The GD-2010B is designed to provide features which are most widely used and favored by professionals in CATV industry at the least cost.It can be used to measure accurately the analogue channels ,digital channels efficiently and effectively with high accuracy rate .Mainly it supports C/N,level,channel power measurement ,voltmeter function,spectrum analysis and so on .Overall ,its functions are easy to use and can be used in a wide range of applications.
This signal analyzer is specially designed and manufactured for CATV system installation and testing. It measures CATV TILT and trunk cable voltage accurately and also tests DVB-C digital signal features including average peak power, MER, BER, C/N, EVM and provides constellation diagram. This instrument tests CATV signal levels in both channel and frequency modes. In scan mode, the signal analyzer store signal levels for each channel. In spectrum mode it provides spectrum display and tests for a...
This handheld CATV/ QAM analyzer is designed for both digital and analog TV analysis. It has digital signal analysis functions for channel power, MER, BER and constellation diagrams for 16/32/64/128/256QAM/QPSK modulation types. Analog channel analysis includes single-frequency level, carrier level of full channels spectrum, HUM, modulation depth, TILT and C/N. This analyzer also features easy operation and fast spectrum analysis. Its cable modem testing mode is compatible with DOCSIS 1.X, DOCSI...
Signal Analyzer is specially designed and manufactured for CATV system installation and testing. It's a portable instrument, easy to carry with many functions. This instrument can test CATV signal level both at channel and frequency modes. With the SCAN mode, it can scan all channels and store signal levels as well.
From satellite dish alignment, to UHF off-air antenna pointing, to cable TV MER measurements, the XR-3 is the meter for you! The XR-3 is the most capable meter offered by Applied Instruments. It’s more durable than the popular Super Buddy meter, and has added features and performance. The XR-3’s modular design with field swappable modules provides wide versatility to fit different measurement applications, including DBS satellite (i.e. Dish Network, DIRECTV, Bell TV, Shaw Direct), VSAT satellite...
The PC-1 is a compact, temperature-stable RF-carrier source. It is accurate enough to calibrate spectrum analyzers, signal level meters or any other receiving devices. When used with a signal level meter, the PC-1 CW test signal generator assists in measuring insertion loss of cable, amplifiers, splitters, and taps using the stimulus-response method.
DIGITAL TV SIGNAL ANALYZER 1750QAM? The very excellent signal analyzers of choice for field testing of QAM digital signals on your CABLE-TV SYSTEM.They demodulate and accurately measure the QAM signals carried through the cable system.They provide the measurement power the field technicians need for the latest 64-256QAM digital technologies and are very simple to use, measuring SNR(MER), EVM, Pre-BER, Post-BER, Constellation Diagram.
he very excellent signal analyzers of choice for field testing of QAM digital signals on your CABLE-TV SYSTEM.They demodulate and accurately measure the QAM signals carried through the cable system.They provide the measurement power the field technicians need for the latest 64-256QAM digital technologies and are very simple to use, measuring SNR(MER), EVM, Pre-BER, Post-BER, Constellation Diagram.
ANALOGUE & DIGITAL SMATV, MATV, CATV ANALYSER. The most powerful field strength analyser in the trade. High resolution colour 6½" LCD monitor. It can optionally be configured with up to three BER cards, an MPEG 2, a Constellation, a GPS, a noise generator and a printer.
It allows measuring of High Definition satellite DVB-S2 signals and DVB-H for mobile TV broadcasting. It covers Cable TV return path. It can display the constellation diagram for DVB-T/H/C/S/S2. Allows automatic measurements through the DATALOGGER function with a massive 128 MB internal memory.
It allows measuring of High Definition satellite DVB-S2 signals and DVB-H for mobile TV broadcasting. It covers Cable TV return path. It can display the constellation diagram for DVB-T/H/C/S/S2. Allows automatic measurements through the DATALOGGER function with a massive 1 GB internal memory.
High dynamic range spectrum Analyzer 5-860MHz. Mainly for Cable TV . Portable Spectrum Analyser with 64 to 256 constellation display capabilities. 5 to 860 MHz. <+-1dB accuracy. Error corrected software. QAM constellation display. MER and BER measurement.
Real time' Spectrum Analyser for CATV, MATV installers. Demodulates Terrestrial Analogue & digital,and digital Satellite (no Satellite Analogue demodulation). Measures Signal to noise(SNR/MER), Bit Error Ratio(BER).Also channel identification. 100 user 'favourite's, <+-1.25dB, 30 to 860MHz , <=+-2dB 950 to 2150 MHz Error corrected Software. Designed for 'ease of use'..The design brief for this instrument was "Minimum pushing of buttons " All relevent information can be shown on one screen.
S7530 is a 75 Ohm analyzer that is portable, lightweight and affordable, yet extremely accurate and feature-intensive, making it ideal for various applications within the Cable and Satellite TV industries, including equipment development, manufacturing, and repair.
Sharp Vision Mini Spectrum AS 960 is an instrument to provide total analysis of your cable TV network. AS 960 is a necessity which not only indicates trouble shooting of Cable TV system but also helps in its maintenance. Sharp Vision Mini Spectrum AS 960 is far superior to the DB Meters available till date, as it has advantages of digital and graphic display of your complete frequency spectrum, Slope, 3 CH, V/A and C/N, which are its major as sets. The accuracy of ±1.5 dB with a resolution of + ...
MIT 3201 is designed ideal for testing, installation and maintenance for Mobile Telecommunication System. Cable TV. Cellular Phone. Satellite TV Reception. Cordless Phone. Hidden Camera Detection. CB Radio. Teletapping Detection. Paging System.
StreamScope RM-40 is a constant stream monitoring appliance. The RM-40 remotelymonitors, measures, and records digital television (DTV) streams to ensure their integrity, reliabilityand compliance with standards and/or templates. The RM-40 is a powerful and user-friendly low cost monitoring solution that verifies DTV streamscarried by service providers such as broadcasters, cable operators, telcos, IPTV and Mobile TVoperators.
dvbsnoop is a DVB / MPEG stream analyzer program, which enables you to watch (live) stream information in human readable form. Its purpose is to debug, dump or view digital stream information (e.g. digital television broadcasts) send via satellite, cable or terrestrial. Streams can be SI, PES or TS. Basically you can describe dvbsnoop as a "swiss army knife" analyzing program for DVB, MHP, DSM-CC or MPEG
SM5011 spectrum analyzer is used for the early test in the development of electrical products, troubleshooting of CATV/MATV system as well as the test and trouble diagnosis of cellular phone/paging systems. Combined with the near field probes of Mz530, it can detect the missing fields of radio frequency.