Sponsor Your Catalog
  • 81140A High-Speed Serial Pulse Data Generators, 7 and 13 GHz A high-quality-stimulus is crucial to the validation and characterization of today?s high-speed transmission systems. The new 81141A 7 and 13 GHz serial Pulse Data Generators provide what is needed to conduct physical layer tests e.g. precision low jitter signals or full control of data streams for stress tests
    Keysight Technologies
  • 812-OP/F - Serial Digital (SDI) Test Signal Generator The SPG-812 (OP/F) digital test set module is one of the newest modules to be developed in the Genflex family. The SPG-812 (OP/F) digital test set module allows the user to select from sixteen different digital video test patterns by a front panel switch or through a remote control unit the 812TRC.
    Link Electronics
  • 81140A - High-Speed Serial Pulse Data Generators The new 81141A 7 and 13 GHz serial Pulse Data Generators provide what is needed to conduct physical layer tests e.g. precision low jitter signals or full control of data streams for stress tests
    Keysight Technologies
  • E4859A - Agilent E4859A Serial Cell Generator and Analyzer System Datasheet of the Agilent E4859A Seriell Cell Generator & Analyzer System
    Keysight Technologies
  • Reflectometer T-510 - Time Domain Reflectometer Pulse Echo, Impulse Current & ARC Reflection Method. 10 Arc graphs + 1 reference graph for accurate & certain fault distance. Five waveforms for comparison. Easy to use Cursor. Large graphs storage capacity. Online support for experts reviews the fault graphs. Compact small, light weight design. Suitable to operate on mains (220-230/240 VAC, 45Hz up to 60 Hz) or portable generator. eflectometer T510 is a Laptop based Digital Time Domain Reflectometer for pre-location of faults in power Cables. Its state-of-art technology makes it easy to use and yet most reliable for any fault condition. The interactive graphical user interface makes it easy, for even a layman, to pre-locate the fault distance. Serial Port makes the device extremely flexible. The device has two working modes namely IMPULSE MODE and PULSE ECHO MODE. Pulse echo mode is useful only for open and shot types of faults. The impulse mode when used with surge generator T-1005, T-1016, T-1020 & T-1032 to pre-locate fault distance of almost all types of faults including open, short and intermittent faults by way of ICM Method. The software provides a huge storage capacity so that you may use the Reflectometer T-510 test result for future reviews & analysis. The innovative feature of software displays LAST TWO waveforms for comparison purposes. The easy to use cursor makes it simple to pre-locate the fault distance. The VOP (Velocity of Propagation) control makes it easy to precisely pre-locate the fault distance on cables with different velocity of propagation. The test waveforms can be printed as a hardcopy directly from the software. The fault readings can be transferred over INTERNET for further assistance. The software is so programmed that it automatically saves all the test results, so that you never miss any important result. All the files are stored on the bases of date and time of the reading taken.
    Techno Instrumentation
  • SDA601 - Handheld Generator Teamed with the TSG601 Serial Component Generator, the SDA601 Serial Digital Analyzer completes a comprehensive test set for serial component television system installation and maintenance.
  • TSG601 - Handheld Generator The TSG601 Serial Component Generator and the SDA601 Serial Digital Analyzer form a comprehensive test set for serial component television system installation and maintenance. 
  • CS700A - Signal Generator Signal Generator (0-10MHz, Sine, Square, Triangle) for serial numbers above 4000
    Cleverscope Ltd
  • PacketMaker™ II - SAS/SATA Traffic Generator PacketMaker™ is a flexible traffic generation product for high-speed serial storage buses. This bus exerciser is a great tool for developers of devices and controllers. PacketMaker was specifically designed for the unique requirements of high-speed serial bus protocols like Serial ATA and Serial Attached SCSI, and is the first such product for these protocols.
  • CS700 - Signal Generator Signal Generator (0-10MHz, Sine, Square, Triangle) - for serial numbers below 4000. 
    Cleverscope Ltd
  • J7000 - Jitter Noise Generator The J7000A Series instruments high crest factor output is used as a random jitter source for serial data bus applications, including PCI Express Gen I & II, Serial ATA, and Fiber Channel. The noise source is designed for the PCI-SIG total jitter (Tj) model serial data application, but can be used for any random jitter noise application.
