Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing product results. 2551 - 2565 of 3268 products found.

  • Logger version chlorophyll and turbidity sensor with wiper

    INFINITY-CLW ACLW2-USB - JFE Advantech Co., Ltd.

    Infinity-CLW is an autonomously deployable data logger for long-term chlorophyll and turbidity measurements. The light sources (LEDs) of chlorophyll and turbidity sensors are highly stable, Minimizing the change over time. The instrument has a mechanical wiper that periodically sweeps to inhibit biological growth on the optical window. The turbidity sensor has a good correlation with SS (Suspended Solid) over the range. Infinity-CLW provides Highly accurate and long-term stable chlorophyll and turbidity data in oceans, rivers and freshwater.

  • MIMIC® MQTT Simulator

    Gambit Communications, Inc.

    MIMIC MQTT Simulator is a scalable, customizable, programmable,predictable, dynamic simulation platform designed to enable rapid development/ testing / deployment / tuning / training / demonstration of large-scaleInternet of Things applications. MIMIC creates a real-world, real-time test lab with thousands of IoTsensors, gateways and devices. It allows suppliers of MQTT sensors,devices, gateways, brokers and applications to design, develop and testtheir Brokers, Load balancers and clients using secured connections,in a virtual and scalable network environment.

  • Multiparameter Water Quality Probe

    Model GEO-AQUpro - Geónica, S.A.

    Up to 11 sensors (9 + temperature and pH ref) from the following list: Temperature, Optical Dissolved Oxygen, Specific Conductance, Salinity, Total Dissolved Solids (TDS), pH, ORP, Depth, Turbidity, Chlorophyll a, Rhodamine, Blue-Green Algae, CDOM / FDOM, Optical Brighteners, Tryptophan, Fluorescein, Refined oil, Crude oil, Ammonium, Nitrate, Chloride, Sodium, Total Dissolved Gas (TDG), up to 5 User Configurable Parameters (calculated e.g. TSS).

  • Pressure Comparators

    AMETEK Sensors, Test & Calibration

    Our high-pressure, hydraulic pressure comparators are portable, self-contained, hydraulic pressure generators for calibrating pressure gauges, transmitters, sensors, and safety valves. They are much faster than deadweight testers and most automated pressure controllers; and it’s so quick and easy to use, it’s ideal for calibrating those low cost gauges that are often overlooked for ISO9000 compliance. Each pump is available on its own, or in one of our complete ready-to-use pump systems.

  • Professional Scan Tools

    MOT Pro - Autel

    The MOT Pro offers a new level of capability for the professional user, at a price that other tools simply can’t match. Highly functional, the MOT Pro provides 50+ manufacturer coverage offering diagnostics on the most common modules such as OBD, Transmission, ABS, AirBag, Electronic Parking Brake, Oil Service Reset, BMS, some steering control sensors, climate, audio and others. The MOT Pro works with manufacturers up to 2012 with our patented upgradable software.

  • Pro Golf Swing Analyzer

    GSA Pro - 3Bays Corporation Ltd.

    Get the original 3Bays Pro golf swing analyzer on sale now while supplies last.The 3Bays Pro is the same size, weight and location of the 3Bays Zone and Putt, making it inconspicuous to your swing. Equipped with advance motion sensors, the 3Bays Pro digitize your swing motion and instantly delivers essential swing metrics with instant 2D swing plane playback to help beginner golfers gain the knowledge they need to improve their game, for less!

  • Quadrature Sensor

    SPECTEC Innovative Sensor Solutions

    DIGISPEC Hall Effect Quadrature Sensors provide two digital output signals, 90º out of phase to each other, detecting speed (down to true zero speed) and direction of rotation of gear teeth and ferrous targets. Gear teeth as small as module 0.10" wide can be sensed. Standard output is provided from a 2.2kOhm internal pull-down resistor to a collector, which can sink 25 mA. Open collector can be provided. Output is protected against reverse voltage.

