Search Results for AC/DC Power Supplies / AC DC Power Supplies
AC/DC Power Supplies Finero's AC/DC power supplies are designed to stand production testing environment and serve reliably over years without disruption.
AC/DC Power Supplies At ABSOPULSE Electronics, we specialize in the design and manufacture of heavy-duty custom and semi-custom AC-DC switching power supplies, rectifiers and battery chargers. We can meet any AC to DC input/output configuration requirement, with output power ranging from a few watts to several kilowatts. ABSOPULSE's rugged power supplies are typically designed and built for an operational life of 20 to 30 years in harsh environments.
AC-DC Power Supplies Covering a power range of 2 to 4,920 watts, Emerson Network Power's range of low to medium power AC-DC power supplies include open-frame and enclosed models, DIN rail power supplies, external power adapters and power factor correction modules. Our products are mainly comprised of highly configurable modular power supplies and rack-mounting bulk power units.
AC-DC POWER SUPPLIES Universal Input 85-264 VAC. Continuous Short Circuit Protection. PCB Mountable. Efficiency to 82%. Industry Standard Pin Out. Meets, UL, CSA, TUV CE
PWS1000R - AC/DC POWER SUPPLY The PWS1000R Series of rackmount power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source. Circuit innovations reduce output ripple to levels previously available only from bulky and inefficient linear power supplies. Reliability features include an input fuse, thermal shutdown, current limiting and output short circuit protection with automatic recovery.
PWS310 - AC/DC POWER SUPPLY The PWS310 Series of power supplies provides 12, 24 or 48 Volts DC at 300 Watts of continuous power from a 110 or 220 Volt AC source.
PWS610 - AC/DC POWER SUPPLY The PWS610 Series of power supplies provides 12, 24, or 48 Volts DC at 600 Watts of continuous power from a 110 or 220 Volt AC source.
AC-DC High Voltage Power Supplies These modular High Voltage supplies may be used as constant voltage or constant current sources. They may be remotely programmed by means of either voltage or resistance, and have provisions for remote monitoring and output inhibiting. All control and monitoring connections are on a pluggable terminal block that functions as a connector, providing wiring convenience and permitting easy and rapid connect/disconnect. Outputs are arc/short circuit protected.
AC-DC Power Modules TDI Power designs and manufactures AC - DC power solutions for a wide range of markets and applications. With rising demands for higher power density, smaller size, more portability TDI Power continuously improves its range of AC-DC power supplies. With products ranging from a few hundred watts within a simple power shelf through to configured solutions at 100kW+ TDI has a broad portfolio of products to draw on.
PDTS - AC/DC Partial Discharge Equipment Hipotronics and Robinson Instruments team up once again as your reliable, single source supplier for Partial Discharge Test Systems (PDTS). We offer a full line of AC and DC systems to suit a wide range of partial discharge test applications. Our systems feature Hipotronics PD free AC and DC power supplies and the Robinson Instruments DDX?Series of partial discharge detectors.
AC/DC Hall Effect Current Sensors General Purpose Inverters. AC/DC Variable Speed Drivers. Battery Supplied Applications. Uninterruptible Power Supplies (UPS). Switched Mode Power Supplies (SMPS)
63800 Series - Programmable AC & DC Electronic load Chroma's 63800 Series AC&DC Electronic Loads are design for testing uninterruptible power supplies(UPS), Off-Grid Inverters, AC sources and other power devices such as switches, circuit breakers, fuses and connectors. The Chroma 63800 Loads can simulate load conditions under high crest factor and varying power factors with real time compensation even when the voltage waveform is distorted.
1U Half Rack 750W AC / DC Programmable Power Supplies The Genesys family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in half rack configuration at 750W, designated GENH, and with available output voltages from 7.5 to 600V, and current up to 100A. Active PFC, and universal input head a long list of standard features. Together with the Full Rack Models at 750W and 1500W, and the new 2U 3.3kW, they provide the perfect basis for flexible Test and Measurement System design.In addition to highest power density, for the first time a universal input is available in this size and power. The wide range input is not just dual range, but continuously variable from 85-265VAC, single phase, 50/60Hz. It also features Active Power Factor Correction of 0.99 at full load, another first in this size and density. This assures operation in difficult AC environments and meets European EMC requirements.Other significant safety features include Safe Start and Last Setting Memory.
