Regulated Power Supplies

The model 1790 is a cost effective, high power, regulated DC power supply with 640 Watt output (0 to 32V, 0 to 20A). It is a linear high current DC power supply suitable for bench operation or standard 19" rack operation. This linear power supply is a high power workhorse that will easily deliver clean power to your high current circuits. ...more

AC DC SWITCHES. Switching wallmount power supply. CE Mark EMC & LVD. Fully regulated output. Overload and short circuit protection . Blue Angel compliance. High efficiency. ...more

The EA system regulated AC power supplies consist of a 2kVA output master unit having a control function and a built-in frequency synthesizer, and a power booster (2kVA capacity ) which serves to amplify the output. In addition of stabilizing the output voltage and improving the distorted waveform, it is also possible to change frequency and v ...more

C&D Technologies has AC/DC power supplies to meet every possible application requirement in terms of power, performance, efficiency, protection, size, approvals compliance and cooling requirements. Fully Isolated and Regulated Outputs Active Power Factor Correction to EN61000-3-2 FCC/VDE Class B EMI Filter 1-5 Output Models Compact Size Option ...more

Model LS1330 is a quad display, triple output regulated DC Power Supply that provides one fixed output (5V/ 3A) and two variable outputs (0 ? 30V/ 0 ? 3A). The variable outputs can work independently, in series tracking, or parallel mode. ...more

The SEL-LPS is a general-purpose dc supply with two 24 Vdc and two 125 Vdc unregulated sources that can be combined to produce 24, 48, 125, or 250 Vdc at 50 VA. Low voltage outputs supply +5 Vdc (500 mA), +15 Vdc (250 mA), and -15 Vdc (250 mA) of regulated power.  ...more

Power Supplies of High Voltage up to 2kV @ 0.5A and high current up to 100 A @ 10 V are available. Above 100 W power supplies have triac based pre regulator. Switching frequency above 100 KHz for SMPS.  ...more

Behlman's P1350-CE AC Power Supply / Frequency Converter / Inverter, delivers 1350VA of clean, regulated AC power in a 5.25" high bench top unit, that easily converts to rack mount, for far less cost than competitive models.  ...more

The ORTEC Models 556 and 556H High-Voltage Power Supplies provide the noise-free, well-regulated, very stable high voltage necessary for proper operation of photomultipliers, ionization chambers, semiconductor detectors, electron multipliers, and many other devices.  ...more

Behlman's P1350 AC Power Supply / Frequency Converter / Inverter, delivers 1350VA of clean, regulated AC power in a 3.5" high bench top unit, that easily converts to rack mount, for far less cost than competitive models. The Power Passport can simulate any world wide utility as well as aircraft and shipboard power. Simply select the requi ...more

TDI - Advanced Conversion Products manufactures special converters for a broad line of industrial applications. Our TR Series converters are used on various industrial and transit applications including locomotive cabs and used at trackside applications. They provide critical power for industrial signal radio transceivers, control and safety syst ...more

Behlman's  P1351 AC Power Supply / Frequency Converter / Inverter delivers 1350 VA of clean, regulated AC power in a 3.5" high bench top unit, that easily converts to rack mount, for far less cost than competitive models. ...more

SEC 11 8-11 Amp Power Supply 8-11 Amp regulated DC power supply.Industry proven reliability and performance. Suitable for general purpose applications. ...more

MAGNAVOLT's "FAILSAFE" electronically regulated, thyristor controlled DC power supplies of the series DTLG and DTWG are air- or water cooled and highly reliable. The power supplies can be operated manually on the front panel or remotely (optional) via Analog Programming or computer interface. ...more

Spellman?s XLG Series of X-ray generators are well regulated high voltage power supplies with output voltages to 130kV and very low ripple achieved through the use of advanced resonant conversion techniques. Extremely stable voltage and emission current outputs result in significant performance improvements over previously available ...more

The PS Series power supplies are DC constant-voltage (CV) À i  constant-current (CC) power supplies based on the variable switching method A î featuring compact size À î light weight À î excellent reliability and the variable outputs. They have been designed as highly universal stand-alone type models putting emphasis on the ease of operation a ...more

The CSG110 Signal Conditioner Amplifier featured with Din Rail Mount is FUTEK?s solution for in-line amplifier of any full bridge strain gauge type sensor with mV/V range output to provide VDC and/or 4-20mA signal with built-in regulated bridge excitation source. The Strain Gage Amplifier has a plastic housing with mating DB9 female connector f ...more

Spellman?s Bertan brand of 605C modular high voltage power supplies offer well regulated, fixed polarity outputs up to 20kV, which operate off a +28Vdc input (+24Vdc optional). These fully enclosed modules are designed for bench top or OEM applications like spectrometers, detectors, imaging and electron beam usage. ...more

The WK Series is a 500 watt regulated DC power supply offering output voltage ranges to 125kV and an interesting "plus." Maximum current ratings are equivalent to a 600W supply up to 84% of rated voltage! Panel height is only 5.25 inches and weight is less than 30 pounds.  ...more

Calex Mfg. Co., Inc. of Concord California announces the Model 22-100 Linear Power Supply. The 22-100 provides a tightly regulated ±15 Volt output providing ±100mA of output current. The output noise for the 22-100 is low, 2mV RMS, making the unit ideal for powering sensitive analog circuitry. ...more

The MP Series has been designed as high performance dc to dc converters with output voltages up to 40kV. Each module provides well regulated, low ripple and high stability high voltage in a highly versatile compact design, combining linear and switched mode techniques to minimize internal dissipation and generated EMI/RFI interfe ...more

The 5250 is an open frame, current-regulated power supply that is designed for use with Magtrol's Hysteresis Brakes and Clutches. With regulated current, torque drift caused by temperature changes within the brake coil is eliminated. The 5250 is a solid-state control that provides smooth application of current from zero to maximum. Braking con ...more

The LK family of power supplies are sophisticated, 3 kW, high voltage power supplies with low ripple and noise. They are air insulated, fast response units, with tight regulation. They are designed to meet the growing demands from both users and electric utilities for switching supplies with excellent input power factors that draw harmonic cur ...more

The LX Series are 1000 watt regulated high voltage DC power supplies with an important difference ... maximum current ratings are equivalent to a 2000W supply! This maximum current, which is available for all output voltages up to 50% of rated voltage, should be of significant interest for many applications ...more

The PG Series is available in two configurations ... as a standard PG Series supply or as an ultra-low ripple PG-LR Series for demanding applications, such as particle accelerators. Shown is the dual-stack PG-LR Series with remote control unit. One stack serves as a high voltage multiplier while the second stack provides an additional low-pass ...more