  • Sea Spider

    Teledyne Marine RD Instruments

    ​​The Oceanscience Sea Spider is used by major oceanographic institutions across the world. It is designed for deployment of ADCPs, transponders, cameras, pressure sensors, wave gauges, CTDs and virtually any other type of compact oceanographic instrumentation package. The Sea Spider can carry multiple instruments and a pop-up buoy for diverless recovery. Gimbals are available for deployment on uneven sea floors. The Sea Spider has lead ballast feet and corrosion-free plastic clamps to protect your instruments.

  • Soil Moisture Sensor

    SoilWatch10 - Pino-Tech

    SoilWatch 10 is a soil moisture sensor which allows measuring relative water content in the soil. Our sensor does not have any exposed electrodes that usually corrode in resistive sensors. Whats more the reads will almost not drift over time or with temperature changes. Our sensor will give the same readings regardless of supply voltage. The sensor is weatherproof. It can be buried in soil for extended periods of time without adverse effects on accuracy or reliability. Designed to work with Arduino.

  • SparkFun MicroMod MikroBUS Carrier Board

    SparkFun Electronics

    The SparkFun MicroMod mikroBUS Carrier Board takes advantage of the MicroMod, Qwiic, and mikroBUS™ ecosystems making it easy to rapidly prototype with each of them, combined. The MicroMod M.2 socket and mikroBUS 8-pin header provide users the freedom to experiment with any Processor Board in the MicroMod ecosystem and any Click board in the mikroBUS ecosystem, respectively. This board also features two Qwiic connectors to seamlessly integrate hundreds of Qwiic sensors and accessories into your project.

  • Temperature Calibrators

    Fluke Corporation

    Fluke Temperature Calibrators simulate process sensors for testing temperature instrumentation. Specifically designed for the field, these lightweight compact tools are EMI tolerant, dust and splash resistant and offer an easy to use single push button interface. When paired with a temperature sensor they can take high accuracy temperature measurements to verify process temperatures and ensure the highest product quality and safety. There are a variety of different temperature calibrators designed for your unique calibration and testing requirements.

  • Thermocouples

    WIKA Alexander Wiegand SE & Co. KG

    Thermocouples are temperature sensors that generate a voltage directly dependent on temperature. Compared to resistance thermometers, they are particularly suited for high temperatures up to 1,700 °C. Instrument designs from mineral-insulated sheathed cable are very resistant against extremely high vibration loads (depending on instrument model, sensor element and wetted materials). The accuracy classes 1 and 2 apply for thermocouples in accordance with IEC 60584 as well as the standard and special classes in accordance with ASTM E230.

  • Ultrasonic Sensing MSP430™ Microcontrollers for Water‑‑MeteringApplications

    MSP430FR6047 - Texas Instruments

    Best-in-Class Ultrasonic Water-Flow Measurement With Ultra-Low Power Consumption. <25-ps Differential Time-of-Flight (dTOF) Accuracy. High-Precision Time Measurement Resolution of <5 ps. Ability to Detect Low Flow Rates (<1 Liter per Hour). Approximately 3-µA Overall Current Consumption With One Measurement per Second.Compliant to and Exceeds ISO4064, OIML R49, and EN 1434 Accuracy StandardsAbility to Directly Interface Standard Ultrasonic Sensors (Up to 2.5 MHz)

  • USB 3 Cameras

    IDS Imaging Development Systems GmbH

    Faster than fast: The IDS USB 3.0 camera families are inspiring! Equipped with the latest CMOS sensors from e2v, CMOSIS, ON Semiconductor and Sony the powerful cameras offer an excellent image quality plus a great wealth of additional features. Thanks to their USB 3.0 interface the industrial cameras offer up to 575 fps (depending on model). With a range of housing plus boardlevel variants to choose from, the CMOS cameras are the perfect fit for all applications.

  • Vacuum Leak Test Systems

    Cincinnati Test Systems

    Vacuum leak testing is the principal leak test method for testing parts that could have leakage from an external source into their housings and casings. Parts like underwater sensors or housings, outdoor electrical housings, sealed components, and components associated with vacuum sources are all prime candidates for vacuum leak testing. Operation of instruments that supply vacuum to test parts instead of pressure works in a similar, yet essentially opposite, manner as pressure decay testing.

Get Help