PFE Series - 500 to 700W Full Brick AC-DC Power Supplies Low profile, small size 100°C baseplate temperature High power density High Efficiency
MTW Series - 15W to 60W Low Profile AC-DC Power Supplies 26mm Height 3 Year Warranty Peak Load Capable Light Weight Output 1 isolated from Outputs 2 and 3
Programmable AC to DC Power Supplies (6V to 600V) • Models from 750W to 90kW • Voltages from 6 to 600 V • Current from 1.6A to 3000A • Remote Analog programming
• IEEE488 & RS-232/485 Interfaces • LXI-C Compliant LAN Interface • Analog and digital control interfaces • Worldwide AC Inputs with Active PFC* • Advanced Parallel Operation • CE and UL safety Approvals * Not available on all models
As-513 - Low loss Simulated Electronic Load (AC / DC) The As-513 can be used as an electronic load device for load testing AC power supplies and power equipment (instead of resistors, inductors, capacitors, or dummy network).
10/15kW - 3U 10/15kW AC / DC Programmable Power Supplies This member of the Genesys(TM) product family of programmable switching power supplies provides high power density, low ripple and a complete set of user-friendly interfaces. In addition to high power density, popular worldwide single and three phase inputs are available. This assures operation in difficult AC environments and meets European EMC requirements. AC/DC, rackmount, programmable power supplies. Outputs available range up to 600V and 1,000A. In addition to saving space, GenesysTM power supplies contain extensive standard features that provide a new level of performance and flexibility in ATE, Industrial and Communications applications.
2161 - Low Harmonic Distortion Three Phase 9 KW AC/DC Power Supply This multi-kilowatt AC/DC power supply operates from 115 Vrms, three phase, 60 Hz delta MIL-STD-1399 Section 300A input power. It produces an isolated 150 VDC output voltage which powers other electronic devices that utilize universal input power supplies.
AC-DC Wide Adjust - Output Power Supplies Highly Configurable, with a seemingly Infinite number of Options Remote Sensing Open Sense protection Isolated output Short circuit and overload protection with enhanced surge capabilities No minimum load required Internal EMI Filtering Pluggable connectors Can be mounted on two surfaces in any orientation
VME Series - Power Supplies Behlman is known for a long list of commercial off the shelf (COTS) products, including AC to AC, AC to DC and DC to DC power systems. We can configure our COTS units with fixed or adjustable outputs; custom enclosures and packaging; custom connectors and performance requirements. Behlman has successfully supplied a variety of modified COTS power supplies for industrial and mission critical, military and OEM applications. If you are interested in a high reliability, rugged UPS solution for your industrial or military application Contact the factory to discuss your requirements All Behlman COTS power supplies are ruggedly built and designed to meet the rigors of high end industrial and military applications on aircraft, shipboard, ground or mobile platforms.
AC power supplies Lineups of high performance AC power supplies with versatile functions and abundant output power in compact size. Such compactness and high efficiency is realized with proprietary switching amplifier method. Lineups include models with both AC and DC outputs or with 3 phase outputs, and they are ideal AC supplies for evaluation of all kinds of motors and power conditioners, production line, testing of AC input device or as handy frequency converting device.
Military Power Supplies NAI offers a wide variety of COTS and Custom Power Supplies and DC/DC Converters, specifically designed for the rugged-Military and Commercial Aerospace markets. All of our AC/DC power supplies and DC/DC converters provide high power-density, low profile, high reliability, and rugged packaging. They are available in ratings from 15 watts through 1,500 watts.
1U - Switching Power Supplies The 1U family of programmable AC-DC power supplies sets a new standard for flexible and reliable power for your application. Available in a Rack Mounting or Benchtop at 720W power levels with single output voltages ranging from 3.3 to 135V and current capabilities up to 70A.
Results 1 - 24 of 54
- AC DC Power Supplies x
- AC DC Programmable Power Supplies (8)
- AC Sources (12)
- Cards (6)
- Chargers (5)
- Control (5)
- Current Sources (6)
- DC Current Sources (6)
- DC Sources (8)
- Loads (9)
- Modules (10)
- Power Switches (6)
- Power Test Systems (6)
- Programmable AC Power Supplies (8)
- Programmable DC Power Supplies (8)
- Programmable Power Supplies (8)
- Sources (15)
- Switches (9)
- Switching (13)
- Switching Power Supplies (11)
- Test Systems (7)
- »See all 109 Categories
- Battery (3)
- Circuit (5)
- Current (18)
- Discharge (4)
- Electronics Test (4)
- EMC (3)
- GPIB (3)
- HIgh Current (6)
- High Voltage (5)
- High Voltage Test (3)
- I/O (3)
- kW (7)
- Line (5)
- Phase (6)
- Power Factor (4)
- Power Supply Test (18)
- Resistance (4)
- Single Phase (4)
- Standards (12)
- Voltage (10)
- »See All 121 Features