Filter Results By:

Products

Applications

Manufacturers

Serial

a bus that can be used with almost any device transmitting a single stream of data.

See Also: Bus, Parallel, I2C, LIN, Camera Link, Can bus, ExpressCard, Fieldbus, FireWire, RS-232, RS-485, PCI Express, Serial ATA, Serial Peripheral Interface, SMBus, Serial Analyzers, Serial Digital Interfaces, Serial Communications, Serial Data


Showing results: 1351 - 1354 of 1354 items found.

  • 6U CompactPCI Quad Core Intel® Xeon® Processor Blade

    MIC-3397 - Advantech Co. Ltd.

    Advantech’s MIC-3397 is a 6U CompactPCI single board computer with a choice of server class processors based on the Quad-Core Intel® Xeon® E3-1125C v2(40W), with DH8900 chipset. The processor is based on Intel® 22nm 64 bit process technology, with up to 2.5GHz clock speeds 8MB L3 cache, Intel® Hyper-Threading, Virtualization, and Trusted Execution Technology, all of which enable the board for applications requiring higher levels of performance and security. The MIC-3397 supports dual channel ECC memory, up to 16GB DDR3 at 1333/1600MHz with max 8GB on board and 8GB SO-DIMM memory, three 2.5” Serial ATA interfaces (one on board optional with one 8 GB NAND flash, two to RTM),one Cfast slot, five Gigabit Ethernet ports (two on front panel, two to PCIMG2.16, two to RTM with one optional on the front panel), six USB2.0 ports (three on front panel, three to RTM), two VGA ports (one on front panel, one to RTM) on the 4HP model, three COM ports (one to front panel, two to RTM), one PS/2 port, and one PCIe2.0 x4 interface reserved for user define extensions on the rear transition module. MIC-3397 Series can be installed in a standard CompactPCI system slot as system master, or peripheral slot as stand-alone server blade without CompactPCI bus communication, it meets the needs of applications operating in harsh enviroments and is ideally suited for datacom, telecom and military applications. Its outstanding graphics capabilities make it a good choice for image-processing in medical, defense system and many other vertical segments applications.

  • Multiprotocol P104Plus Interface Board for Embedded Applications or Avionics Test & Simulation Applications

    EXC-4000P104plus - Excalibur Systems, Inc.

    The EXC-4000P104plus is a multiprotocol P104plus interface board for embedded applications or avionics test and simulation applications. Each board holds up to five independent modules. Two on-board modules use the MIL-STD-1553 communications protocol (M4K1553Px); another on-board module uses the ARINC-429 communications protocol; two additional detachable modules can be any one of the following types:M4K1553PxS (Single Function - RT validated) This module operates as a Bus Controller, Remote Terminal or a Bus Monitor. This module qualifies for airborne applications.M4K1553Px (Multi Function) This module operates as a Bus Controller, up to 32 Remote Terminals and as a Bus Monitor. Supports an Internal Concurrent Monitor in RT and BC/RT modes.M4K1553Px(S)-1760 Same as M4K1553Px(S) plus MIL-STD-1760 options.M4KMMSI Mini Munitions Store Interface module. Supports RT, BC/Concurrent-RT/Concurrent Monitor and Bus Monitor modes. Up to 8 hub ports EBR-1553 [10 Mbps 1553 protocol using RS-485 transceivers] and 1 monitor output.M4KH009 Based on our H009 family. This module operates as a Central Computer Complex (CCC) and/or up to 16 Peripheral Units (PUs) simultaneously, or as a Bus Monitor. In addition, a Concurrent Bus Monitor enables concurrent monitoring of the bus during CCC and PU simulation.M4K429RTx Based on our ARINC 429RxTx board. This module supports either five or ten ARINC 429 channels each of which can be configured in real time as a receive or transmit channel.M4K708 This module supports two channels of ARINC 708/453, each one selectable as either transmit or receive.M4KSerial This module supports up to 4 independent channels of serial communications, each of which can be selected as RS485, RS422 or RS232.M4KDiscrete This module supports 20 selectable input/open collector output discretes. The module supports TTL (0 to 5 volts) or avionics (0 to 32 volts) voltage levels.M4KCAN This module supports up to 6 independent channels of CAN 2.0B protocol with standard and extended message frames and message identifiers.

  • OpenVPX CPU Blade with 4th Generation Intel® Core™ Processor

    MIC-6311 - Advantech Co. Ltd.

