Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing recent results 2701 - 2715 of 2820 products found.

  • Platinum RTD Sensor - PT100 - 3 Wire 1 meter long

    Adafruit

    For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0C, thus the name PT100. Compared to most NTC/PTC thermistors, the PT type of RTD is much most stable and precise (but also more expensive) PT100's have been used for many years to measure temperature in laboratory and industrial processes, and have developed a reputation for accuracy (better than thermocouples), repeatability, and stability.

  • Load Cells

    WIM Systems, llc

    The load cells are electronic weight sensors whose purpose is to receive the electrical excitation caused by a certain weight applied to the scale or scale and transmit it to a weight indicator. The load cell is an essential component in any scale or electronic scale and there are in different models and specifications. A Wim load cell is indispensable for a weighing system where accuracy, durability and a fair price are required. WIM-Systems manufactures a wide variety of load cell models, one for every need, as well as offering you all the advice you need You need to choose the model that best meets the particular needs of your weighing system and always with the support of WIM-Systems quality and technology.

  • Power Cell Power Transducers for Wide Ranging AC/DC Loads

    PH-3A and PH-1000 - Powertek LLC

    You can know the load on an electric motor by measuring the electric current going to the motor (Amps). But, this is not the best way to do it since a lightly-loaded motor doesn't use the electricity very efficiently. (In technical terms, the power factor is low.)A better way to know the load is to measure the motor power. (Power is measured in Horsepower or Watts.) Motor power gives you a straight line so it works well even when the motor is lightly loaded.The Power Sensors that we make measure the motor load (Horsepower or Watts) and send a signal to meters or computers. The operator can see what the status is on the meter or, the computer can make decisions.

  • Angle Position On-Axis

    ams AG

    The magnetic rotary position sensor product family detects the absolute angular orientation of an on-axis two-pole magnet rotating over the center of the IC. The absolute angular position can be provided in various formats, including PWM, ABI and UVW, or directly read through the host interface. According to the application’s requirements, resolutions from 8-bit up to 14-bit are available. This technology can be employed in high-accuracy angle position detection, high-speed rotation systems and brushless DC motor control. Any rotary magnetic position sensor can replace either absolute or incremental optical sensors, other magnetic and inductive technologies, potentiometers or magnetic switches.

  • Microseismic Reservoir Monitoring

    ESG Solutions

    Microseismic monitoring is a powerful regulatory and production optimization tool in use for oil field operations such as Enhanced Oil Recovery (EOR), carbon sequestration or natural gas storage. During such injection operations, maintaining the integrity of the reservoir is essential. Through our RESMAP® services, ESG has pioneered the use of passive seismic (microseismic) monitoring in long-term reservoir operations, to provide feedback on the reservoir integrity.  Using in-house manufactured downhole sensors and data acquisition equipment, ESG has installed permanent and temporary microseismic monitoring systems to provide life-of-field (LOF) monitoring for EOR operations and underground storage projects around the world.

  • Integrated Conditioning, Acquisition & Control System

    Series 6000 - Pacific Instruments, Inc.

    An innovative and fully integrated modular transducer conditioning, acquisition and control system, the Series 6000 has unparalleled performance and accuracy. From two to many thousands of channels, high & low speed, analog & digital, Series 6000 acquires measurement data from virtually all types of sensors and is fully customizable to fit the needs of any test facility. Large & small, AC & DC powered enclosures are available for nearly any test environment. Analog and digital I/O modules condition, amplify, filter and digitize signals from transducers. Turnkey and/or API software is available, helping facilities get up and running quickly.

  • Fluids Resistance Testing

    National Technical Systems

    NTS has extensive abilities in fluid testing. We’ve tested a large variety of products, from pipe fittings to process controllers, flexhoses to pressure vessels, valves to actuators, tank liners to heat exchangers, water to Skydrol. We have tested these products for a variety of measurements, from viscosity to flash point and auto ignition, among others. NTS fluids testing facilities are equipped with computerized data acquisition, reduction and analysis equipment for monitoring the functional characteristics of specimens during testing. NTS has considerable expertise in high flow testing of small devices – such as meters, indicators, totalizers, sensors, transmitters, and check valves.

  • Image Sensor/Fingerprint-on-Display Testing

    Enlitech

    Enli Tech provides the most advanced optical and non-destructive inspection technology, which can de-convolute the digital images back to the analog properties, such as quantum efficiency, spectral response, system gain K, Dynamic Range (DR), PRNU, DRNU, Linearity Error LE, and Chief-Ray-Angle (CRA). The testing solution can be applied to CCD and CMOS image sensors in aerospace, defense, and scientific camera field. Image sensor packages that can be tested by Enli Tech’s systems include bare wafers, dies, chips, or camera modules. Our image sensor testers can help users reduce the sensor-modules or camera-modules development time and RD budget.