  • SeBERT-400B - 40Gb/s-Serial or 4x10Gb/s-Parallel BER Tester SeBERT-400B is a serial bit error rate (BER) tester for 40 Gb/s serial NRZ signal or 10Gb/s 4 channel parallel NRZ signals. It consists of four 10Gb/s pulse pattern generator (PPG), four 10Gb/s error detectors (ED), a 4-1 multiplexer (MUX), a 1-4 demultiplexer(DEMUX), a frequency synthesizer and a frequency multiplier/divider circuit block.
    Alnair Laboratories
  • Saniffer RapidIO - Protocol Analyzer Sanifferr’ s RapidIO architecture incorporates its protocol analyzer and traffic generator into the same hardware, making it an elegant and complete solution for debugging devices within a Serial RapidIO environment.
  • HIVG - SGSC - Impulse Voltage Generator Himalayal HIVG - SGSC serial impulse voltage generator can used to generator impulse volage simulating lightning strokes and switching surges. The system is designed under the standard of IEC, ANSI / IEEE.
    Shanghai Himalayal
  • K-270/K-270M - Programmable Video Signal Generator K-270 is Video Signal Generator for high resolution LCD, PDP Module as supporting LVDS, TMDS mode that is Serial transfer mode.
  • ATC-SCC04 - Quad Serial I/O Industry Pack The ATC-SCC04 module is a quad channel serial communication controller. The ATC-SCC04 module is based on two enhanced Z85230, with larger FIFOs and several SDLC improvements from Zilog. This module provides four asynchronous ports up to 115 kbaud and synchronous ports up to 2 Mbaud full-duplex channels, with an independent baud rate generator for each channel.
    ALPHI Technology
  • IPM-MULTI - 16-Port Multi-Protocol Ipack Module The IPM-MULTI helps to reduce cost and space by minimizing the number of avionics serial I/O boards in your system. The IPM-MULTI supports up to 8 transmit channels, 8 receive channels and provides 8 general purpose discrete I/O lines (DIO). The channels can be configured as ARINC, Serial ASYNC, HDLC/SDLC and Frequency/Pulse signal generator.
    MAX Technologies
  • 3013 - SWR True Antenna Analyzer SWR True Antenna Analyzer is a versatile analyzer covering all major communication bands from 30MHz to 2700MHz. The SWR True will analyze antennas and cables. Measurements are represented graphically as VSWR or Return Loss plots. The built in PLL synthesized generator offers a superior accuracy with small step size. The internal operating system controls measurement, display and the I/Os allowing serial communication to PC, USB to memory stick and USB Serial communication
  • OxSync - HDTV Universal Sync and Test Generator The HDTV Universal Sync is a cost effective High Definition Test Generator, providing a variety of high quality HDTV analogue and serial digital test patterns in the common HDTV video standards.
    Oxygen DCT
  • NI Camera File Generator Automatically generates or updates camera files for Camera Link and parallel digital cameras Interactive utility for interfacing digital camera with NI image acquisition hardware Includes serial communication commands and menus Integrates precise camera timing and control signals
    National Instruments
  • HMG - Induced Over Voltage Test System Power Range: 50kW - 3000kW Himalayal HMG serial motor generator is used for the high voltage test system project induced over voltage test. Its wide range supply strength support to Himalayal high voltage laboratory construction.
    Shanghai Himalayal
  • TG700 - Multiformat Video Generator The TG700 is a multiformat, analog and digital, precision signal generation platform. Designed with the changing needs of the video industry in mind, the TG700 offers sync pulse generation and test signal generation for a wide array of analog, serial digital, and digital high definition formats. 
  • 6041R-8 - Video Data Encoder Video Data Encoder, Model 6041R-8, is a programmable video insertion generator which inserts a variety of man and machine readable annotation and graphics into existing RS170 or NTSC video signal. Additionally the unit includes a video sync generator, which produces an RS-170A (NTSC) composite signal with black burst, which is synchronized, to the IRIG B serial time signal. This signal is used to synchronize video cameras that are connected to the 6041R-8. All cameras genlocked to like units operating on a common serial time signal will be precisely synchronized. A handheld terminal is included which is used for local setup and user display configuration.
    Instrumentation Technology
  • SeBERT-100 - 10Gbps Serial Bit Error Rate Tester SeBERT-100 is an integrated Pseudo-random Bit Sequence (PRBS) generator and Bit Error Detector with internal clock recovery circuit. Bit rates from 9.95 ~ 11.32 Gb/s. PRBS 27-1, 223-1, 231-1, and 64bit definable.
    Alnair Laboratories

Results 1 - 24 of 62

Serial - A bus that can be used with almost any device transmitting a single stream of data.