Filter Results By:

Products

Applications

Manufacturers

Light

Visible spectrum of electromagnetic radiation from 400nm to 700nm.


Showing results 1066 - 1080 of 1919 products found.

  • Atomic Emission Spectrometer

    QualiAES - Qualitest International Inc.

    The Atomic Emission Spectrometer - QualiAES is mainly used in the quantitative analysis of metallic element and partial non-metallic element in liquid sample (including the solid sample which can convert into a solution by chemical processing). The solution is placed into a plasma torch in the form of an aerosol. The sample will be evaporated and stimulated, and it will emit light with the characteristic wavelengths of its elements. Its spectral intensity is received by photoelectric element, converted to electrical signals and recorded by a beam-splitting by beam-splitting system.

  • Automated Conformal Coat Inspection

    FX-UV AOI - YesTech, Inc.

    Conformal coatings used by electronic manufacturers contain UV indicators for the purpose of inspection. Since coatings are transparent, units must be viewed under black light in order to verify coverage and non-coverage. The Nordson YESTECH FX-UV makes inspection of conformal coatings simple and convenient by automating the inspection process for quality, consistency and thickness of coatings under UV lighting with the use of proprietary inspection algorithms.

  • Automated Filter Tester

    3120 - TSI Inc.

    Automated Filter Tester 3120 meets NIOSH’s proposed Powered Air Purifying Respirator (PAPR) filter test requirements. It is an oil-only tester that has an airflow range of 100 to 200 L/min and can measure efficiencies up to 99.999%, or penetrations as low as 0.001%. In fact, Model 3120 uses the same proven oil-aerosol generator found in models 8127 and 8130. Like models 8127 and 8130, model 3120 features dual light scattering photometers that simultaneously measure upstream and downstream particle concentration to ensure fast, repeatable results.

  • 2U/3U Loads chassis

    H73003200 - 6TL Engineering

    This chassis can be customized depending on the specifications of the DUT, providing a simple and cost effective solution when loads are needed in your test strategy. Its limitation, due to the rigidity of the load values is compensated by the easy substitution of the chassis for another one with a different configuration. The loads rack can combine resistors with inductances and capacitor, or even active loads to, for instance simulate the thermal behavior of a light bulb filament.

  • 3-CMOS & 3-CCD prism-based RGB Area Scan Cameras

    Apex Series - JAI Ltd.

    JAI’s prism-based R-G-B cameras separate the incoming light into red, green and blue wavelengths, which are directed to three separate image sensors. The cameras deliver exceptionally accurate R-G-B raw image data ideal for demanding color machine vision applications across a range of industries including pharmaceutical, electronics, printing/packaging and imaging in microscopy and medical diagnostics equipment.

  • Analog/SD/HD/3G Advanced Test Signal Generator

    VSG-4TSG - Imagine Communications Corp.

    The Videotek® VSG-4TSG is part of the Imagine Communications Reference Sync and Timing platform, and is a ½RU wide, 1RU tall and 12 inches deep 3G/HD/SD master timing generator. The unit is small in size, with redundant power supply inputs, and is low in power consumption and light in weight, making it a perfect fit for all broadcast television and post production environments.

  • Blanket Testing Equipment

    TSM, T, SM & S Series - The Von Corp

    Automatic Testing rubber blanketsUp to 40,000V AC, 100,000V DC or both Allows Testing to ASTM D1048 and F479 StandardsThe TSM Series is The VON Corporation’s fully automated blanket test solution. Units allow testing of all standard rubber blankets, even class IV. Tests are timed and an audible alarm sounds failures or test complete, with bright flashing colored lights signaling which position failed or test complete. Four and Eight position models are available.

  • Brix Refractometer, Sugar Concentration & Refractive Index

    PA202 - MISCO Refractometer

    Dual-scale digital refractometer with scales for measuring both Brix (to 85) and refractive index (to 1.5000). Brix is a measure of sugar concentration and is used extensively in the agriculture and food and beverage industries. Refractive index is a fundamental physical property of a solution and is related to the speed light travels through it. Both the Brix and refractive index scales can be used to measure a nearly unlimited number of fluids.

  • Brush or Sponge Pilling Tester

    TF222 - TESTEX Testing Equipment Systems Ltd.

    Brush or Sponge Pilling Tester, to determine the pilling propensity and simulate normal wear of knitted and woven fabrics used in apparel and automotive interiors by brush and/or sponging specimens together in a circular motion to form pills. Specimens are evaluated under standard lighting conditions using a pilliscope, light cabinet or similar, against users’ standard fabrics or piling photographs.

  • Cable Fault Distance Locator

    Electrocon Systems

    Adopts international advanced electronic testing technologies and SCM technology.Is suitable for the precise range finding of power cable high resistance, flashover, disconnection, and low resistance faults.English menu, easy to master and use.TDR and Impulse current mode.Automatically computes fault distance.It can preserve 20 testing waveforms permanently,no loss after the shutdown,is a replacement of printer.Rechargeable nickel-metal hydride Batteries.Small size, light weight, and portable design.

  • Cable Tester

    PK-2018 PinMaster - Pansco, Ltd

    The PK-2018 has an easy-to-read light bars (TX/RX) for displaying test results on the main unit and 2 buttons used to access each function, it provides the necessary complete connectors to test the various cable types with no need for adapters and determines cable run length up to 300m and up to 4 cable locations by one operator at a time, makes testing accurate and more efficient.

  • Cable Burning Smoke Density Tester

    TF344 - TESTEX Testing Equipment Systems Ltd.

    Cable Burning Smoke Density Tester, to determine the smoke density of cables burning under defined conditions. This smoke density tester is used for horizontal burning of a cable or fiber optic cable, the smoke that is released from the flame combustion or no flame combustion condition, the light transmission rate of smoke can be used to compare different cable or judgment is in accordance with the specific requirements of the means.

  • Cable Core Identifier

    Bowden Bros Ltd.

    The Cable Core Identifier is designed to establish the phase rotation in an un-energised three phase H.V. Cable. Prior to jointing. This in expensive tool is very easy to use and effective, using three coloured LEDs to confirm correct connection. The Receiver is connected at the remote end, and continuity between phases is checked by changing the coloured crocodile connectors in accordance with the written instructions on the Transmitter.When all three LEDs light the phase connection is correct.

  • Detectors

    McPherson, Inc.

    Solar blind detector for operation in the 1 to 180 nanometer region. It is encased in a vacuum tight housing for vacuum operation. The Model 425 is ideal for measurements in the Extreme and Vacuum UV (EUV and VUV) where the solar blind feature eliminates potential interference from long wavelength ultraviolet and visible light. It may be operated in pulse-counting mode or DC. The CEM is also available with coatings like Cesium Iodide or Magnesium Fluoride to enhance response in different energy regions.

  • Differential Pressure Units

    1120 Series - Meriam Process Technologies

    Model 1120 Differential Pressure Unit is a proven and reliable sensing element used in all Meriam Bellows Gauges. It is available in ranges as low as 0-30 w.c. or as high as 0-500 PSI. The light weight and compact differential pressure unit incorporates a rupture-proof and leak-proof bellows plus other features that ensure ruggedness and reliability. This basic unit is suitable for activating indicators, recorders, transmitters, switches and controllers. It is also available as a separate assembly for that purpose.