  • Photo Detector Testing

    Enlitech

    With the rise of 5G technology and popularization mobile devices, more and more advanced photoelectric sensors are used in our daily lives. In order to be better applied to mobile devices, the photosensitive area of these advanced photodetector is getting smaller and smaller. However, these applications place higher and higher requirements on the light sensing performance of advanced photodetectors. In the process of shrinking the photosensitive area, it also brings the challenge of accurate measurement of quantum efficiency. Enlitech adopts the spatial light homogenizing technology and follows the ASTM standard “Irradiance Mode” test method, which is proven that it can accurately perform quantum efficiency and other key parameter measurements of advanced photodetectors.

  • Voltage Input Module For Remote I/O

    NI

    The Voltage Input Module for Remote I/O features 2-, 3-, and 4-wire spring terminal connection methods, a built-in power supply for sensors, four selectable input ranges, and simultaneous sampling. A remote I/O system consists of an EtherCAT bus coupler and individual modules mounted on a DIN rail. You control the Voltage Input Module for Remote I/O from a real-time controller, such as a CompactRIO Controller or an Industrial Controller. You can use remote I/O hardware to add low-cost I/O for simple tasks while your controller handles advanced tasks such as image processing, motion control, and high-speed or specialty measurements.

  • 16-Channel, 60 V, 8 Solid-State Relays, 8 Inputs, Ch-to-Ch Isolated Digital I/O Device

    USB-6525 / 779640-01 - NI

    The USB-6525 is an industrial, bus-powered USB I/O device that can automate even the most demanding applications. The solid-state relay outputs are ideal for controlling pumps, valves, motors, … and various other industrial actuators. The USB-6525 features channel-to-channel isolated digital inputs that you can use to read from industrial digital sensors, and eight solid-state relay outputs featuring 60 VDC/30 Vrms switching voltage and 500 mA per channel maximum switching current. Using programmable power-up states, you can configure the initial output states in software to ensure glitch-free, safe operations when connected to industrial actuators.

  • High-Performance Surface Plasmon Resonance System

    SPR-32 - Bruker Daltonics

    Features like ‘Frame Inject’ allows for turn-key sample processing protocols and customized workflows created together with pharmaceutical customers. The faster data analysis and highly intuitive user interface combine to deliver an industry-leading SPR throughput of 10,000 control-substracted binding measurements. Combining flexible 8-needle sample delivery with a 32-sensor detection array laid out in 8 detection flow cells, enables 4 sensors per flow cell, an important advantage for controlled, high-throughput SPR methods. The patented Hydrodynamic Isolation™ technology enables ‘Any Sample, Any Sensor, Any Time’, making it the preferred platform for screening, kinetics, thermodynamics and epitope mapping for pharmaceutical applications.

  • Automotive Sensor Test Bench

    Beijing Pansino Solutions Technology Co., Ltd.

    Support four common speed sensors such as wheel speed, engine speed, crankshaft and camshaft. *Support various forms of sensor testing such as active two-wire system, active three-wire system single power supply, and active three-wire system dual power supply. *The product is divided into two types: mother-and-child table type-multi-variety, small batch, typical cycle time 10s-15s. Turntable type-small variety, large batch, typical cycle time 6s-10s. *More than 10 years of manufacturing experience in automotive sensor test benches, providing professional test options in the industry to help you build a scientific test plan.

  • DC Magnetic Flux Leakage Testing

    ROTOMAT / TRANSOMAT Product Family - Foerster Instruments, Incorporated

    With the new generation ROTOMAT DA and TRANSOMAT DA flux leakage test systems FOERSTER is setting new standards in continuous quality assurance of ferromagnetic steel tubes. The test systems enable the reliable detection of natural and oblique defects, regardless of their angle or length, in addition to standardized longitudinal and transversal defects. The miniaturization of sensors together with highly integrated electronic components dramatically increases the number of channels. This makes a more precise and finer scan of the surface possible, giving a more complete set of information regarding detected defects. The newly introduced C-Scan visualizes these defects in high-definition and real-time, resulting in a completely new evaluation of the tubes to meet rising quality requirements.

  • LED Burn-In Test

    LXinstruments GmbH

    Burn-in system, based on LXI instrumentation, for concurrent testing of up to 80 DUTs in a climatic chamber. Devices to be tested include modern light emitting diodes and LED modules.The system consists of 2 control cabinets, each with 40 independent supply and measurement channels. Each channel can be configured individually via the operator software (current or voltage, including the relevant limit values). The software supports logging of current and voltage values for each DUT on all 80 channels with a sampling rate of <1s. Additionally, the software and system also support digital I/O channels, e. g. for controlling the climatic chamber. Inputs for connecting temperature sensors are also provided.

Get Help