LT2000 - Line Tester (Base band, ISDN, T1, E1, HDSL, ADSL ) Verify the quality of copper pair or coaxial cable for analog and digital transmission up to 2MHz. The LT2000 can perform the following measurements: NOISE – LEVEL - ATTENUATION - CROSSTALK - RETURN LOSS. For various transmission systems: Base band ISDN T1 E1 HDSL ADSL.

458-AWGN2 - Dual Output AWGN Generator Line Module The Model 458-AWGN2 is the ideal solution for injecting Additive White Gaussian Noise (AWGN) for ADSL, ADSL2, ADSL2+, and VDSL2 chip/modem/DSLAM testing applications.

990LT - CopperPro™ Test Set Field Upgradeable Next Generation Telecom Installation & Maintenance Test Set. A flexible, customer-upgradeable field test set for subscriber loop fault identification and voice-data line qualification Supports voice, special services, ADSL, ADSL2+ and VDSL.

TM108D - Smart ADSL2+ Tester TM108D is providing solution for ADSL 2+ line and modem test. It can quickly locate where the problem point is by synchronized judging test between DSLAM and terminal user. Using TM108E as user terminal, after synchronized with DSLAM, we can know the situation of ADSL and cable by the provided upstream and downstream rate/power attenuation/signal-to-noise/Cyclic redundancy check (CRC)/channel and protocol version information. These help analyze operator’s service quality. TM108E also offers physical test as line voltage，loop resistance，insulation, capacitance，frequency domain attenuation, which is good for cable selection and after-sales maintenance.

TM108E - Smart ADSL2+ (TDR) Tester TM108E is providing solution for ADSL 2+ line and modem test. It can quickly locate where the problem point is by synchronized judging test between DSLAM and terminal user. Using TM108E as user terminal, after synchronized with DSLAM, we can know the situation of ADSL and cable by the provided upstream and downstream rate/power attenuation/signal-to-noise/Cyclic redundancy check (CRC)/channel and protocol version information. These help analyze operator’s service quality. TM108E also offers physical test as line voltage，loop resistance，insulation, capacitance，frequency domain attenuation, which is good for cable selection and after-sales maintenance.

BX100A+ - ADSL Network Testing Comprehensive ADSL2+, ADSL2, ADSL link turn-up capabilities including ATM and IP test features all supported in a single compact handheld unit. Triple Play service verification of VoIP, IPTV, and high speed Internet is made possible using powerful IP and Web test features including Web Browser. Service testing can be performed on either the DSL line using Modem Emulation mode or on the Ethernet port while connecting and emulating a PC. WiFi and CAT-5e cable testing are powerful features for in-home installations.

DA280 - Tester DA280 is a handheld ADSL2+ tester, which provides full testing and analysis of ADSL/ADSL2/ADSL2+ lines accurately and fast, covering physical layer, network layer and cable physical characteristics. Giving a visual determination of the quality of ADSL lines, it is a necessary and ideal tool for installation and maintenance of the ADSL.

PS-15S - Wall-mount POTS Splitter The Wilcom PS-15 Wall-mount POTS Splitter is a passive lowpass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz- 1MHz) energy from interfering with POTS equipment. The PS-15-I3S employs a low-pass filter for standard voicegrade lines

PS-11-I2 - POTS Splitter The Wilcom PS-11-I2 POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz - >1MHz) energy from interfering with POTS equipment. The PS-11-I2 employs a low-pass filter for standard voice-grade lines. 

ST330 - ADSL/VDSL Tester ST330 is designed for present all kinds of xDSL line including ADSL, ADSL2, ADSL2+, READSL. It not only can test xDSL physical layer parameter, but also can help you to confirm whether your line is proper to provide xDSL service.

LSX 2025.x - DSL Line Simulator Bandwidth up to 4.5MHz, covering ADSL, ADSL2+, HDSL, SDSL and SHDSL applications on one and the same platform. Highly accurate simulation for Performance and Compliance testing of transmission devices. Wide variety and flexibility in simulation parameters. Standard libraries and country specific libraries available. Easy operation and dialogue : Win95/98/NT/2000 Graphical User interface.

458-LM-A8-18A - SIMULATOR Simulates 26 AWG PIC as specified in ANSI T1.417 Bandwidth DC to 18 MHz Ideal for testing ADSL, ADSL2, ADSL2+, ADSL2++, VDSL, VDSL2(supports up to Profile 17a) modems/DSLAMs 8 channels per line module Loop lengths programmable from 0 to 15,000 ft in 1,000-ft increments Plugs into our Model 458-CC-16 (16-slot) or 458-3SLB (3-Slot)chassis Channel-to-Channel isolation up to 90 dB

458-LM-A8-36 - SIMULATOR Simulates 26 AWG PIC as specified in ANSI T1.417 Bandwidth DC to 36 MHz Ideal for testing ADSL, ADSL2, ADSL2+, VDSL, VDSL2 modems/DSLAMs 8 channels per line module Loop lengths programmable from 0 to 7,500 ft in 500-ft increments Plugs into our 458-CC-16 (16-slot chassis) or 458-3SLB (3-Slot chassis) Noise Floor less than -150 dBm/Hz

