Showing results: 286 - 300 of 458 items found.
-
8024 -
VECTOR Electronics and Technology, Inc.
3U x 160mm Eurocard size for 2mm Hard Metric connector. 3-Hole solder pads both sides. Pad and bus surfaces solder coated. Accepts cPCI 2mm J1 (25 row) & J2 (22 row) connectors on edge.
-
Dynamic Engineering
The PIM_Universal_IO facilitates rear panel IO in cPCI based systems using PMC's. The PIM_Universal_IO provides the PMC front panel IO where rear panel IO is desired. The PIM_Universal_IO can be used with any PMC implementing "Pn4" IO.
-
2U 84HP -
Kontron
Hartmann CompactPCI 2U system platform provides an intelligent, practical packaging solution for high-performance processors. The full width rack mount model provides a 4 slot 5V I/O 9U monolithic (6U cPCI) backplane for horizontal mounting of boards.
-
ACC-1 -
AIM GmbH
cPCI (3U) generic carrier card for PMC (PCIbus mezzanine card) with 1 PMC slot. Modular solution combines any AIM PMC module for AFDX®/ARINC664P7, ARINC429, MIL-STD-1553 or any standard 3rd party PMC module.
-
Eurotech Inc
*CompactPCI (cPCI) boards are 3U or 6U boards connected via a passive PCI (Peripheral Component Interconnect). Up to 8 boards can be connected together in a segment. Segments can be connected through bridges. *They are grouped into four categories: CPU, Communication, Input/Output, PMC carrier.
-
8020 -
VECTOR Electronics and Technology, Inc.
3U x 160mm Eurocard size for 2mm Hard Metric connector. Pad-Per-Hole and peripheral bus both sides. Pad and bus surfaces not solder coated. Accepts cPCI 2mm J1 (25 row) & J2 (22 row) connectors on edge.
-
SY7-CYCLONE -
ELMA Electronic, Inc.
SPE (Single Pair Ethernet) is a new emerging networking standard for many automotive and industrial applications. The EKF SY7-CYCLONE is a CPCI Serial FPGA board with front panel connectors for up to 20x100Mbps SPE ports. It can be configured as Ethernet NIC, switch, router, or gateway.
-
cBP-6105R -
ADLINK Technology Inc.
*PICMG:2.0 R3.0, 2.1 R2.0, 2.5 R1.0*Dimension (mm, WxH):120.9 x 262.05 (mm, WxH, vertical insertion view)*Segment:One*cPCI Bus:32-bit/33MHz*System Slot:Right-hand side (upper side for board's horizontal insertion)
-
cBP-6405R -
ADLINK Technology Inc.
*PICMG:2.0 R3.0, 2.1 R2.0, 2.5 R1.0*Dimension (mm, WxH):120.9 x 262.05 (mm, WxH, vertical insertion view)*Segment:One*cPCI Bus:Up to 64-bit/66MHz*System Slot:Right-hand side (upper side for board's horizontal insertion)
-
Data Patterns Pvt. Ltd.
Power supplies of various ratings for Air, Naval ground based and space applications are developed. Products are implemented in VPX, VME, cPCI and custom form factor designs.Most products qualified to requirements of MIL-STD-461C and MIL-STD-810D or the equivalent JSS 55555 are designed and manufactured. Airborne versions are designed to meet MIL-STD-704D. Specific design constraints are handled with respect to long time storage life and suitability for air cooled or conduction cooled applications. Designs suitable for high power supplies of various ratings for Air, Naval, Ground based and space applications are developed. Products are implemented in VPX, VME, cPCI and custom form factors designs.
-
Phillips Aerospace
Capabilities• VME, CPCI, VSX form factors• Differential pairs and controlled impedance• Matched length traces, trace guarding• Multilayer (designs to 26 layers completed)• Analog and designs (>6 GHz)• Column Grid Array, Micro-Ball Grid Array• Flex circuits
-
Bridgenorth Signal Processing
Data Acquisition and PlaybackPCI, cPCI / PXI : 32bit, 33MHz64 MB/sec data streaming2 OMNIBUS Modular I/O sitesExternal trigger & clockOn-board DDS timebase & timers/countersControlled from Windows or Linux based applicationHuge suite of C++ software componentsMMX optimized DSP analysis components
-
EA4-COUNTRY -
ELMA Electronic, Inc.
The EA4-COUNTRY is a 3U CPCI Express peripheral slot carrier card with up to x8 low-profile PCI Express connectors. Suitable for use in PXI Express systems.
-
CAES
Our SBCs come in a variety of form-factors and include extensive high-performance memory for code execution as well as non-volatile memories for boot image and data storage. System interface options are based on custom as well as standard Compact PCI (cPCI) or SpaceVPX/OpenVPX interfaces using standardized connectors.
-
1U 84HP -
Kontron
Hartmann CompactPCI 1U system platform provides an intelligent, practical packaging solution for high-performance processors. The full width rack mount model provides a 3 slot 5V I/O 3U cPCI backplane for horizontal mounting of boards. This system is designed with enhanced EMC features.