GPIB Switch

A IEEE 488.2/GPIB/HP-IB to Relay Interface that provides 16form A contacts or 16 relay drivers for switching signals or for driving external relays. GPIB Controlled relays andisolated digital inputs. Multiple configurations: 16 low-level SPST relays, 16 hi-power SPST relays or 16 relay drivers. The 4864s versatile commands let t ...more

The Model 4842 GPIB Bus Switch is a GPIBcontrolled switch that enables several GPIBControllers to share one or more GPIBdevice(s) or lets a single GPIB Controlleroperate multiple Bus systems. The 4842 isbasically a GPIB controlled A-B-C switch forthe GPIB bus. When used as a Bus Switch, the4842 lets a GPIB controller connected to thecommon por ...more

Model 4823B GPIB to Parallel Digital Interface Board provides 56 parallel I/O signals with same pinouts as ICS's older 4823A card. On-card header connects to ICS's GPIB Connector/Address Switch Assemblies. Download the 4323B data sheet as a PDF file. ...more

34970A, 3-slot mainframe with built-in 6.5 digit multimeter provides flexibility with a choice of 8 switch & control, plug-in modules. Built-in GPIB and RS-232 interfaces make connection easy.  ...more

Impedance: 50 ohm ; Control: GPIB ; Attenuation Range 0 to 85 dB ; Frequency Range 0 to 3000 MHz ; Average Input Power 1 Watt ; Switching Speed 6 ms . ...more

The Agilent 11713B attenuator/switch driver provides remote or front-panel drive control for 2 programmable attenuators and 2 SPDT switches. The Agilent 11713B can also be used to independently control up to 10 switches. Designed with both benchtop and ATE environments in mind, this flexible, stand-alone driver provides an intuitive user interface, ...more

The Symtx Microwave Switch Matrix Platform is configurable for frequencies from DC to 50 GHz, and is available in coaxial and wave-guide formats. Applications for this Microwave Switch Matrix Platform include microwave test systems for satellite and ground station testing, wireless, broadband and cellular applications, medical and industrial produc ...more

1 Hz resolution with DDS phase-continuous switching. Fully programmable, BCD or GPIB. Modular flexibility, remote-only versions. Low power consumption, high reliability ...more

World's Epoch-making Instruments which can measure p-p Ripple Noise, p-p Noise of Switching Power Supply by digital Measurement. (up to 100MHz). With RM-103, you can measure not only Ripple & Noise but Ripple component itself as you can see below by just filter selection. Measured date is digital so it can be readout via GPIB. If used with our chan ...more

1 Hz resolution with DDS phase-continuous switching. Fully programmable, BCD or GPIB. Modular flexibility, remote-only versions. Low power consumption, high reliability ...more

Impedance: 50 ohm ; Control: GPIB ; Attenuation Range 0 to 127 dB ; Frequency Range 0 to 1000 MHz ; Average Input Power 1 Watt ; Switching Speed 6 ms . ...more

The DCVF-5 Automated Preselector Filter is designed for quick, accurate and repeatable measurements of key CATV system network performance specifications. Based on the popular VF-5 Manual Preselector, the DCVF-5 offers automation capabilities of switching signal paths through the T7 - T13 fixed filters and tuning the 55 - 880 MHz variable filt ...more

The JDSU SB, SC, and SCG series of Benchtop/Rackmount Programmable Switches can be controlled using the front panel keys and a numeric pad or via GPIB and serial RS-232 interface. The SCG series ganged input switches allow a single switch instrument to replace multiple switch elements while maintaining low loss.  ...more

Two fully independent channels, each covering 1-620 MHz. +3 to +13 dBm output. Fully programmable, BCD or GPIB. DDS standard with phase-continuous switching. Low power consumption, high reliability  ...more

Using the new USB controller USB-M 48, the user is now able to control relays (up to 500mA primary current) directly from the PC by means of the standard USB interface. The relays can be controlled without additional drivers, i.e. the USB controller?s outputs are working as relay drivers and no additional drivers, such as GPIB etc., have to be ...more

Designed for parallel switching of RS-232 data or other similar types of data, the S6025DE delivers compact solid-state switching in an expandable configuration. The unit can start as a smaller size and be expanded later to a full 60x60 array with 25 levels, perfect for switching RS-232 type data. It provides a choice or a combination of remot ...more

The DSM-12 is a dual 6-input binary relay tree matrix with a bandwidth of over 4GHz. This unit is intended to extend the input capability of Wavecrest products. The matrix can be controlled manually from the front panel or remotely via the included RS-232C port at the back of the DTS. Remote control of the DSM-12 via GPIB commands to the DTS mak ...more

Two fully independent channels, each covering 0.1-310 MHz. DDS standard with phase-continuous switching. Fully programmable, BCD or GPIB. Low power consumption, high reliability   ...more

1 Hz resolution with DDS phase-continuous switching. Fully programmable, BCD or GPIB. Modular flexibility, remote-only versions. Low power consumption, high reliability ...more

7 decades of DDS resolution available (with phase-continuous switching). Modular flexibility, remote-only versions. Very low phase noise. Fully programmable, BCD or GPIB ...more

PW-600E is a Universal Switching Power Supply Test System which is Cost Down and High Speed Testing type. PW-600E would provide less expensive ,fast Speed .Thanks to USB control, Much faster testing time can be provided than any other GPIB Systems. ...more

7 decades of DDS resolution available (with phase-continuous switching). Modular flexibility, remote-only versions. Fully programmable, BCD or GPIB. +3 to +13 dBm output  ...more

Test Electronics will customize the TE-2000 GPIB signal routing box for your test application. Then, you simply rack and stack all the equipment, cable all the switched signals to the back of this GPIB box, add a rack mount computer, plug in the National Instruments GPIB board and software. Then run your customized GPIB based test system. ...more

Impedance: 75 ohm ; Control: GPIB ; Frequency Range 0 to 2150 MHz ; Switching Speed 10 ms . ...more

Impedance: 75 ohm ; Control: GPIB ; Frequency Range 0 to 1000 MHz ; Switching Speed 10 ms . ...more