Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing product results. 3121 - 3135 of 3277 products found.

  • Programmable, Autonomous, and Complete Vision System on Chip (VSoC) with Smart Image Sensor (SIS) Technology

    Eye-RIS VSoC - Teledyne e2v

    The Eye-RIS Vision System on Chip (VSoC) is a programmable, autonomous, and complete VSoC using Teledyne AnaFocus’ proprietary and patented Smart Image Sensor (SIS) technology. SIS technology extends the functionality of CMOS image sensors with the incorporation of image storage and advanced mixed signal processing capabilities per pixel. Thanks to this technology, Eye-RIS VSoC delivers image processing capabilities and speed comparable to a high end conventional vision system, yet in a compact size with low power consumption.

  • Isolation and Power Solutions

    Silicon Labs

    Silicon Labs' innovative digital isolation and power product portfolio includes CMOS digital isolators, isolated gate drivers, isolated current sensors, isolated system products and Power over Ethernet (PoE) families. These mixed-signal IC solutions leverage Silicon Labs' superior isolation and high voltage expertise to enhance power system performance, flexibility and reliability while reducing system size and cost. The entire isolation portfolio supports isolation voltages up to 5 kV.

  • Vision System on Chip (VSoC)

    Eye-RIS - Teledyne AnaFocus

    The Eye-RIS Vision System on ChipCMOS Vision System (VSoC) is a programmable, autonomous, and complete VSoC using Teledyne AnaFocus’ proprietary and patented Smart Image Sensor (SIS) technology. SIS technology extends the functionality of CMOS image sensors with the incorporation of image storage and advanced mixed signal processing capabilities per pixel. Thanks to this technology, Eye-RIS VSoC delivers image processing capabilities and speed comparable to a high end conventional vision system, yet in a compact size with low power consumption.

  • Low Input Bias Current Op Amps (≤100 pA)

    Analog Devices Inc.

    Low input bias current op amps are required whenever the difference of currents or voltage is small and needs to be measured accurately. These op amps are used so that the signal is not loaded down by the input of the op amps. Low input bias current op amps are critical for interfacing sensors in applications from photodiodes, pH meters, or other electrometer related functions to downstream electronics. Analog Devices has many precision op amps that fit the definition and range of these applications.

  • Condition Monitoring

    M+P International

    m+p Coda is a versatile monitoring system that captures and records signals coming from sensors such as accelerometers, thermocouples, strain gauges, and pressure transducers. Limit checking and alarm monitoring is provided for every active channel. The active channels are clearly displayed in a separate window, out-of-limit data can be seen at a glance. Alarm events are entered into a log file and can be reviewed at any time. You have the option to change the alarm limits online at any time without stopping the data acquisition.

  • 4-CH 24-Bit Universal Input USB DAQ Modules (OEM Version Available)

    USB-2401 - ADLINK Technology Inc.

    The USB-2401 is a 24-bit, 4-channel simultaneous-sampling universal input USB DAQ modules featuring built-in signal conditioning circuitry, providing direct measurement of commonly used sensors including current output transducers, thermocouple, RTD, load cell, strain gauge, and others. Individual channels can be programmed to measure different signal types. The USB-powered USB-2401 is equipped with removable screw-down terminals for easy device connectivity, and the included multi-functional stand fully supports desktop, rail, or wall mounting.

  • Interface converter

    ZET 7070 - ZETLAB Company

    Basic delivery scope with digital transducers for laboratory use includes the following: interface converter ZET 7070, power supply module 220V→ +24V, measuring line connector ZET 7001 (these components are mounted on a din-rail 300 mm); cable USB 2.0 A→B – length 1,8 m; terminal resistance 120 Ohm (for industrial use — steel plug); CD with  ZETLAB SENSOR software, enabling connection of up to 60 digital sensors; set of operational documentation.

  • Valve Diagnostic System

    QUIKLOOK 3-FS - Teledyne LeCroy

    Capable of testing all types of valves, the QUIKLOOK 3-FS Valve Diagnostic System acquires clean and accurate data, minimizes setup time, and maximizes ALARA. The powerful, flexible QUIKLOOK software provides a variety of diagnostic tools and time-saving features to simplify valve testing. Support for industry standard sensors as well as a large 15” touch screen and hot-swappable battery power provide convenient setup and easy operation. The QUIKLOOK 3 is a major advance in valve testing technology for the nuclear power industry.

  • PCTSTestr™ 50 Waterproof Pocket pH/Cond/TDS/Salinity Tester,

    Premium 50 Series - OAKTON Instruments

    Great for water, wastewater, laboratory or plant use, these multiparameter testers feature long-life pH electrodes with a wide range of sample compatibility. Pin-style conductivity sensors feature stainless steel electrodes for chemical resistance and durability. Replaceable sensor module saves you money by reusing the meter body. The testers bring the performance of your lab instruments out into the field. Advanced features include auto-shutoff, user-adjustable temperature coefficient, self-adjusting TDS and salinity factor, and low-battery indicator.