ST335 xDSL - Optical Power Meter I. SummaryST335 is designed for meeting entire network requirement, which functions including xDSL test, LAN test and optical power test..ST335 can test all kinds of xDSL line (xDSL includes ADSL, ADSL2, ADSL2+, READSL etc.) It not only can test xDSL physical layer parameters to confirm whether the line is proper to provide xDSL service or not

GAO A0010006 - ADSL 2+ Tester ADSL2+ is a new model handheld telecommunication test set that used for the installation, maintenance and measurement of ADSL2+ service. It supports the testing function such as parameter, error, DMM, PING/TRACE that related to ADSL2+ service, user register authentication and simulation MODEM on the ADSL2+ user?s line side.

990DSL - CopperPro™ Test Set In its basic configuration, CopperPro offers a broad range of Plain Old Telephone Services (POTS) troubleshooting, fault location and line qualification capabilities. Its Wideband/TDR option adds high frequency transmission testing and qualification functions for services like ADSL, HDSL, HDSL2, HDSL4, ISDN, T1, E1 and DDS. And the TDR feature of the option adds precise fault location and analysis.

ST325 - DSL&PON tester Brief Introduction:ST325 is designed for present all kinds of xDSL line testing (ADSL, ADSL2, ADSL2+, READSL) and PON networks. It integrates two test functions of ADSL2+ copper cable testing and PON fiber cable testing. It is helpful to avoid repeated investment as well as enhance efficiency of maintenance staff.

990DSL CopperPro - Test Set A next generation field test set for subscriber loop fault identification and location and voice and data line qualification. Replaces up to sixteen traditional test sets. Troubleshoots and qualifies lines for POTS, ADSL and other special services. Time Domain Reflectometer (TDR) feature allows precision fault location.

DSLscope - DSL Protocol Analyzer A cost-effective DSL Protocol Analyzer for use in the development and testing of ADSL equipment. DSLscope provides powerful protocol analysis capabilities to engineers and technicians by capturing, decoding and displaying the detailed contents of the DSL ATM AAL5/AAL2 packets passed across an DSL line. DSLscope is the first DSL protocol analyzer to provide the user with visibility of nested packet headers directly on the DSL line.

ST-2048 - New ADSL2+ Analyzer ST-2048 ADSL2+ tester is a handheld, large size displayed and chromatic touch screen operated test equipment. It supports ADSL/ADSL2/ADSL2+ analysis, net and DMM test. It applies WINCE platform, which integrates the test and PC in one tester. It can help the user to judge the PC’s setting is correct or not, and provide the testing data analysis and evaluation report of service quality for access validation and trouble shooting of ADSL/ADSL2+ line. ST-2048 is the best tool for ADSL line maintenance.

PE930 - Telephone Test Set Waterproof tested to an IECIP67 rating, these test sets are so impervious to water they can actually withstand submersion. The PE961 features our DigAlert over-voltage alarm and lock- out function to eliminatethe danger of damaging or knocking out digital service lines. Built-in ADSL Filter. Ten-number speed dial memory (32 digits each). Last number redial. Precise hook flash. Microphone mute. Audible and visual mode indicators. Polarity test in any mode. Unique quick-release beltclip. Premium cord set with bed-of-nails and piercing pin clips. Luminescent Keymat.

6000DSL - Cable Test The 6000DSL provides the field engineer with a full line qualification and faultfinding solution in one multifunction unit. It is 'housed' in a rugged, robust and reliable package with full PC connectivity, an advanced autotest function and far end remote strap and tone generator. Featuring all of the tools of the Model 6000,the 6000DSL takes this one step further. With advanced fault finding features such as Power Spectral Density, Wideband crosstalk and noise the product is geared towards the broadband field engineer need for both pre-qualifying and then fault finding lines for ISDN, HDSL and ADSL service provisioning.The product follows the renowned Riser Bond approach to ease of use enabling the field technician to quickly and easily migrate from standalone products. It is housed in a rugged and robust box, for all POTS and xDSL service affecting faults the Model 6000DSL is the answer.

GAO A0010005 - xDSL Tester designed to handle all kinds of xDSL lines including ADSL, ADSL2, ADSL2+, READSL. It not only can test xDSL physical layer parameters but also can help you to confirm whether your line is able to support xDSL service.This tester additionally evaluates your line quality. Other features include PPPoE dialing, IE network page browsing, and emulation of the user?s PC+ Modem(connection between user and ISP provider). You can invoke all kinds of tests such as Ping, Ipconfig, Rouge, Tracert after successful connection. GAO330 is able to emulate the user?s PC to test a broadband IP line or have PPPoE dial the user?s Modem to troubleshoot the IP network connection and Modem problem to solve a problem caused by computer.