Test

Motor Test for Electric Scooters

*The performance data of electric motors, in the majority of all cases, is performed by a brake test. Power input is calculated from current and voltage. Torque and power output are measured with a brake. It is important to reach, for each point, a persistent temperature. In case of large outer rotor BLDC motors, which are usually used for electric scooters, this traditional procedure may take many hours to complete, and is very complicated. *For several years, an innovative motor tester of MEA Testing Systems Ltd. is on the market. This testing system avoids any temperature confusion by testing a motor at constant temperature over the entire speed range. The test procedure is very fast, and gives the full load performances, including PWM current, voltage, torque, and driver efficiency, from stall up to no load. *During the test procedure, the motor is freely accelerated from stall to no load speed. The load of the motor is only the predetermined inertia of the rotor. From the moment of inertia and the acceleration, the torque of the motor is calculated and, also, the power output over the whole speed is given. Since the entire measuring time, depending on the motor size, is usually less than one second, the motor has no time to warm up. It remains at room temperature.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Potential Transformer Test Set

Supreme Instrument Laboratories

The two voltage vectors, one from Standard Potential Transformer and the other from the Potential Transformer under test energies the high permeability magnetic core and then associated windings try to annual the residual magnetism which occurs due to error. The differential vectors will be proportional to phase error and ratio error magnitudes.

Product Home Contact/Sales Company Catalog Share Add To List

Test Solution Development / Integration

Eurofins Digital Testing

Whether you’re a Digital TV Operator, standards organisation, software developer, OTT solution provider, application developer or equipment manufacturer, we have the expertise to help you develop, execute, test and report on the performance of your product so you always come to market with your best foot forward.

Product Home Contact/Sales Company Catalog Share Add To List

Build-to-Print for Test Systems

Ball Systems, Inc.

Built-to-print / test system replication addresses your internal capacity and capability constraints. Ball Systems has perfected quoting, procurement, planning, assembly, testing, quality, delivery and installation to ensure your testers are on-time and on-budget, and meet design and production standards while keeping open and transparent communication.

Product Home Contact/Sales Company Catalog Share Add To List

Curved Needle Test Systems

Instron

The Instron® Curved Needle Testing System is built on the 5900 system platform and is ideally suited for needles used in abdominal, fistula, vascular, intestinal, or other surgical procedures. This system provides two different needle testing solutions: one for curved needle puncture testing and one for bend testing. The curved needle puncture testing fixture is used to evaluate needle sharpness and insertion force, while the needle bend testing fixture is used to evaluate flexural properties of the needle during use. With its tabletop design, the Curved Needle Testing System has a small footprint and takes up minimal bench-top space. The testing system operates with Instron Bluehill® Universal software that provides test control, data acquisition, test results, and reports, as well as a large library of calculations.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

BACnet Quick Test (BQT)

PolarSoft Inc.

BQT is an easy-to-use all-purpose BACnet device discovery, analysis and testing tool for Windows. BQT runs under Windows 7/8/10, Server 2008/2012 and XP, and provides a simple set of client features tailored to the needs of end-users, installers and product developers who just want to run some quick tests.

Product Home Company Catalog Share Add To List

HSI System Test Panel

TA-500 - Tech-Aid Products

This panel was designed to test primarily the NSD360 series of HSI systems. Panel allows running the complete system on the bench. Included is a panel mounted TA-902 API which can also be used for testing external instruments via a panel mounted switch. The API and standard meter drives allow testing many different instruments.

Product Home Contact/Sales Company Catalog Share Add To List

Pick and Place Test Handler

Delta Eclipse - Cohu, Inc.

Eclipse delivers scalable performance for testing a wide range of semiconductors, from analog ICs to high-performance CPUs and mobile processors. The Eclipse is a high-speed pick-and-place handler designed to test up to 16 Integrated Circuits (ICs) in parallel, at temperatures from -45°C to +155°C*, with throughput up to 13,000 UPH.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Power device test system

ShibaSoku Co., Ltd.

This system is suitable for DC testing of IGBT, IGBT module (1in1～7in1). Built-in hi-current switching relay circuit inside test head, it is capable ofDC testing from device itself to module. Highly accurate repeatability testing is available by high speed rise time which is suppressed its heat in hi-current

Product Home Contact/Sales Company Catalog Share Add To List

Test Adapter / Vacuum Adapter

GPS Prüftechnik GmbH

GPS testing technology offers a large selection of vacuum adapters. The support with vacuum (negative pressure) results in increased ease of use and larger pressures can be built up easily and thus more test needles can be contacted.We recommend the use of vacuum hoods or, if contact is required on both sides, our vacuum swivel hood.

Product Home Contact/Sales Company Catalog Share Add To List

Audio Test Tone Generator

ToneGenerator - NCH Software Pty Ltd

Tone Generator is a sine wave generator, frequency generator and signal generator that lets you create audio test tones, sweeps or noise waveforms using your computer or a PDA handheld. Generate sine wave, square wave, triangular waveform, saw tooth waveform, impulse, white noise and pink noise.

Product Home Contact/Sales Distributors/Reps Article Company Catalog Share Add To List

Three-Phase Relay Test Set

CMC 353 - OMICRON electronics

With its compact design and low weight of 13.3 kg / 29.3 lbs, the CMC 353 provides the perfect combination of portability and power. It is the ideal test set for three-phase protection testing and the commissioning of SCADA systems. The powerful current outputs (3 x 32 A / 430 VA) optimally support 5 A relay testing.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Grips and Fixtures for Test Stands

AMETEK Sensors, Test & Calibration

Our comprehensive range of grips, fixtures, jigs and probes cover most test applications within a wide range of industries. Below you will find a selection of our most popular grips, fixtures, jigs and probes. If you cannot find what you are looking for, please contact us for a presentation of our full range.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Step-Top Box Test Platform

Promptlink Communications, Inc.

Promptlink’s Set-Top Box Test Platform (STBTP) is a complete functional testing solution designed for the highest volume testing requirements. With only the highest-quality, highest-speed components, STBTP is the ultimate tool for accurate, high-demand testing of set top boxes. With support for satellite, DAC-based and DVB-based set-tops, STBTP is the solution that never leaves you unsatisfied.

Product Home Contact/Sales Company Catalog Share Add To List

Simulation Software and Test Solutions

Simcenter Software - Siemens Digital Industries Software

The Simcenter portfolio uniquely combines 1D simulation, 3D CAE and test to help you predict performance across all critical attributes earlier and throughout the entire product lifecycle. By combining physics-based simulations with insights gained from data analytics, Simcenter helps you optimize design and deliver innovations faster and with greater confidence.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

Filter Results By:

Products

Applications

Manufacturers

Motor Test for Electric Scooters

Potential Transformer Test Set

Test Solution Development / Integration

Build-to-Print for Test Systems

Curved Needle Test Systems

BACnet Quick Test (BQT)

HSI System Test Panel

Pick and Place Test Handler

Power device test system

Test Adapter / Vacuum Adapter

Audio Test Tone Generator

Three-Phase Relay Test Set

Grips and Fixtures for Test Stands

Step-Top Box Test Platform

Simulation Software and Test Solutions