Smiths Interconnect

Product

Couplers

-

Smiths Interconnect

Smiths Interconnect

Smiths Interconnect range of passive coaxial products include couplers of various types (Wilkinson, Directional and Branchline) designed specifically for established reliability applications to provide optimal performance operating in assigned frequencies ranging from UHF to Ku-Band. The couplers featured below have been developed and qualified to operate in extreme operational environments whilst providing designers and system architects with reliable and robust products produced by a manufacturing team experienced in the production of critical application hardware.

Product

High Power Connectors

-

Smiths Interconnect

Smiths Interconnect

High power connectors are offered in ruggedized, single and multi-way formats with power up to 1,200 Amps that provide excellent performance in harsh environment conditions.

Product

Signal & Power PCB Connector

HPW Series

-

Smiths Interconnect

HPW Series - Smiths Interconnect

Smiths Interconnect's HPW series is a versatile interconnect with mixed signal and power contacts, up to 15A each

Product

Interface Pin

-

Smiths Interconnect

Smiths Interconnect

Smiths Interconnect offers interface probes for all major test equipment manufacturers. We also provide a variety of interface pins for use in test fixtures.

Product

Rugged High speed, VITA Backplane Connector System

KVPX Series

-

Smiths Interconnect

KVPX Series - Smiths Interconnect

Smiths Interconnect's KVPX series is the most rugged VITA compliant backplane connector on the market.

Product

Embedded Transceivers

-

Smiths Interconnect

Smiths Interconnect

Embedded transceivers are chip-sized components based on 850 nm VCSELs and offer bandwidth up to 300 Gbps for short reach applications (<300 m). These transceivers can be soldered or socketed to a printed circuit board and are well suited for small, compact systems requiring high I/O density, low power, and small space. Many of these transceivers have been qualified to operate in harsh environments, such as the ones found in space, and aerospace and defense applications.

Product

Mini Modular, High Density Connector System

H Series

-

Smiths Interconnect

H Series - Smiths Interconnect

The modular design of the Smiths Interconnect H Series allow custom configurations from standard off-the-shelf components without the cost and lead-time of custom tooling. The H Series offer a variety of designs to meet specific customer needs for extreme high density signal, power, and coaxial interconnect solutions.

Product

PCB Connectors

C9394 Series

-

Smiths Interconnect

C9394 Series - Smiths Interconnect

Smiths Interconnect's C9394 series is a high density, line removable module (LRM) connector available in 132 through 594 positions, that can be configured to include fiber optic and coax options.

Product

RF Flexible Cable Assemblies

-

Smiths Interconnect

Smiths Interconnect

Industry leader in manufacturing excellence, tailored performance, and rapid delivery of custom cable assemblies. The Flexible version, our Mini-Flex, has an FEP jacket, round braid and inner spiral shields and is available in 2 diameters, .105" &.165". The Semi-Rigid cables are available with a copper or aluminum jacket and available with a selection of different platings and 4 different diameters (.047", .085", .141" & .250"). The Conformable®, or hand formable (BJ - Braided Jacket), has a tin filled braid with a metal foil underlay and is also available in the same diameters as the Semi-Rigid type . All 3 types (Semi-Rigid, Conformable & Mini-Flex) are manufactured using the same type dielectric core and have virtually the same electrical performance. The decision of which cable to use should be primarily based upon your application.

Product

Fiber Optic Terminus

ARINC 801

-

Smiths Interconnect

ARINC 801 - Smiths Interconnect

The ARINC 801 fiber optic terminus is the next generation of high density, butt joint interconnect technology. With its standard 1.25 mm ferrule and sleeve, the ARINC 801 terminus is designed for both multimode and single-mode applications. For the pull-proof design, the cable jacket is crimped on an external body and a floating mechanism avoids any loss of performance when pulling on the cable. This feature allows for the use of the connector without a backshell. Standard connector formats include MIL-DTL-38999 type, MIL-DTL-83527 type, ARINC 600 and ARINC 781.

Product

High density PCB connectors

MHD/MDD/MDP Series

-

Smiths Interconnect

MHD/MDD/MDP Series - Smiths Interconnect

Smiths Interconnect's MHD/MDD/MDP series is an ESA qualified, high density board to board and board to wire interconnect available in up to 400 positions, with available insulators to accommodate coax and power contacts.

Product

DC TO 40 GHz

MDHC Series

-

Smiths Interconnect

MDHC Series - Smiths Interconnect

Smiths Interconnect's spring loaded High Frequency Micro-D Coax Connectors MDHC offer low VSWR of 1.5:1 (typical) up to 40GHz (max mated pair), maximum overall diameter of 0.125" fitted into low-profile micro-D housing, constant 50 Ohm airline impedance.

Product

Environmentally-sealed plastic connector

REP Series

-

Smiths Interconnect

REP Series - Smiths Interconnect

Smiths Interconnect’s REP series is easy to use for quick mating.  The REP panel and cable connectors are a highly cost-effective interconnect system, which solves the constant need for simple and reliable connector solutions in rail applications.

Product

Waveguide Loads

-

Smiths Interconnect

Smiths Interconnect

Smiths Interconnect offeres high power Waveguide loads that can with stand up 200Watts at 18 GHz

Product

RF Semi-Rigid Cable Assemblies

-

Smiths Interconnect

Smiths Interconnect

The Semi-Rigid cables are available with a copper or aluminum jacket and available with a selection of different platings and 4 different diameters (.047", .085", .141" & .250"). The Conformable®, or Hand-Formable (BJ - Braided Jacket), has a tin filled braid with a metal foil underlay and is also available in the same diameters as the Semi-Rigid type . The Flexible version, our Mini-Flex, has an FEP jacket, round braid and inner spiral shields and is available in 2 diameters, .105" &.165". All 3 types (Semi-Rigid, Conformable & Mini-Flex) are manufactured using the same type dielectric core and have virtually the same electrical performance. The decision of which cable to use should be primarily based upon your application.