Embedded

The Gator AT industrial controller was designed to satisfy the demands of today's embedded applications in a legacy AT platform (8.6x11.0 form factor). The board is powered by the Intel Pentium M/Celeron M processor, offering a balance of high-performance and low-power operation.  ...more

The DAQTron 3400 Embedded PMC Carrier module provides a fast and efficient way to reduce the processing load from the main system controller. This is accomplished by performing application specific processing locally on the board; reducing unnecessary PCI backplane traffic and maximizing realtime processing capabilities.  ...more

Embedded in a boring or together with a pile or steel sheet pile, measures pore water pressures or pore pressures. ...more

A mixed signal oscilloscope (MSO) is the ideal tool for the design and debug of today?s embedded systems providing the only way to see analog, digital and serial data signals simultaneously on one instrument as they occur in real time. Embedded system designers need to view signals into and out of devices such as microcontrollers, DSPs, FPGAs,A ...more

Compact, rugged extruded package allows the pulse generator to be located wherever most convenient, including embedded applications. Accepts trigger inputs from the Highland electrical signal generators or compatible sources. Optionally equipped units can also accept optical triggers from Highand e/o converters or compatible sources. ...more

ETBoundary provides a complete solution for the creation and integration of boundary scan cells and related control logic for embedded test and diagnosis of integrated circuit (IC) semiconductor I/O as well as test and diagnosis of board-level interconnect nets between ICs. Access to the boundary scan cells is provided through LogicVision's Te ...more

STATS'' Drop In Heat Spreader Quad Flat Pack (DQFP) is a leadframe based, thermally enhanced plastic encapsulated package with gull wing shaped leads on four sides. Thermal enhancement is achieved by “dropping-in” an embedded anodized aluminum heat spreader during the molding process. The fully automated heat spreader loader provides heat spreader ...more

The T560 series is a family of small digital delay generators, intended for use in embedded OEM applications. The T560-1 is the standard, packaged version, usable in many OEM applications and as the evaluation unit for custom versions.Four TTL-level delay outputs, individually programmable for delay and pulse width. 10 ps delay and width resol ...more

Use two special cameras (CCD) to collect signal so that the high beam and low beam can be really reduced its image. The testing data can be given out promptly and accurately. Use a special image analysis card with high speed to digitize the image. An embedded industrial control computer with high performance and low power sumption performs the ...more

Ashling’s Opella-XD EJTAG Debug Probe is the fastest available debug probe for embedded development on MIPS™ RISC cores. ...more

Gain superier insight into analog, digital, or serial design challenges. The Infiniium MSO8104A provides unmatched acquisition performance with up to 128 Mpts of deep memory mapped to a high-definition display, powered by MegaZoom III technology. See signal details never before uncovered by a traditional digital storage oscilloscope (DSO). ...more

The Surface Mount Matrix (SMM) used in ECT contactors is an anisotropic conductive elastomer which allows for a solderless connection to the performance board. The SMM consists of two parts: a silicone rubber base, which provides compliance, and a matrix of conductors embedded in the silicone, which provide the conductive path to the performan ...more

STATS'' Die Pad Heat Spreader Quad Flat Pack (DPHQFP) is a leadframe based, thermally enhanced plastic encapsulated package with gull wing shaped leads on four sides. The DPHQFP heat spreader is designed as an integral part of the leadframe and is fully embedded into the package. The large heat spreader is also designed for use as a power or ground ...more

The Hotronic SDI Multiplexer  combines digital video with digital audio to from the embedded signal. Together with Hotronic video A/D and audio A/D, the Hotronic Multiplexer converts analog video/audio to embeded A/V.  ...more

The T346 is a compact 4-channel, 32 MHz waveform generator. It incorporates four DDS waveform synthesizers that may be used independently or synchronously to produce coherent signals. Waveforms include sine, triangle, sawtooth, Gaussian noise, and precision pulse/PWM outputs. User-loaded arbitrary waveforms may be generated. ...more

Leading the Edge in Hearing Aid and Audio Testing. HearMASTER is developed using LabVIEW®, and its open architecture allows users to integrate own developments in the general system framework. It utilizes a multi-hardware concept. In the general solutions it employs a PC-system, a National Instruments PCI measurement module as well as a dedica ...more

The CANopen Device Monitor is a tool for the graphical inspection and configuration of CANopen devices in a CANopen network. The embedded scripting ability provides access to the implemented CANopen services and makes it possible to write test or control applications with a minimum of effort. ...more

High quality 8051 debugging environment, uniform across the entire spectrum of supported targets. Works with in-circuit emulators, simulators, evaluation boards, and RISM-compatible embedded monitors. ...more

The MP300 TCL2 is the ideal tool for testing contactless or NFC devices. All NFC modes are supported: card emulation, read/write, peer to peer active or passive. Field strength, ASK modulation index, and so on... You can play with all those physical characteristics to check the robutness of your device. The MP300 TCL2 features advanced measurements ...more

The ProDAQ 3043 high-performance Slot-0 Controller provides a powerful, fully customizeable platform for embedded applications. Using Motorola's latest MPC7455 PowerPC processor at speed of 1 GHz and beyond, it provides the computational power for algorithmic-intensive computations.  ...more

RLB-L is used to measure and display heat power in pipes. It is separate structure and convenient for outdoor use. It consists of controller, flow sensor, microprocessor, temperature sensors and flow main meter. Connection line between flow main meter and controller is 3-meter long, which guarantees convenience for swiping IC card by consumer e ...more

The PGR8 eight-port Gigabit Ethernet Switch PMC is part of a family of Gigabit Ethernet switching products from Curtiss-Wright Controls Embedded Computing that extends from products with embedded switching (i.e. CHAMP-AV IV) to large port-count, managed switches including the VME-680 SwitchBlade.  ...more

LogicVision's ETMemory provides a complete solution for at-speed testing, diagnosis and repair of embedded memories, targeted specifically for nanometer scale designs. On-chip generated algorithmic test patterns are delivered to the memories at application clock frequencies.   ...more

The Embedded Target for Motorola MPC555 lets you deploy production code generated from Real-Time Workshop Embedded Coder directly onto the MPC555 microcontroller. The Embedded Target for Motorola MPC555 relies on Real-Time Workshop Embedded Coder for production code generation, and provides code that is specific to the Motorola MPC555 ...more

Embedded in soil, measures underground pore pressures. ...more