Showing results: 3136 - 3150 of 6646 items found.
-
EKT-100H -
Ektron Tek Co., Ltd.
Designed and manufactured in accordance with ASTM D2048& ISO 6502 standards. Output, displayed and memorized graphics including Elastic torque, Cure rate, and Upper/Lower dies temperatures. More than 30 items of data, such as ML, MH, TS, TC, CRI etc., couble be taken from each test. Cure curve provides the processing, vulcanizing, and vulcanized physical properties of rubber cross-linking reaction.
-
ONYX Apps
Oscilloscope for iOS is great for analyzing audio range signals, or learning oscilloscope measurement basics. The interface includes many standard oscilloscope controls, such as: triggering, time and voltage per division, signal measurement cursors, and more. The app incorporates a signal (function) generator capable of generating sine, square, triangle, and sawtooth waveforms of up to 22 KHz. Calibration to an external reference signal is supported, guaranteeing the accuracy of measurements.
-
T3DSO2354A -
Teledyne LeCroy
Optional Serial Bus Trigger and Decode options – I2C, SPI, UART, RS232, CAN, LIN which enables users to debug serial buses directly to their Oscilloscope on the T3DSO2000 series. While on the T3DSO2000A series I2C, SPI, UART, CAN, LIN Serial Bus Trigger and Decode options come as standard with optional CAN FD, FlexRay, I2S and MIL-STD-1553B also available on the T3DSO2000A series.
-
T3DSO2502A -
Teledyne LeCroy
Optional Serial Bus Trigger and Decode options – I2C, SPI, UART, RS232, CAN, LIN which enables users to debug serial buses directly to their Oscilloscope on the T3DSO2000 series. While on the T3DSO2000A series I2C, SPI, UART, CAN, LIN Serial Bus Trigger and Decode options come as standard with optional CAN FD, FlexRay, I2S and MIL-STD-1553B also available on the T3DSO2000A series.
-
T3DSO2204A -
Teledyne LeCroy
Optional Serial Bus Trigger and Decode options – I2C, SPI, UART, RS232, CAN, LIN which enables users to debug serial buses directly to their Oscilloscope on the T3DSO2000 series. While on the T3DSO2000A series I2C, SPI, UART, CAN, LIN Serial Bus Trigger and Decode options come as standard with optional CAN FD, FlexRay, I2S and MIL-STD-1553B also available on the T3DSO2000A series.
-
ATC121 -
Vadatech Inc
The ATC121 is a PCIe Gen3 Carrier Module. The ATC121 has an on board x16 PCIe Gen3 slot to accept any standard PCIe edge type module. The ATC121 comes with 32GB of ECC memory. It has dual on-board Display Port (DP) to DVI-D converter. The on-board processor provides DP output with dual GbE on the front panel. The ATC121 has an option for the TPM (Trusted Platform Management).
-
iguazio
The iguazio Enterprise Data Cloud platform supports simultaneous, consistent and high-performance access through multiple industry standard and Amazon-compatible streaming, as well as table, object, and file APIs. Users can ingest any type of data using a variety of protocols and concurrently read the data using a different method. For example, one application can ingest an event stream while another application reads that data as a table or file.
-
Series C710 -
Universal Switching Corporation
The Series C710 plug-in controllers are the key to our newer products including the advanced Series G2 product line. The C710 is available in three versions. The C710 is field upgradeable by attaching your PC to the Soft-Load port where it is possible to upload a new firmware package provided by the factory. All firmware upgrades are delivered with the required serial cable to connect between the Soft-Load service port and a standard serial port.
-
AMETEK Sensors, Test & Calibration
Our recorders are capable of storing gauge pressure, absolute pressure, temperature, current, and voltage. They can collect readings as quick as ten times per second, and can store up to 1 million data points. The included easy-to-use software communicates with the recorders and then saves the data into industry standard spreadsheets or tamper-proof pdf documents. With the nVision family, recorded runs can also be viewed on the graphical display of the unit itself.
-
2800 Series -
MicroSense, LLC
Many sensor heads, or probes, are available for use with our 4800 series and 8800 series capacitive position sensor. The resolution of our capacitive position sensors is determined by a combination of the active sensing area of the probe, the measurement range, and the measurement bandwidth of the electronics unit (demodulator). Please refer to the Model 4810 data sheet for complete details on probe selection, including mechanical dimensions of our standard probes.
-
Pulse Electronics
Pulse continues to lead the way with a broad range of components that enable twisted-pair copper high-speed services to homes and businesses. Pulse components are also used in cable modems and the consumer electronics that provide home networking services. Our high-performance transformers support home phone line and power line networks. These transformers are designed to exceed ANSI and ETSI standards, and have excellent THD performance and small footprints.
-
COMM-connect
The SafeOne is a RF Safety Monitor covering the requirements set forth in WHO ICNIRP specifications. It has a very wide frequency range covering 30MHz to 10GHz, which makes it suitable for use in almost all antenna installations. Due to the innovative lightweight design, technicians can wear this at all times, without the need to constantly be observant of the state of the instrument. The SafeOne is powered with standard batteries, with 250 days of continuous operation.
-
SICK Sensor Intelligence
With Safexpert®, SICK supports you with a thoroughly engineered solution for the demanding process of CE marking. Designers and managers will appreciate the systematic processes of this TÜV-certified software, with which it guides users through all the phases of CE marking, from risk assessment to the management of standards and documents. Safexpert helps designers to plan their path through the Machinery Directive transparently and logically, and then guides them efficiently along that path.
-
Futek Advanced Sensor Technology, Inc.
FUTEK S Beam Load Cells (Tension/Compression) offer a compact design for a variety of applications. Available in standard and metric, the S Beam Load Cell series provides accuracy, compact design features, overload protection (select models), and a wide capacity range to choose from. S Beam Load Cells are also commonly known as Z Beam Load Cells or S Type Load Cells.
-
E84 SPC -
Get Control, Inc.
300mm equipment manufacturers utilize this off-the-shelf E84 communications controller to provide SEMI E84 compliant communications for their products. With its built-in Load and Unload algorithms it is the perfect E84 communications solution for process tools, stockers, load ports, FOUP buffers, smart storage shelves and simulation load ports. The E84 SPC easily integrates with equipment controllers through a standard serial communications connection.
