Showing product results. 1 - 15 of 31 products found.
-
Güralp Systems Ltd
Our borehole instruments can house both seismometer and accelerometer sensors or a combination of the two. They can also be strung together for vertical seismic profiling (VSP).
-
LaserFlow Ex - Teledyne ISCO
The LaserFlow® Ex velocity sensor remotely measures flow in open channels with non-contact Laser Doppler Velocity technology and non-contact Ultrasonic Level technology. The sensor uses advanced technology to measure velocity with a laser beam at single or multiple points below the surface of the wastewater stream. The sensor can be installed in hazardous areas defined as Class 1, Div 1, Zone 0 and ATEX category 1G.The sensor uses an ultrasonic level sensor to measure the level and determines a sub-surface point to measure velocity. The sensor then focuses its laser beam at this point and measures the frequency shift of the returned light.The LaserFlow Ex is ideal for a broad range of wastewater monitoring applications. With Teledyne ISCO's TIENet Barrier, it is compatible with both the Teledyne ISCO Signature Flowmeter and the 2160 LaserFlow Module, depending on the type of installation.During submerged conditions, flow measurement continues without interruption with optional continuous wave Doppler Ultrasonic Area Velocity technology.With its specially designed mounting bracket in place, the LaserFlow Ex can be deployed and removed from street level. This avoids the risk and expense of confined space entry. A variety of communication options enable programming and data retrieval from a remote location. Information about data quality can be recorded and transmitted with the flow data.Additionally, built-in diagnostic tools simplify installation, maintenance, and advanced communication options reduce its visits.
-
NMR-Mouse one-sided NMR - Magritek
The unique, powerful Profile NMR-MOUSE® probe works hand-in-hand with the Kea2 spectrometer. The Profile NMR-MOUSE is a portable, open NMR sensor equipped with a novel permanent magnet geometry that generates a flat sensitive volume parallel to the scanner surface. The system can measure *Proton density as a function of depth *T2 NMR relaxation times *T1 NMR relaxation times *Self-Diffusion coefficient of liquids
-
MS 1119 - Meltronics Systemtech
CPCI Based BTA is used to test ECM System Processor (80386 & 8051) Boards. This system consists of a Single Board Computer (SBC), CPCI RS422 Communication and Bus Interface Board (CBI), CPCI Digital Input & Output (DIO) Board and CPCI Analog Input & Output (AIO) Board to provide the necessary input/output signals to/from the board to be tested.
-
DDR200/300 NIR - McBain Systems
The McBain DDR200 NIR (for 200mm) and DDR300 NIR (for 300mm) provide high-speed defect detection and precision measurement on wafers and other parts. These cost-efficient systems offer unique advantages for both production and process development use, providing an optimum near-infrared (900-1700nm) solution when both subsurface defect detection and dimensional metrology are required.
-
ConnectFlow - Jacobs
Our ConnectFlow® software offers industry-leading capabilities in the representation of fractured rock hydrogeology and hydro-geochemistry.A variety of physics are supported to address a wide range of subsurface issues relating to geological disposal of radioactive waste, rock engineering, well performance, and assessing the migration and remediation of contaminants.A graphical user interface (GUI) provides users with advanced visualization tools that can be applied to a wide range of three-dimensional subsurface data formats; the GUI can also be used to construct and run ConnectFlow models from within the graphical environment.
-
Raptor - ImpulseRadar
The Raptor system covers a wide range of applications and can be configurated with 450 MHz or 800 MHz antennas. Raptor 3D Arrays are based on Real-Time sampling (RTS) technology and the unique antenna design is a milestone in the evolution of the GPR. A Raptor Antenna can be arranged in different ways, which allows for both standard and more advanced GPR measurements. These include common mid-point (CMP), wide-angle reflection and refraction (WARR) and Tomography.
-
35RDC - Evident Scientific
The handheld 35RDC is a simple Go/No-Go ultrasonic instrument designed to detect subsurface defects caused by impact damage on solid laminate aircraft composite structures. The 35RDC features a backlit LCD that displays the word GOOD if no subsurface damage is found or the word BAD when it detects subsurface damage.
-
WellBore Seal - LANDTEC
LANDTEC Wellbore Seal prevents gas leaks and air intrusion with an impermeable membrane that clamps onto a well casing and extends beyond the well bore. The impermeable barrier also allows landfill operators to us higher vacuum pressures at the wellhead with less concern about air intrusion and possible subsurface fires. Higher vacuums can help minimize emissions and subsurface migration.
-
Smartech Inc.
Magnetic Particle InspectionMagnaflux Magnetic Particles are used for magnetic particle inspection method in the detection of SURFACE and SUBSURFACE indications in FERROUS materials.
-
GEOSCOPE MKIV - 3d-Radar AS
The 3d-Radar GeoScope Mk IV Ground Penetrating Radar (GPR) raises the standard for high speed, high-density three-dimensional sub-surface imaging. The Mk IV is the fourth generation 3d-Radar GeoScope and further exploits the application of step-frequency technology to Ground Penetrating Radar. The Geoscope Mk IV enables high-density high speed 3D data capture with unique combination of deep subsurface penetration coupled to high resolution.
-
DCM Tech, Corp.
VERIFY SURFACE AND SUBSURFACE STRUCTURAL INTEGRITY IN: Industrial Crankshafts, Ferrous Parts, Aircraft Components, Landing Gear Components.
-
Teledyne Marine RD Instruments
Designed with unmanned and remotely operated vehicles in mind, the 600kHz and 300kHz compact DVLs can be packaged into small, portable, underwater vehicles. Additionally, these powerful DVLs can be leveraged for surface and subsurface manned and unmanned vessels.
-
Schweitzer Engineering Laboratories, Inc.
Underground faulted circuit indicators identify the faulted cable section without a time-consuming re-fuse and sectionalize process. Applications include subsurface or pad-mounted transformers, switchgear, sectionalizing cabinets, junction boxes, and splices.
-
ImpulseRadar
Condor is modern processing, visualisation and interpretation software for the efficient management of Raptor 3D GPR array data.Boost performance and improve workflows.- Efficient sub-surface imaging- Effective workflows- Simple and intuitive- Dedicated to processing Raptor data- Modern Windows software (64-bit)
