Hipot

Cable and harness tester, with its' user-friendly interface and large clear display, carries on the Cirris tradition of easy-to-use, low-cost, portable hipot testers. The large display, coupled with a sensible and easy-to-understand button interface, makes the setup and testing of cables quick and intuitive. Test Points: 128-1024, Hipot Range: ...more

The Hybrid 2000 Analyzer is a complete dielectric testing solution with AC Hipot, DC Hipot, Insulation Resistance and DC Resistance testing capability. The Hybrid 2000 combines these four test modes with eight HV scan channels for fast multi-point testing. The Hybrid 2000 has Open/Short Circuit detection for establishing proper device connecti ...more

The Guardian 6100 Plus Electrical Safety Analyzer performs AC and DC hipot (hypot), insulation resistance, ground bond and leakage current measurements for a complete electrical safety testing solution. The built-in leakage current scanner provides up to 20A input current capability for functional run testing, and, in addition, the connections ...more

Testing Capability: Using the CaptivATE software and a QuadTech 6100 Plus Series Analyzer, possible test functions include AC or DC Hipot, insulation resistance, ground bond, earth leakage, patient leakage, patient auxiliary leakage or enclosure current leakage, as well as a functional run test. Automatic Loading Test Setup: The test setup can ...more

AC Hipot Test Performs AC dielectric testing (hipot) over the voltage range from 50 to 5000VAC RMS. Leakage current detection is programmable from 1µA to 40mA, making the 6100 ideal for testing medical products and instruments having a wide range of leakage currents. DC Hipot Test DC dielectric testing is possible from 50 to 6000VDC with leaka ...more

For testing cables, harnesses and other multi-point products and components. Products requiring AC/DC Hipot testing and high insulation resistance measurements. For stand alone measurements or integration into an automated system. Capable of providing highly customized testing programs. Eight models to choose from to fit your test requirements ...more

The fully programmable Model 1740 facilitates high speed, production line testing in both automated and manual applications. Standard tests include AC Hipot, DC Hipot, Resistance, patented Tang-Weld Resistance and Surge. Robust software offers automatic setup of all test parameters, complete result storage, Go/No-Go testing requiring no operat ...more

Our HT10kVac standard laboratory tester has AC output, for regular insulation work. Leakage current limits can be set with the rear panel knob from 0.5mA to 10mAac. Normal operation stops testing when a leakage current greater than the set amount or whenHT5000 Enclosure a dielectric breakdown is encountered. If desired, testing can be set to c ...more

The HT-2000 is a production line AC Hipot Tester. AC Hipot testing is best for: Portable Lamps. Fixtures. Medical Equipment in the Patient Care area. Products not using Y capacitors. Other applications where AC Hipot Testing is mandated. It can generate up to 2000V at 20mA.This tester performs the dielectric withstand and ground continuity pro ...more

The HT-3000 is a production line AC/DC Hipot Tester. This tester can test to UL, CSA and other safety agency production line requirements with either AC or DC voltage .In addition, it allows connection of a high voltage cable (supplied with the HT-3000) for special testing. See details on our Option HO page. ...more

The HT-2800 is a production line DC Hipot Tester. DC Hipot testing is best for: Computers. Telephone Central Station Equipment. Longer or spooled cables and wires. Products using Y capacitors for RFI supression. Manufactured Homes, Modular Homes and Motorcoaches. It can generate up to 2800V at 5mA.. This tester performs the dielectric withstan ...more

Our HT1000AC-300mA is an AC only tester, with the ability to deliver up to 300mA to the EUT. Leakage current limits can be set with the front panel knob from 15mA to 300mA. Normal operation stops testing when a leakage current greater than the set amount or when a dielectric breakdown is encountered. If desired, testing can be set to continue ...more

Our HT1000DC is a DC only tester, with the ability to deliver up to 5mA to the EUT. Leakage current limits can be set with the rear panel knob from 0.25mA to 5mA. The tester stops testing when a leakage current greater than the set amount or when a dielectric breakdown is encountered. When testing stops due to a failure, the output voltage ret ...more

The HTT-1 was designed to provide a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Continuity Testers between calibration cycles. It allows the operator to check the result of the three failure modes encountered in production hipot and ground circuit testing (open ground, high leakage current, ...more

The 2550 provides both AC Hipot and DC Hipot testing in a single instrument. It features a 5 KV, 10 mA AC Hipot test and a 5 KV 3 mA DC Hipot test. With its advanced features and product reliability it is well suited for quick and easy Electrical Safety testing. ...more

The 1340 is a 2.5 KV, 40 mA AC Hipot tester designed for production line AC Hipot testing. With enough output for high capacity applications, the 1340 is ideal for hipot testing of manufactured and modular homes. With its advanced features and product reliability it is also well suited for quick and easy production line testing. ...more

The HP series AC/DC HI–POTS are accurate & durable instruments designed to perform HI-POT tests on all types of electrical products and components in a cost effective manner. ...more

D C DIELECTRIC STRENGTH TESTERS ( HIPOTS ). One voltmeter 0-2500V dc accuracy: 2% of full scale. 4 Lights (power-on, high-voltage-on, fault and line-fault) ...more

High voltage testing up to 1500 V. Automated Slip-Rings testing. This one-of-a-kind tester enables automated bi-directional continuity testing of slip-rings while in motion. ...more

Testwave LLC has been selling, renting and servicing Hipot Products for over eight years. ...more

Portable combination TDR, Thumper Hipot sectionalizer. Choose 16kV/8kV or 25kV / 12.5kV or 28kV/14kV. Automatically marks end of cable and fault location and gives distance. ...more

Hipot Tester. In all cases, both high and low limits are operator programmable for quick, and easy pass/fail testing. These dual limits are essential to ensure that the device under test is actually making contact with the tester. For consistent testing, up to 50 setups can be stored in instrument memory for later recall. An optional high volt ...more

The Guardian 1030 AC/DC/IR Hipot Tester has all the features of the Guardian 1010 with the addition of DC hipot and IR measurement capabilities. The test voltage can be programmed in the range from 50VDC to 6kVDC with a resolution of 1V. The maximum total current is 10mA. The IR measurement range is from 0.1M to 50G with test voltages from 50 ...more

A C DIELECTRIC STRENGTH TESTERS ( HIPOTS ). ...more

The Sentry 10 Plus AC Hipot Tester (CE Mark) performs AC dielectric withstand (hipot) tests. The test voltage is programmable from 50V to 5kV AC with a resolution of 1V. The current range is 1µA to 20mA. ...more