Relays

The LX Series of general purpose switching systems are discrete relay switch modules switching any level from micro volts and nano amps to 1200 Volts or 10 Amps. Allows up to 16 modules with 8 relays per module to be configured in a 3.5" rack mount or bench-top chassis. LED displays provide a positive indication of switch point status. A ...more

CYTEC's new 4600 Series are economical, high density, passive, bidirectional switch matrices. Single chassis system has -3dB bandpass of 30 MHZ. Each chassis holds up to 2048 two pole 2 GHz Type A relays, and a modular design allows great flexibility in creating different switching topologies. For example, the following single chassis configur ...more

GLs new USB based T1 E1 Analyzer is the world's most powerful, full featured, and complete BERT, voiceband, data, signaling, and protocol analyzer on the market. It can perform analysis and emulation of various signal types including voice, digits, and tones; various protocols including HDLC, ISDN, SS7, CAS, Frame Relay, GSM, GPRS, CDMA, and U ...more

High Density Reed Relay Switching Matrix. The PX/512 Series of switching matrices are compact and economically priced systems using high reliability Reed Relay Modules assembled into pre-wired Mainframes or Expansion Chassis to form up to a 32x16 or 64x8, single or two pole matrix in a 3.5" height chassis. ...more

The V450 is a VME 16-channel isolated analog-to-digital converter module which can acquire a wide range of DC voltages, including thermocouple temperatures. Each channel is independent with an isolated DC power supply, optoisolated interface, A/D converter, signal conditioning, input protection circuits, and test relay. An internal microproces ...more

The 40-612 Very High Density Versatile Multiplexer module features a wide range of software selectable switching configurations. It is especially useful where a number of high density multiplexers are required with the option of easily altering the channel count as a test system evolves. Typical applications include signal routing in ATE and d ...more

The 40-569 PXI Matrix BRIC provides a range of high density bus matrix inputs and resource distributor bussed configurations capable of switching up to 2A and up to 250V AC/220V DC. The 40-569 BRIC modules are available in 4 or 8 slot PXI sizes and are constructed using high quality electromechanical relays. Typical applications include signal ...more

The 40-830 is a 75Ω RF Switch available with 3 or 6 separate SPDT relays in a single PXI slot. Both versions have been designed to exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. The switch banks have been carefully designed to ensure excellent and repeatable RF characteristics to f ...more

GPIB Data Acquisition and Control Board with 4 Analog Outputs, 6 Analog Inputs, 32 Digital I/O, 6 Relay Drivers, and 4 Thermocouple Inputs ...more

A IEEE 488.2/GPIB/HP-IB to Relay Interface that provides 16form A contacts or 16 relay drivers for switching signals or for driving external relays. GPIB Controlled relays andisolated digital inputs. Multiple configurations: 16 low-level SPST relays, 16 hi-power SPST relays or 16 relay drivers. The 4864s versatile commands let t ...more

The Model 4867 GPIB Data Acquisition and Control Module provides analog and digital signals for controlling virtually any kind of a device and the capability to read back analog voltages, digital signals andtemperatures. ...more

Serial Data Acquisition and Control Board. Provides Analog I/O, Digital I/O, Relay Driver Outputs and Temperature Measurements. RS-232, RS-422 and RS-485 Serial I/O includes network address and network packet modes. ...more

Serial Data Acquisition and Control Minibox. Provides Analog I/O, Digital I/O, Relay Driver Outputs and Temperature Measurements. RS-232 and RS-485 Serial interface provides GPIB functionality over a serial link. ...more

Serial to Parallel Digital Interface box. RS-232 or RS-485 serial input. Provides 8 Isolated Digital Inputs with choice of:16 Low Level Form 'A' Relaysor 16 Heavy Duty Form 'A' Relaysor 16 200 mA Relay Drivers ...more

A range of ultra high density 3U matrix module brics available in 4 or 8 slot PXI sizes using high reliability Pickering Ruthenium Reed Relays. Bric family of switching capability is available in 4416 or 2880 crosspoints up to 10 Watts, 2212 crosspoints up to 20 Watts and 1600 crosspoints up to 60 Watts. This high level of switching density al ...more

The 40-410 range of Digital I/O Modules are suitable for operating external devices, such as heavy duty relays (power,RF and high voltage types),solenoids,lamps etc.,or for interfacing with external logic,e.g.a programmable instrument with a BCD interface. Two choices of output drive are available:TTL for interacting with external logic and Op ...more

This MicroLog sensor monitors Reed Relay contacts and switch status (open/closed), to identify the correlation between phenomena such as temperature change and door status. ...more

The JX Series of Matrix/Multiplexers provides a cost effective solution for large 1xN Multiplexers, 2xN Matrices, discreet switch points, or combinations of these. 5.25" high, standard 19" rack mount chassis accepts up to 16 switch modules which slide into card guides from the rear for ease of configuration and maintenance. Modular s ...more

The P580 is a double width 3U PXI module that functions as a multiplexer. The P580 incorporates two independent differential analog paths that can be connected to any of 34 differential signal paths through the 68-position front panel mounted SCSI connector. Also, each path can be routed to any of the four SMB front panel mounted connectors.Sw ...more

GL's Frame Relay Protocol Analyzer can be used to analyze and decode frames conforming to Q.921, Q.922, LAPF, Frame Relay Forum standard -FRF.9 and FRF.12, Multiple Protocol Encapsulation, LCP RFC1661, Q.933 SVC and LMI SNAP, PPP, IP, SMTP, POP3 and so on. ...more

Provides 16 independent latching DPST switches configured as a 4x4 matrix. These two wire switches have maskable interrupts that occur when the requested relay movements have been made. The module also has a FIFO for storing up to eight relay operations. This module is useful when instrument matrix switching is needed in your system. This unit als ...more

The PX413S provides 16 independent latching DPST switches configured as a dual 8x1 multiplexers or a single 16x1 multiplexer. These two wire switches have maskable interrupts that occur when the requested relay movements have been made. The module also has a FIFO for storing up to eight relay operations. This module is useful when instrument multip ...more

The VX Series of low-cost, versitile switching systems use a modular concept of switch modules, display modules and control modules which can be assembled into VX/256 Mainframes as matrices, multiplexers, or individual relays. ...more

Features: 48 mini-power relays, may be controlled individually. Relay can be set to ON, OFF, ON-OFF-ON and OFF-ON-OFF modes ...more

The Model 7116-MWS is a fully assembled 16-Channel RF/Microwave Switch System designed to simplify controlling high frequency switching. It employs the IEEE-488-compatible Model 7001 Switch Mainframe as a switch controller as well as electromechanical coaxial relays with a bandwidth from DC to 18GHz. ...more