions, angles, pads, and tools.
-
Product
Extension 80
INO003518
-
Extension 80 mm for connecting two components with hole 8 and a pull pin.A pull pin (8-23) and a tension screw (short) are included.
-
Product
Nut 8-M6
INO000129
-
The Nut 8-M6 is designed to be inserted into the Nut 8. It allows for the fastening of components with an M6 screw. It is a smooth nut that can be swivelled.
-
Product
Electric Linear Axis DM-LB46-800
INO006006
-
Spindle axis 46 · 800 mm stroke · Pitch 10 · Feed force 264 N · max. 166 mm/s.With the SMARTTESTER® actuators, you can bring motion to your test setups – linear or rotational, electric or pneumatic. All drives are directly connected to the compatible technology modules and are conveniently controlled via the SMARTTESTER® software. Their mechanical interfaces fit into the MECHANICS modular system, allowing for seamless integration into your devices. This allows you to reliably execute testing processes with defined paths, forces, and speeds, and quickly adjust them when necessary.
-
Product
Nut 8-M4
INO000125
-
The 8-M4 T-nut is inserted into the 8 mm slot.It allows components to be fastened with an M4 screw.
