DWDM

The OWM is a cost-effective solution for optical monitoring of DWDM networks including DWDM optical power, wavelength, and OSNR. The OWM available in 50 GHz or 100 GHz configurations with up to 8 ports. The OWM is the first shelf-level, intelligent sub-system for centralized management of remote DWDM wavelengths that can also be used as a port ...more

For testing L band of DWDM system and/or supervision channel we have designed FOD 3211 Dual Laser Diode Module with two wavelengths: 1550 and 1625 nm. ...more

The JDSU Agile Optical Components family includes modulators, switches, attenuators and tunable filters. These products provide the basis for spectrally efficient DWDM transmission utilizing dispersion tolerant modulation, channel monitoring, wavelength switching, remote power control and dynamic channel selection. ...more

The WaveReady Transponder 740 (WRT-740) is a multi-rate, multi-protocol, auto-lock module that translates optical signals between a variety of client-side interfaces into a long-reach, single-mode, dense wavelength division multiplexing (DWDM) interface. ...more

The JDSU WaveReady? 100 GHz Optical Add/Drop Modules (OADM) comprise a family of flexible, low-cost solutions to enable capacity expansion of existing fiber. Through use of DWDM technology, a single optical fiber can carry up to 32 discrete optical channels. ...more

The JDSU Agile Optical Components family includes modulators, switches, attenuators and tunable filters. These products provide the basis for spectrally efficient DWDM transmission utilizing dispersion tolerant modulation, channel monitoring, wavelength switching, remote power control and dynamic channel selection.  ...more

The AQ2200-111 is DFB-LD module for the AQ2200 series. When they are mounted in AQ2200 series frame controllers. It provide a high-output, high-stability DWDM measurement. ...more

The TLS-101 is a compact tunable laser source for daily test and measurement applications. The laser can be step-tuned across the C-band communication channels with a tuning resolution of 50 GHz in less than 20 ms. The internal wavelength locker assures that the wavelengths or frequencies of the output light are exactly on the ITU grid of the DWDM ...more

The Model 8008 Modular Controller expands on the modular laser diode controller concept to meet the higher channel densities found in Dense WDM (DWDM) applications and 2-D VCSEL arrays ...more

The Agilent 8166xA Distributed Feedback Laser Sources are part of the Agilent Lightwave Solution Platform, and best suited for amplifier test and DWDM system test applications.  ...more

The WaveReady 3000 series 13 Channel DWDM Multiplexer/Demultiplexer modules can be used instead of expensive DWDM systems to conserve fiber and solve fiber exhaust problems. 13 Channel DWDM Mux/Demux modules have low-loss narrowband filters that allow 13 DWDM, 200 GHz spaced channels to be multiplexed onto a single fiber. ...more

Powerful optical spectrum analyzer (OSA) designed to meet the challenges of DWDM applications. Wavelength accuracy: ±15 pm with external calibration and a resolution bandwidth (FWHM) of 65 pm ORR of 40 dB at 25 GHz and 50 dB at 50 GHz from the peak ...more

The FTB-5230 Optical Spectrum Analyzer (OSA) is designed for testing both DWDM and CWDM systems within metro/access links and long-haul networks. This cost-effective module is housed in the FTB-400 Universal Test System, EXFOs tough, portable test platform. Whats more, the FTB-5230 covers the entire transmission wavelength range, from 1250 to ...more

The JDSU PLC Reconfigurable Optical Add/Drop Multiplexer (PLC ROADM) is designed for system developers building dense wavelength division multiplexing (DWDM) networks for telecommunications, CATV/MSO, and enterprise applications. ...more

The JDSU 10 Gb/s Integrated Amplitude Modulator with Attenuator provides intrinsic attenuation flexibility for multichannel systems. The module employs an integrated attenuator that allows pre-emphasis of all International Telecommunications Union (ITU) wavelengths in a dense wavelength division multiplexing (DWDM) optical link. ...more

The JDSU Agile Optical Components family includes modulators, switches, attenuators and tunable filters. These products provide the basis for spectrally efficient DWDM transmission utilizing dispersion tolerant modulation, channel monitoring, wavelength switching, remote power control and dynamic channel selection.  ...more

The WaveReady Transponder 760 (WRT-760) is a multi-rate, multi-protocol, auto-lock transponder module that translates optical signals between a variety of client-side interfaces into a long-reach, single-mode, dense wavelength division multiplexing (DWDM) interface. ...more

With its remarkable spectral density stability, the cost-effective FLS-2300B from EXFO is an excellent source for fast and reliable characterization of high-loss DWDM passive components such as thin film filters, arrayed waveguides and fiber Bragg gratings. ...more

The FOD2119C provides non-coherent emission in C-band range at 1530-1565 nm. 1mW total optical power - sufficient enough for DWDM component testing in maintenance or service in field or laboratories. ...more

JDSU Agile Optical Components family includes modulators, switches, attenuators and tunable filters. These products provide the basis for spectrally efficient DWDM transmission utilizing dispersion tolerant modulation, channel monitoring, wavelength switching, remote power control and dynamic channel selection. ...more

The WaveReady? 3000 series LightAmp metro-access dense wavelength division multiplexing (DWDM) optical amplifier is a configurable, multi-channel device that provides simple and economical C-band optical amplification in a flexible, ready-to-use package. ...more

JDSU 100 GHz, Narrowband Arrayed Waveguide Gratings (AWGs) provide a price-competitive, small-form-factor alternative to standard thin film based dense wavelength division multiplexing (DWDM). ...more

The CD Plug-in Module for the T-BERD/MTS platforms provides fast and cost-effective CD testing for Metro DWDM deployment. Compact, lightweight, and cost-effective solution for CD measurements. Access to only one end of the link is required for end-to-end testing.  ...more

The COADM Series of Configurable Optical Add Drop Multiplexers selectively adds and drops individual or a set of wavelength channels from a DWDM multi-channel stream. Furthermore, this sub-assembly serves as a node to interchange wavelength channels among fiber routes. ...more

The OSA product line consists of high-precision optical spectrum analyzers designed for dense and coarse WDM applications. They offer improved OSNR ranges and accurate DWDM network measurements with high channel counts and tight channel spacing over the full wavelength range of 1250 to 1650 nm. ...more