SMR 4518 - EMI Measuring Receiver 9kHz Fully CISPR 16-1 compliant. Easy operation. 8.5' TFT-colour display. Frequency accuracy of 10 -6. Overranging protection by pre-selection and auto-ranging. Perform scalar analysis on quadripole networks with control of an external signal generator. 9kHz bandwidth usable in the GHz range

NFPS1 - Near Field Probe Set Locate emission 'hot-spots'. Check on mechanical screening performance. Isolate faulty components

GTEM - Test Cells for EMC Testing DC to 20GHz Emission and immunity testing in one fixed, shielded environment. Meets IEC / EN 61000-4-20 and FCC ANSI C63.4. Generated fields are largely homogeneous and simple to calculate. Efficient power conversion requires smaller power amplifier

JT 5510 - Transient generator / JT 5550 Load dump generator Plug-in modules for JASO D001-94. For many classic Japanese immunity tests. Cost-effective addition to the NSG 5500 automotive transient generator

KEMA 801 - RF Attenuation clamp High decoupling. Suitable for use with KEMZ 801. Simple insertion in the test set-up

NSG 3040 - 4 kV Solution for CE Applications Modular, expandable system Surge voltage to 4.4 kV EFT/Burst to 4.8 kV/1 MHz PQT to 16 A/260 VAC & DC Easy to use 7" touchscreen color display TA (Test Assistance) for rapid test resolution Parameters can be changed during test Wide range of optional test accessories

RSG 3000 - Reference Spectrum Generator 1 MHz to 6 GHz The RSG 3000 is a reference generator for the frequency range from 1 MHz to 6 GHz. The comb generator is supplied by a high stability temperature compensated crystal oscillator (TCXO) and generates a frequency spectrum with a line spacing of 10 MHz, 5 MHz or 1 MHz

RSG 1000 - Reference Spectrum Generator 1 MHz to 1 GHz The Reference Spectrum Generator is an independent, RF signal source with a wide range of metrological applications. The RSG 1000 exists of a battery powered comb generator and generates in the frequency range from 1 MHz to 1000 MHz manually selectable frequency spectra of 1, 5 or 10 MHz.

DIA 1512D - Discontinuous Interference Analyzer Fully meets EN55014-1 and CISPR 16-1. New Windows 'Clickware' software. Modular system under software control. Waveform display. CISPR 14 2000 compliant

NT 5510 - Nissan Transient Generator Plug-in modules for ?classic? Nissan transients. Compliant with 28400 NDS07 (1998) and 28400 NDS03 (1997). Cost-effective plug-in solution to expand test capabilities

AMZ 41A - Absorbing Clamp for CISPR 14 As specified in CISPR 16. Suitable for power measuring according to CISPR 14 (EN 55014) on a slide lane. Frequency range 30 - 1000MHz. Up to 25A operating current. Ruggedly designed.

AutoStar - Software for Immunity Applications AutoStar is our leading software for immunity applications, combining an operating program for test routines, a test management platform for full control of the capacitive discharge transient simulations, supply voltage variations and other automotive immunity tests.

NSG 5500 - Automotive Transient Immunity Tests Built on capacitive discharge circuitry, the NSG 5500 improves on the exclusive Gemini technology and expands on the unique pulse shaping qualities offering the only solution fully compatible with every immunity requirement from ISO 7637-2:2004.

RSG 2000 - Reference Spectrum Generator 1 to 18 GHz The RSG 2000 is a reference spectrum generator covering the frequency range of 1 to 18 GHz. It can be used for checking the parameters of Open Area Test Sites (OATS), anechoic chambers or other alternative measuring environments. The RSG 2000 is also suitable for daily checks of the measuring equipment. The comb generator uses a temperature stabilized quartz oscillator.

EMC - Radio Frequency Test Equipment A complete range of EMC radio frequency test equipment ranging from measuring receivers, power amplifiers, GTEM cells to very powerful software for the automation of EMC test houses, completed with a high number of accessories and system reference verifiers such as reference radiation sources.

RFB / RFC 2000 - RF Switch network Easy to control via IEEE488 interface (two main remote instructions). Listener and talker functionality. The real switched position is readable. Self learning systems are possible. Quasi unlimited switch numbers. Modular system

SMR 4503 - EMI Measuring receiver 9kHz Fully CISPR 16-1 compliant. Easy operation 8.5' TFT-colour display. Frequency accuracy of 10 -6. Overranging protection by pre-selection and auto-ranging. Perform scalar analysis on quadripole networks with control of an external signal generator. Up-grade possibility to 18GHz

SCR 3501 / 3502 - EMI Measuring receivers 9kHz Portable and fully CISPR16-1 compliant. Two models; 9kHz - 1GHz and 9kHz - 2.75GHz. Battery operation provides complete ground isolation. Time domain analysis

NNB 51 - Dual-line-V-impedance Stabilization Network (LISN) Line impedance stabilization network (LISN) such as the NNB 51 are used to measure distortion signals on the mains cord of an electrical equipment under test (EUT). Dual-line-V-LISN. Compliant to CISPR 16-1-2. Current up to 16 Amps. Frequency range 9 kHz to 30 MHz.

CSP 9160A - Current Sensing Probe Wilde range for most monitoring applications. Frequency range 10kHz - 100MHz. Window diameter of 25.4mm. 0dB transducer factor between 500kHz and 100MHz

NSG 5600 - Complex Voltage Variations, Magnetic Field Test, Sinusoidal Burst Based on a function generator/amplifier combination, the NSG 5600 includes features for simulation of vehicle voltage starting profiles, dips and drops, transformer coupled and other sine wave noise and magnetic field immunity testing.

KEMZ 801 - EM-clamp for IEC / EN 61000-4-6 As specified in IEC / EN 61000-4-6. Very efficient coupling. Can be used on almost any cable. Decoupling >10dB >10MHz. Ruggedly designed

NSG 4070 - EMC Immunity Test System An advanced combination of signal generator and compact immunity test system. Its large frequency range from 9kHz to 1GHz and its modular set-up using internal or external amplifiers enable a large variety of applications including tests according to IEC 61000-4-6, various BCI applications as well as signal generator and power meter for test systemsas per IEC 61000-4-3, IEC 61000-4-20, IEC 61000-4-21 and many other applications.