Filter Results By:

Products

Applications

Manufacturers

Simulation

the approximation of actual operational conditions.

See Also: Simulators, Simulation Software, Simulation Testing, Modelling, Emulation


Showing results: 736 - 750 of 1370 items found.

  • Socket Tester

    1945 - Peaceful Thriving Enterprise Co Ltd

    This is a portable 220VAC socket tester to inspect the wiring conditions. The tester also features current variation for simulation of different leaking current. With the current variation, technician is able to test the condition of Ground Fault Circuit Interrupter (GFCI) / Residual Current Device (RCD) easily.

  • Walk-In/Drive-In Humidity Environmental Chamber

    Burnsco Environmental Test Chambers

    These custom designed chambers are used for testing large products, vehicles, or batch testing. They offer temperature and humidity simulation capabilities for climatic testing and temperature/humidity cycling whenever there is a need to simulate wide temperature and humidity extremes. They can be made almost any length, width or height.

  • Walk-In/Drive-In Temperature Environmental Chamber

    Burnsco Environmental Test Chambers

    These custom designed chambers are used for testing large products, vehicles, or batch testing. They offer temperature and humidity simulation capabilities for climatic testing and temperature/humidity cycling whenever there is a need to simulate wide temperature and humidity extremes. They can be made almost any length, width or height.

  • Vibration Analyzer

    DigivibeMX® M30 - Erbessd Instruments, LLC

    DigivibeMX® M30 System is the Vibration Analyzer, Dynamic Balancer and Data Collector with more functions in the market. From simple Vibration analysis to complex 3D ODS vibration simulations, DigivibeMX® M30 is the best tool for predictive analysis and diagnosis for your machinery.

  • Flexible Automatic Measuring System Release

    FAMS-R5 - Ono Sokki

    FAMS-R5 uses the system with high-speed communication, FAMS High-Speed Link2, to share data with each unit.Sensors can be directly connected to the measurement unit in a laboratory.Simple wiring and highly accurate measurement can be achieved.By adding the MCU that can calculate the control model with MATLAB/Simulink, it also supports the simulation bench.

  • Power Supply Rack For Climatic Cycling Test

    PSE Instruments GmbH

    One essential part of the module quality testing according to IEC 61215 is the thermal cycling test (MQT 11) and humidity freeze test (MQT 12). Besides the environment simulation in the climate chamber, it is necessary to energize the PV modules during specific parts of the test.

  • Electromagnetic Field Simulator

    EMPIRE XPU - IMST GmbH

    EMPIRE XCcel is one of the leading 3D EM field solvers for RF and microwave antennas, components, and systems. Due to its unique on-the-fly compilation it has proven to be the fastest simulation engine which allows the modeling of highly complex structures within minutes.

  • Signal Generator Software

    Rohde & Schwarz GmbH & Co. KG

    The software solutions for the class-leading signal generators from Rohde & Schwarz support various demanding applications. These include powerful radar simulation, the generation of digital I/Q signals supporting various radio standards as well as software tailored for multi-channel vector signal generator setups.

  • DC Electronic Loads

    LSG Series - Texio Technology Corp.

    *Operating Mode : C.V/C.C/C.R/C.P/C.C +C.V/C.R + C.V/C.P. + C.C.*High Precision, High Resolution (10 A),High Speed Variable Slew Rate (16A/ s).*Sequence Function for High Efficient Load Simulations.*Parallel Connection of Inputs for Higher Capacity. (With 4 Booster Units : Max 9.45kW or 4 Master Units)*External Channel Control/Monitoring via Analog Control Connector.*Program Mode to Create Work Routines for Repetitive Tests.*Multiple-Interface : USB 2.0 Device/Host and GPIB/RS-232C.*Adjustable OPP/OCP/OVP Setting.

  • Generates Test Cases on ICE

    TrekSoC-Si - Breker Verification Systems

    TrekSoC-Si automatically generates self-verifying C test cases to run on the embedded processors in SoCs in in-circuit emulation (ICE), FPGA prototyping, and production silicon. This verifies your chips more quickly and more thoroughly than hand-written diagnostics or running only production code on the processors. TrekSoC-Si's generated test cases target all aspects of full-SoC verification and work in a variety of different environments. TrekSoC-Si is a companion to TrekSoC, which generates test cases for simulation and acceleration. TrekSoC-Si extends the benefits of TrekSoC into hardware platforms.

  • LIN Interface Module

    C Series LIN - NI

    C Series LIN Interface Modules are bus interfaces for developing applications with the NI-XNET driver. The NI-XNET device-driven DMA engine couples the LIN bus to host memory to minimize message latency. You can import, edit, and use signals from LDF databases in integrated LIN databases. C Series LIN Interface Modules work well for applications requiring real-time, high-speed manipulation of many LIN frames and signals, such as hardware-in-the-loop simulation, rapid control prototyping, bus monitoring, and automation control.

  • Motion Control Solutions

    Data Device Corporation

    DDC offers a complete line of Synchro/Resolver instrument-grade cards and test equipment including angle position indication and simulation, plus a variety of hardware and software to meet today’s civil, military, and COTS/MOTS requirements. DDC is a leading supplier of Synchro/Resolver-to-Digital and Digital-to-Synchro/Resolver components—the smallest, most accurate synchro/resolver-to-digital and digital-to-synchro/resolver converters available today. Most of these single chip and hybrid converters are based on ASIC designs, yielding the most reliable and affordable converters ever offered, and are the building blocks for DDC’s card-level products.

  • Optical Forming Analysis

    ARGUS - GOM GmbH

    The forming analysis system ARGUS supports the optimization of the sheet metal forming process taking into account the correct material selection and the optimization of tools. This a decisive factor for competitiveness, particularly in the automotive industry. ARGUS provides full-field results with high local resolution for small as well as for large components. Therefore, it is ideal for numerous sheet metal forming tasks like: detection of critical deformation areas, solving complex forming problems, optimization of forming processes, verification of tools as well as verification and optimization of numerical simulations.

  • Range-Doppler Target Generators

    ATG9100 - Innovative Technical Systems

    The ATG-9100 is an example of a laboratory-quality instrument that will simulate complex target motion. Microwave signals from the speed camera enter the instrument through an integrated antenna which is then downconverted and digitized. Target simulation data is added to the digitized signal to provide range and Doppler information. The modified digital data is then converted back to an IF and upconverted to the original microwave frequency of the speed camera and radiated back through the antenna. Since the ATG-9100 can be phase-locked to an external 10 MHz reference standard, this instrument is suitable for use as a calibration standard for speed cameras.

  • Real-time Power Electronics Emulator

    HIL 6 series - Typhoon HIL, Inc.

    With 20 ns PWM sampling time, down to 500 ns simulation time step, and ultra-low latency, 6 Series processor has set the industry standard for ultra-high fidelity real-time emulation of power electronics systems. Simply plug your controller into a Typhoon HIL 6 Series real-time emulator, without any controller modifications, and take it for the most demanding test drive ever. Test any and all imaginable operating conditions, including faults. Automate and formalize test processes with our integrated software tools.

Get Help