Techno Instrumentation (India) Private Limited
Instrument that can single-hand detect all types of faults. Moreover they are also determined to produce technically advanced instrument that reduces the time required for the location of fault. After presenting the LCD interface with our instruments, we are searching new avenues to provide touch screen interface.
|Sponsor Your Catalog|
DIGIPOINT - Cable Fault Locator Our product range that is available in the name of DIGIPOINT is specially designed by our company TIL. It has dual channel and digitalized acoustic faulty locator and can be combined with surge generators for finding the correct position of faults in different types of underground cables. It also point out the cable on the bases on sensing and amplification of electromagnetic signals that are generated while the surge is produced. Extremely sensitive acoustic, magnetic sensor. Coincidence figure readout. Built to withstand rugged field conditions. Headphones for acoustic signal. Proportional signal on large L.C.D. Screen for magnetic and acoustic indication. Light weight receiver. Easy to use.
T-1020(8) - Cable Fault Locator Suitable for fault location in L.T. to 11 K.V. High voltage testing up to 20 KVDC. Limited Burning Capability. 800J Energy on 5, 10, 20 KV Range. Built in ICM & Decay Coupler for Reflectometer T-510. Built in ARC Reflection Filter. Suitable as thumper required for pinpointing of fault. Suitable to operate on mains (220-230/240 VAC, 45Hz up to 60 Hz) or portable generator.
T-1502 - Cable fault Locator Portable, Battery operated. For pre-location of low & high resistance constant leakage fault. When used with suitable high voltage DC supply. Suitable for constant leakage fault up to 5 K.V. DC. Gives reading in % of cable length. Accuracy up to 1% of fault distance. Null deflection by means of LED. Calibrated ten turn potentiometer.
CIS - CABLE IDENTIFICATION SET The cable identification system consists of Pulse Transmitter, Directional Tongs and Pulse Receiver Saw toothed impulses from the transmitter are fed into the cable to be identified. Identification Tongs applied on the cable receive them as DC impulse and are indicated on the receiver unit. Direction of current of these impulses identify the wanted cable.
T-1005 - Surge Generator The surges produced help in pinpointing the fault and tracing the route of the cable when used with acoustic DIGIPOINT surge generator generates D.C. high voltage for pressure testing of the underground cables to find out faulty phase and the breakdown voltage with leakage current.
TDR -75 - Cable Fault Locator TDR-75 Power Cable Fault Locator is a portable, easy to use, single-phase unit for cable fault pre-location by using the Time Domain Reflection (TDR) method on low, medium and high voltage cables. Further fault location methods are available with the application of the appropriate coupling device. Its measuring ranges enable pre-location on cable lengths from 0 m to 16km. TDR-75 Power Cable Fault Locator is operated via function keys and is fully menu guided. The unit is supplied with rechargeable batteries.
Surge Generator T-1032(10RLM) - Cable Fault Locator Suitable for fault location in medium high voltage cables. High voltage testing up to 32 KV DC. Up to 500mA maximum Burning Capability. 1000 JOULES Energy on 8, 16,32KV Range. Inbuilt Reflectometer T-510 with LAPTOP for taking distance to the fault. Built in ARC Reflection Filter. Suitable as thumper required for pinpointing of fault. Suitable to operate on mains (220-230/240 VAC, 45Hz up to 60 Hz) or portable generator.
T-40H - DC High Voltage Testing Set Instrument has been primarily designed to produce DC high voltage for High Voltage (Proof Testing) of High Voltage Cables up to 40 KV DC. The instrument is well protected & has zero volt interlock to safe guard sudden exposure of personals. It is continuously variable and produces 0-40 KV DC output, voltage & mA analog meter are provided to note the reading for high voltage applied & leakage current.
Surge Generator T-1016(8) - Cable fault Locator Cable Fault Locator : Suitable for fault location in medium high voltage cables. High voltage testing up to 16 KVDC. Limited Burning Capability. 500J Energy on 4, 8, 16 KV Range. Built in ICM & Decay Coupler for Reflectometer T-510. Built in ARC Reflection Filter. Suitable as thumper required for pinpointing of fault. Suitable to operate on mains (220-230/240 VAC, 45Hz up to 60 Hz) or portable generator.
T-1004 - Cable Fault Locator For fault location in L.T. and control cable. For high voltage testing of L.T. cables. Suitable to connect to Reflectometer for taking distance to the fault. Good output power. Compact and lightweight. Suitable to operate on mains (220-230/240 VAC, 45Hz up to 60 Hz) or portable generator. Rugged steel body.
Reflectometer T-510 - Time Domain Reflectometer Pulse Echo, Impulse Current & ARC Reflection Method.
10 Arc graphs + 1 reference graph for accurate & certain fault distance. Five waveforms for comparison. Easy to use Cursor. Large graphs storage capacity.Online support for experts reviews the fault graphs. Compact small, light weight design.
Suitable to operate on mains (220-230/240 VAC, 45Hz up to 60 Hz) or portable generator.
Results 1 - 11 of 11
- Cable Fault Locators (7)
- Cable Identifiers (1)
- Cable TDR (1)
- Control (1)
- Couplers (2)
- Fault Locators (7)
- Filters (3)
- Generators (7)
- High Voltage Meters (1)
- Impulse Generators (1)
- Instruments (1)
- Locators (7)
- Potentiometers (1)
- Receivers (2)
- References (1)
- Reflectometers (5)
- Sensors (1)
- Signal Generators (1)
- Surge Generators (3)
- TDR (5)
- Testing (3)
- Transmitters (1)
- Waveform Generators (1)