  • Industrial CANopen And CANopen FD Module For Digital I/O Applications

    PCAN-MicroMod FD DR CANopen Digital 1 - PEAK-System Technik GmbH

    The PCAN-MicroMod FD DR CANopen Digital 1 is an I/O module for use in CANopen and CANopen FD networks. The modern CANopen FD® standard makes it possible to cope with the constantly increasing need for data transmission from sensors, machines and complex production systems. The module has a CAN FD interface as well as 8 digital inputs and 8 digital outputs. With the DIN rail housing and the support of the extended temperature range, the module is suitable for use in an industrial environment.

  • Low-Noise DC Bias

    Pulse Instruments

    Imaging devices, such as CCDs, IR FPAs, and CMOS image sensors, require DC bias with very low electrical noise to prevent contamination of the image. Image quality can also be enhanced by carefully tuning each bias voltage to extract the maximum signal/noise ratio out of an array. Pulse Instruments has decades of experience providing DC bias supplies with the flexibility required tocharacterize and test a variety of devices while maintaining the noise immunity required for satellite and astronomy applications.

  • Scientific Cameras

    Thorlabs, Inc.

    Thorlabs' Scientific-Grade Cameras are specifically designed for microscopy and other demanding applications. The Zelux™ CMOS cameras have small footprints and provide cost-effective solutions for general-purpose imaging applications. Kiralux® cameras have CMOS sensors with high quantum efficiency in a compact housing and are offered in monochrome, color, NIR-enhanced, and polarization-sensitive versions. Our polarization-sensitive CMOS camera is ideal for materials inspection, flaw detection, and other advanced techniques using polarization. The Quantalux® monochrome sCMOS cameras are fast frame rate imagers that combine high dynamic range with extremely low read noise for low-light applications. They are available in either a passively cooled compact housing or a hermetically sealed TE-cooled housing. We also offer scientific CCD cameras with a variety of features, including versions optimized for operation at UV, visible, or NIR wavelengths; fast-frame-rate cameras; TE-cooled or non-cooled housings; and versions with the sensor face plate removed. An intuitive software package, API and SDK for developers, and third-party software support provide options for custom system control and image acquisition.

  • Temperature Data Acquisition

    THERMES-USB - Physitemp Instruments

    Physitemp’s Thermes high accuracy data acquisition system has been redesigned to create a more versatile USB model. The new system requires no internal connections to your computer and simply connects via an external USB port on your laptop or desktop computer. Two versions of the data acquisition system are available. The standard version, THERMES USB, is connected to your computer USB port. The wireless version - THERMES USB WFI, can be either directly connected to a USB port or, with the included wireless receiver, positioned up to 100 feet from the host computer. Each unit will accommodate up to 7 type T thermocouple sensors and multiple Thermes units may be connected to the same computer for more thermocouple inputs. A high accuracy electronic cold junction compensation circuit maintains typical system accuracy of ±0.2°C over an ambient temperature range of 15 to 35°C. Individual offsets may be added to each input in software to facilitate individual calibration of each channel. (see THERMES-USB WFI)

  • Gaming Platform Based on AMD Ryzen™ Embedded R1000/V1000 Series Supports up to Eight Independent Displays Including 4K UHD

    ADi-SA2X-RZ - ADLINK Technology Inc.

    ADi-SA2X-RZ all-in-one gaming platform features powerful processing and graphics performance for gaming infotainment and retail. Equipped with AMD Ryzen™ Embedded R1000/V1000 Series, the ADi-SA2X-RZ provides compelling graphics performance from a Radeon™ RX Vega Graphics and/or a PCI Express 3.0 x16 discrete graphics card together with multi-display support for up to eight independent monitors. With the powerful processing performance, advanced security functions, smart middleware solutions, and versatile I/O array, the ADi-SA2X-RZ fully satisfies the needs of your gaming application. The ADi-SA2X-RZ is a true application-ready gaming platform providing OEMs with a highly flexible and reliable all-in-one system that offers unparalleled portfolio of services that help developers save time and remain in compliance. The platform is designed to meet the GLI- 11 (Gaming Laboratories International) certification and all major global gaming market compliance requirements. The comprehensive middleware as well as the security and extensive I/O solutions enable developers to easily bridge applications with peripheral devices, sensors, and surrounding solutions up to central monitoring and control systems.

  • Temperature Data Acquistion

    THERMES-USB RF - Physitemp Instruments

    Physitemp’s original Thermes high accuracy ISA based data acquisition system has been redesigned to create a more versatile USB model. The new system requires no internal connections to your computer and simply connects via an external USB port on your laptop or desktop computer. Two versions of the data acquisition system are available. The standard version, THERMES USB, is connected to your computer USB port. The wireless version - THERMES USB WFI, can be either directly connected to a USB port or, with the included wireless receiver, positioned up to 100 feet from the host computer. Each unit will accommodate up to 7 type T thermocouple sensors and multiple Thermes units may be connected to the same computer for more thermocouple inputs. A high accuracy electronic cold junction compensation circuit maintains typical system accuracy of ±0.2°C over an ambient temperature range of 15 to 35°C. Individual offsets may be added to each input in software to facilitate individual calibration of each channel. For information on our wide selection of Type T Thermocouple temperature probes.

Get Help