    Advantech’s MIC-6311 is a single processor VPX blade based on the 4th generation Intel® Core™ i3/i5/i7 platform. It enables the highest performance available in 6U VPX form factor with two SRIOx4 ports in the VPX data plane and two PCI Express x8 gen. 3 lanes in the VPX expansion plane for workstation and compute intense applications. The two Serial RapidIO ports offer the possibility to interface the MIC-6311 to digital front ends such as DSP and FPGA cards via a high speed, low latency deterministic interconnect. In addition, PCI Express ports with up to 8GB/s throughput offer a high performance interface to mainstream peripherals and IO cards. With a SO-DIMM socket and additional soldered, onboard DRAM with ECC in a dual channel design running up to 1600MT/s, the MIC-6311 offers the ability to fit harsh environments while maintaining maximum memory throughput and supporting memory expansion using the latest SO DIMM technology. Moreover, the 4th generation Intel® Core™ processors offer increased cache size and efficiency as well as instruction set improvements which make the MIC-6311 a high performance compute engine with outstanding floating point and vector processing performance. Tailored for rugged environments, MIC-6311 has been designed to support ruggedized convection cooled heat sinks. Additionally, it implements an onboard soldered, industrial SSD for maximum reliability. By using the latest powerful PCH (Lynx Point) from Intel®, with its advanced SATA controller advanced storage options are supported such as a 2.5" SATA III HDD/SSD socket offering high storage capacity with up to 6Gbps transfer speed. A CFast socket provides an alternative for implementing a cost efficient, pluggable SSD. An onboard XMC/PMC site with PCIe x8 gen.3 connectivity can host high speed offload or I/O mezzanines. Two USB 3.0 ports in front panel can connect to the external devices with up to 5Gbps data rate. Network and remote connectivity can be achieved via a RS232 console (RJ45) and two GbE RJ45 ports, powered by Intel®’s latest Gigabit Ethernet Controiller, the i350. The processor’s integrated enhanced graphics engine Iris offers up to 2x the graphic performance compared to previous generation solutions. Triple independent display support can be implemented by using the MIC-6311’s VGA front panel port and two Display port / HDMI interfaces on rear transition modules. Audio port support via the backplane interface enhances media support. Three SATA ports (SATAIII) and four USB ports (2x USB 3.0, 2x USB 3.0) are also connected to backplane to fulfill the demand for extra IO ports or storage. Two GbE/ SERDES ports support system level IP connectivity and two UART interfaces can be leveraged to interface to legacy devices and consoles.

  • OpenVPX CPU Blade with 4th/ 5th Generation Intel® Core™ Processor

    MIC-6313 - Advantech Co. Ltd.

    The MIC-6313 is Advantech’s next generation single processor 6U VPX blade, based on the 4th/ 5th Generation Intel® Core™ and Intel® Xeon® Processor E3 Lv4 embedded platform. To enable the highest performance available in the 6U VPX form factor for workstation and compute intense applications, the four Serial RapidIO ports in the VPX data plane offer high speed up to 5Gb/s, low latency, scalable, error recoverable deterministic interconnectivity to digital front ends such as DSP and FPGA cards. In addition, two PCI Express ports x8 lanes in the VPX expansion plane, with up to PCI Express gen. 2 (5Gb/s) throughput offer a high performance interface to mainstream peripherals and I/O cards. With a SO-DIMM socket and additional soldered, onboard DRAM with ECC in a dual channel design running up to 1600MT/s, the MIC-6313 can be integrated into various harsh environments while maintaining maximum memory throughput, and supports memory expansion by using the latest SO-DIMM technology simultaneously. In addition, the 4th/ 5th generation Intel® Core™ and Xeon® E3 Lv4 embedded processors offer increased cache size and efficiency, as well as instruction set improvements, which make the MIC-6313 a high performance compute engine with outstanding floating point and vector processing performance. Tailored for harsh environments, the MIC-6313 has a native ruggedized convection cooled heat sink adaptable to various chassis environments; with the alternative optional air cooled heat sink, additional I/O is provided on the front panel. An onboard soldered, industrial SSD is included for maximum reliability, and a CFast/ SSD socket is also available for a costefficient, modular storage. By using Intel®’s powerful PCH (Lynx Point) with its advanced SATA controller, the MIC-6313 offers high storage capacity at up to 6Gbps transfer speed. An onboard XMC site with PCIe x8 gen.3 connectivity can host high speed offload or I/O mezzanines. Two USB 3.0 ports on the front panel can connect to external devices with up to 5Gbps data rate. Network and remote connectivity can be achieved via a RS-232 console (RJ-45) and two GbE RJ-45 ports, powered by Intel®’s latest Gigabit Ethernet controller. The next generation graphics engine Intel® Iris Pro offers up to 2x the graphic performance compared to previous generation solutions. Triple independent display support can be implemented by using the MIC-6313’s DVI front panel port and two DVI interfaces on rear transition modules. Audio is powered by a ALC892 controller via the backplane interface, and provides media support. Four SATA ports (SATAIII) and four USB ports (2x USB 3.0, 2x USB 3.0) are also connected to the backplane to fulfill the demand for extra IO ports or storage. Four GbE ports (two SERDES selectable) support system level IP connectivity, and four UART interfaces (RS232/422/485 selectable) can be leveraged to interface to legacy devices and consoles.

Get Help