SunLite UDSL - Compact handheld for testing VDSL2 / ADSL x based IP services The SunLite UDSL addresses key test requirements for Triple Play services deployed over a 'Universal' DSL access network. Features include VDSL2 and ADSLx infrastructure tests and services testing for Data, Video, and VoIP, enabling network service providers to verify and ensure these new IP based services are properly delivered to end users. Another benefit is the support of Triple Play Services features at both the UDSL and 10/100 Ethernet test interfaces, enabling technicians to sectionalize problems at the Customer Premises.

990LT - CopperPro™ Test Set Field Upgradeable Next Generation Telecom Installation & Maintenance Test Set. A flexible, customer-upgradeable field test set for subscriber loop fault identification and voice-data line qualification Supports voice, special services, ADSL, ADSL2+ and VDSL.

990DSL CopperPro - Test Set A next generation field test set for subscriber loop fault identification and location and voice and data line qualification. Replaces up to sixteen traditional test sets.
Troubleshoots and qualifies lines for POTS, ADSL and other special services. Time Domain Reflectometer (TDR) feature allows precision fault location.

PE930 - Telephone Test Set Waterproof tested to an IECIP67 rating, these test sets are so impervious to water they can actually withstand submersion. The PE961 features our DigAlert over-voltage alarm and lock- out function to eliminatethe danger of damaging or knocking out digital service lines. Built-in ADSL Filter. Ten-number speed dial memory (32 digits each). Last number redial. Precise hook flash. Microphone mute. Audible and visual mode indicators. Polarity test in any mode. Unique quick-release beltclip. Premium cord set with bed-of-nails and piercing pin clips. Luminescent Keymat.

FST-ADSL2+ - ADSL2+Tester General Introduction : With it's rugged design, ADT-10 is the ideal hand-held tool for installing and maintaining ADSL/ADSL2+ services. It enables engineer to verify the ADSL transmission parameters as well as ADSL error test, PING test and DMM test. Features: Comply with various ADSL standards, could be used to test ADSL, ADSL2+ and READSL; Rugged design, potable,2.8 inch color LCD display; Programmable auto power-off function; User-friendly manual; Up to 99 results storage; Management software available for uploading testing results via RS232 Function: Verification ADSL transmission parameters (up/down actual and max. rates, attenuation,SNR margin,TX power, and etc.) ;

ADSL Triple Play PIM During the process of installing ADSL services it is necessary to test and verify that the existing copper pair is up to the job. Even more after installation has been done problems may still arise as many customers will upgrade their lines or add new services to their subscription. Many customers will be utilizing the new Triple-Play–Services on this line thus the ISP need to have test equipment that very easy will help the engineer to test everything from commissioning the new ADSL installation all the way to troubleshooting the IPTV or VoIP transmission. AnaCise CSA ADSL ATUR module will help you perform this.

VePAL BX100A - ADSL Network Testing Comprehensive ADSL2+, ADSL2, ADSL link turn up capabilities including ATM and IP test features all supported in a single compact handheld unit. Triple Play Services verification of VoIP, IPTV, and high speed Internet is made possible using powerful IP and Web test features including Web-Browser. Service testing can be performed on either the DSL line using the Modem Emulation mode or on the Ethernet port while connecting and emulating a PC. WiFi and CAT-5e cable testing are powerful features for in-home installations.

PS-15S - Wall-mount POTS Splitter The Wilcom PS-15 Wall-mount POTS Splitter is a passive lowpass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz- 1MHz) energy from interfering with POTS equipment. The PS-15-I3S employs a low-pass filter for standard voicegrade lines

PS-11-I2 - POTS Splitter The Wilcom PS-11-I2 POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz - >1MHz) energy from interfering with POTS equipment. The PS-11-I2 employs a low-pass filter for standard voice-grade lines. 

GAO 2045 - ADSL 2+ Tester GAO 2045 ADSL2+ is a new model handheld telecommunication test set that used for the installation, maintenance and measurement of ADSL2+ service. It supports the testing function such as parameter, error, DMM, PING/TRACE that related to ADSL2+ service, user register authentication and simulation MODEM on the ADSL2+ user?s line side.

QuickTest 500 IPTV - ADSL / 2 / 2+IPTV Tester The IPTV Test Option for the QuickTest 500 IPTV Tester is ideal for the installation, maintenance and commissioning of IPTV services. The QuickTest IPTV Tester (Test Option) helps you quickly find service problems such as: Excessive Network Jitter, Packet Loss, Bandwidth Issues, Channel Change Delay, Missing Channels, Poor Quality of Service.

TraceSpan's TestHead Solution for ADSL TraceSpan's TestHead solution is multi-tier equipment designed for use by all the technical levels at the service provider. The TestHead can produce reports that range from a simple pass/fail for the field technician to a detailed signal level report of an initialization sequence that may be useful to the equipment vendor engineer. The reports and data may be exported for further analysis using the DSL Xpert™ system by an expert engineer at the service provider or R&D engineer at the equipment vendor.

6000DSL - Cable Test The 6000DSL provides the field engineer with a full line qualification and faultfinding solution in one multifunction unit. It is 'housed' in a rugged, robust and reliable package with full PC connectivity, an advanced autotest function and far end remote strap and tone generator. Featuring all of the tools of the Model 6000,the 6000DSL takes this one step further. With advanced fault finding features such as Power Spectral Density, Wideband crosstalk and noise the product is geared towards the broadband field engineer need for both pre-qualifying and then fault finding lines for ISDN, HDSL and ADSL service provisioning.The product follows the renowned Riser Bond approach to ease of use enabling the field technician to quickly and easily migrate from standalone products. It is housed in a rugged and robust box, for all POTS and xDSL service affecting faults the Model 6000DSL is the answer.

GAO330 - xDSL Tester GAO330 is designed to handle all kinds of xDSL lines including ADSL, ADSL2, ADSL2+, READSL. It not only can test xDSL physical layer parameters but also can help you to confirm whether your line is able to support xDSL service.This tester additionally evaluates your line quality. Other features include PPPoE dialing, IE network page browsing, and emulation of the user?s PC+ Modem(connection between user and ISP provider). You can invoke all kinds of tests such as Ping, Ipconfig, Rouge, Tracert after successful connection. GAO330 is able to emulate the user?s PC to test a broadband IP line or have PPPoE dial the user?s Modem to troubleshoot the IP network connection and Modem problem to solve a problem caused by computer.