Filter Results By:

Products

Applications

Manufacturers

Meters

sense and display measures of gas, water, electricity, particles, vibration or light.


Showing results 3511 - 3525 of 4390 products found.

  • FieldFox Handheld Analyzer Software

    Keysight Technologies

    FieldFox can be configured as a cable and antenna analyzer, vector network analyzer, spectrum analyzer, built-in power meter and much more using software/firmware functionality. All functions listed on this page can be installed at the time of FieldFox purchase or can be upgrade via a software license key. Select the functionality you need today and add more features as your needs change.

  • Flow Monitor

    B2800 - Badger Meter

    The B2800 flow monitor is an advanced microprocessor-based monitor that is also low cost and simple to operate. When ordered with a Blancett turbine meter, the B2800 monitor is configured at the factory for units of rate and total, or the unit may be easily programmed in the field. The monitor has a large two-line display and is available in power and mounting options to suit almost any application.

  • Fuse Buddy PRO Test Kit

    310 - Electronic Specialties Inc.

    Great new tool with 3 interchangeable test functions. 1) 30 Amp MINI - Circuit Amperage Testing 2) 30 Amp ATC - Circuit Amperage Testing 3) 30 Amp All Purpose Amperage Testing *The new Fuse Buddy Pro Kit can read amperage draws on both ATC and Mini fused circuits up to 30 Amps. *As an added bonus, the Fuse Buddy Pro can be used as an all purpose amp meter with the included 30A test clips.

  • E-Series Average Power Sensor

    E9301H - Keysight Technologies

    Measure the average power of all modulation formatsWide dynamic range power measurements from -50 dBm to +30 dBm10 MHz to 6 GHz frequency coverage for Wireless Comms formatsLow SWR for reducing mismatch uncertaintyCalibration factors, linearity and temperature compensation data stored in EEPROMCompatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters

  • E-Series Average Power Sensor

    E9300B - Keysight Technologies

    Measure the average power of all modulation formatsWide dynamic range power measurements from -30 dBm to +44 dBmFrequency range 10 MHz to 18 GHzLow SWR for reducing mismatch uncertaintyCalibration factors, linearity and temperature compensation data stored in EEPROMCompatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters

  • E-Series Average Power Sensor

    E9300H - Keysight Technologies

    Measure the average power of all modulation formatsWide dynamic range power measurements from -50 dBm to +30 dBmFrequency range 10 MHz to 18 GHzLow SWR for reducing mismatch uncertaintyCalibration factors, linearity and temperature compensation data stored in EEPROMCompatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters

  • E-Series Average Power Sensor

    E9301A - Keysight Technologies

    Measure the average power of all modulation formatsWide dynamic range (-60 dBm to +20 dBm) and frequency range 10 MHz to 6 GHzHigh maximum power specificationLow SWR for reducing mismatch uncertaintyCalibration factors linearity and temperative compensation data stored in EEPROMFast measurement speeds (up to 400 readings per second with the Keysight E4416A)Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters

  • E-Series Average Power Sensor

    E9301B - Keysight Technologies

    Measure the average power of all modulation formatsWide dynamic range power measurements from -30 dBm to +44 dBm10 MHz to 6 GHz frequency coverage for Wireless Comms formatsLow SWR for reducing mismatch uncertaintyCalibration factors, linearity and temperature compensation data stored in EEPROMCompatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters

  • Noise Monitoring Kit

    LxT NMS SoundExpert - Larson Davis, Inc.

    In addition to the SoundExpert LxT meter, this kit includes the EPS042 protection case and D-cell battery pack, the EPS2116 microphone protection shroud, and EXC010 10 ft. cable. Using D-cell alkaline batteries, allows the noise monitor to be smaller and lighter; avoid the expense of shipping heavy lead acid batteries and the hassle of recharging. You can transport it easily to your site, deploy it, measure data, retrieve your system, download the data, and issue your report.

  • Multi-functional Teslameter

    PG-5A - Yuxiang Magnetic Materials Ind. Co

    Our PG-5A multifunctional teslameter adopting favorable linearity Hall elements as its measuring probe and class 0.5 meter as its outputting display, it has 10 ranges for linear scale, i.e. 5mT, 10mT, 20mT, 50mT, 100mT, 200mT, 500mT, 1T, 2T, 5T, the accuracy for the medium field is better than 1.5%(full scale)

  • IoT Products

    Asiczen Technologies

    LoRaWAN enabled smart water/energy meters for public utility companies as well as housing societies, factories and institutional campuses enable more efficient usage of resources. AMR system implemented using long range LPWAN technology, can provide periodic metering data apart from other useful parameters, that users may be intrested in. End devices can be controlled using downlink commands from central server. This is useful for remote monitoring/control applications using public/private network infrastructure. This leads to reduction of non revenue water and energy theft.

  • Ironless Motor Positioners

    I-FORCE Positioners - Compumotor Division of Parker Hanni

    Ironless Motor Positioners. Six different product series with configurable options for "best fit" linear motor solution. I Force Ironless design for maximum efficiency, patented, RE34674. Standard Travel lengths up to 3 meters with easy customization. Cable track options accommodate customer payload tubes and cables along with motor and encoder cables

  • Logic Source

    Anewin

    The Logic Source provides 9-channels of 100MS/s digital pattern generation. It utilizes the 0.5 Meter Logic Source probe with controlled output slew rates for easy connection your circuit. Up to a 1,020 pattern vectors can be programmed, each with a specified duration between 30 ns and 40 ms (milli-seconds) with 10 ns of timing resolution. Patterns are output in sequence but can include looping, conditional/unconditional branches, and trigger output statements.

  • Class 1 Measuring Instrument

    Bedrock SM90 - Bedrock Audio

    The Bedrock SM90 is a versatile class 1/ type 1 acoustic measuring instrument, suitable for a wide variety of applications. With its high-quality 1/2" prepolarized microphone capsule, it is the instrument of choice whenever accurate and reliable acoustic measurements are required. The Bedrock SM90 conforms with class 1 requirements as a Sound Level Meter (IEC 616272), but also offers a variety of other functions:

  • Collapsible 6 Inch Charge Plate Monitor Assembly

    CPM-760A - Prostat Corporation

    The CPM-760A is a 20pF, 6-inch Charge Plate Monitor assembly intended for use with the Prostat PFM-711A Field Meter, PCS-730 Charging Source and PDT-740B Static Decay Timer. This handy accessory is designed to perform very accurate performance audits on overhead ionizers and room ionization systems. Used with extension wings, the CPM-760A is also used to evaluate and balance bench top ionizers.