Showing recent results 2311 - 2325 of 2525 products found.
-
S654-HCHO - Huato Electronic co., ltd
S654 formaldehyde, temperature and humidity recorder Applied in to museums, libraries, laboratories, factories, farms, research and production, HVAC ect. USB communication interface to facilitate the analysis of data download. Comes with the switch button, low power consumption, using Switzerland imported temperature and humidity sensors,with high precision, stable and reliable.
-
CANape - Vector Informatik GmbH
The primary application area of CANape is in optimizing parameterization (calibration) of electronic control units. During a measurement process, you can simultaneously calibrate parameters and record signals. The communication between CANape and the ECUs takes place via protocols such as XCP or via microcontroller-specific interfaces with the VX1000 measurement and calibration hardware. CANape supports various ADAS sensors such as radar, LIDAR and video. Combined with high-performance hardware, CANape can store multiple gigabytes of data per second. Calibration data management and convenient measurement data evaluation including data management as well as reporting make CANape a complete tool for ECU calibration. Of course, CANape also provides access to bus data, diagnostic data and analog measurement data.
-
Qmax Test Technologies Pvt. Ltd.
Combination Board Tester capable of testing highly complex and dense PCBs employing various test techniques on a single platform. It can perform Board Level Functional Test through edge connectors of a PCB, and guided probe diagnostics utility to reliably repair Digital/Analog and Mixed Signal PCBs of various complexities and conventional PCBs. An In –Circuit device test by configuring Pin Drivers to High Current Pin Driver mode and interface to the UUT either through Clips / Probes or nail bed and on board clock disable HW feature are the all time favorite . The in-built high frequency 14bit Analog Driver / sensors synchronized with digital drivers for covering analog / mixed signal devices with high degree of accuracy.
-
MGM - Alpha Lab, Inc.
An improvement on the flux gate magnetometer, the DC Milligauss Meter measures magnetic fields (technically "flux density") up to several times the strength of the Earth field. It has a resolution of 0.01 milligauss (1 nanotesla) and a range of +/-2000 milligauss (200 microteslas). The meter's magnetoresistive sensor is a major improvement over an uncompensated fluxgate magnetometer both in cost and stability. In fact, this sensor approaches a proton precession magnetometer in temperature stability. However, at only 1 mm x 0.2 mm, the active sensor area is much smaller than fluxgate magnetometer or proton sensors. This allows very precise magnetic measurements in small areas (such as thin films) or with high gradients, when necessary.
-
XiB - XIMEA GmbH
*High speed interface with bandwidth of 20 GBit up to 64 Gbit / sec*CMOSIS / ams sensors: CMV12000, CMV20000, CMV50000*High image resolution and high throughput with 12 Mpix, 20 and 50 Megapixel*Speed of 133 - 333 Fps, 33 and 30 Fps respectively*Fast speed models with 1 Mpix at 3500 and HD at 2500 Fps*Robust PCI Express and Power/GPIO connectors*Integrated Canon EF-mount control with dynamic aperture and focus control*Support for Windows, macOS, Linux, ARM*Suitable for OEM customization and Embedded vision systems*Distances up to 300m over fiberoptic cable*Compact housing: 60 x 60 x 38 mm
-
Micro80Gen2 - Sofradir-EC
The Micro80Gen2 leverages the very best of the first generation ULIS 80 x 80 format thermal image sensors (including a fully digital system, high-quality imaging and low power consumption), while introducing valuable new features that are unique in the field of large-volume thermal image sensors.It is the first image sensor developed using a Ball Grid Array (BGA) package containingan integral lens holder setting a new standard for M10 mount optics. The Micro80Gen2offers unlimited potential for OEMs to create new experiences in either thermal handheld or stationery apparatus forgeneral thermal monitoring of machinery/industrial equipment, smart building technology/surveillance,(people flow/thermal activity for building energy systems )and others.
-
MemoRail Modbus A1405 - ALVI Technologies
With the increasing demand for a compact and flexible solution to liquid analysis –ALVI Technologies has responded with a new twist in the existing MemoRail. We are pleased to announce the release of our new MemoRail Modbus A1405 N- Dual Channel Multiparameter Analyzer with Modbus that offers an optimal solution for integrating a compact, flexible, all digital analyzer in an extremely cost-effective manner!! Our Dual Channel Multiparameter Analyzer with Modbus can be used with Memosens and digital sensors such as pH (glass and IsFET), ORP (redox), oxygen, and conductivity (conductive and inductive). It’s also the only analyzer in its class that is suitable for use with a digital optical oxygen sensor. All sensor types can be used in any combination in the dual-channel version.
-
EV76C664 - Teledyne e2v
Teledyne e2v’s Onyx family of image sensors are designed for the most demanding outdoor camera and industrial machine vision applications, where illumination budgets are restricted or where high-speed inspection is required.Teledyne e2v’s new Onyx EV76C664 is a 1.3 million pixel CMOS image sensor for low light applications. It has been designed using e2v’s advanced CMOS imaging technology and is ideal for many different types of application where premium performance imaging is required. The Onyx EV76C664 has an innovative pixel design which offers excellent performance in low-light conditions, but also caters for ‘all-light’ environments (typical of outdoor camera applications) where wide dynamic range is also needed.
-
Fraunhofer Institute for Telecommunications
The Department of Photonic Components is researching optochips and Photonic Integrated Circuits (PICs) for transmission and reception of more than 100 Gbit / s and the sensors. The department provides production and development services for all activitiesfor the German and international industry. If, for example, you already think of a particular optochip concept, the researchers offer additional advice and take over design and production steps. On the other hand, if you would like to start with a target specification, a feasibility study will begin and your own concept will be developed for you. Researchers are always ready and able to carry out initial production volumes in an ISO certified, qualified manufacturing facility. In addition, e-beam services and diffractive optical elements developed according to specifications are offered.
-
ARO-PR - JFE Advantech Co., Ltd.
The Portable optical DO meter makes use of the fast-response optical DO sensor RINKO, maintaining its high-speed response performance (99% response < 7sec). The meter probe is equipped with a temperature sensor close to the sensing foil, and the measurements are made by simply inserting the probe into a DO sample bottle (the calibration is carried out using the National Metrology Institute of Japan (NMIJ) certified traceable gases standards). Differently from galvanic electrode sensors, the instrument does not require water sample stirring or fixing reagents, since there is no oxygen consumption. Thus, the required time to estimate dissolved oxygen is considerably reduced. The display unit shows the output instantaneously, and you can check the measured values in real time.
-
CH-101 & CH-201 - Chirp Microsystems, Inc.
Tiny millimeter-sized ultrasonic Time-of-Flight sensor is 1/1000 the size of conventional sensors. Ultralow power ultrasonic sensor consumes only microwatts while performing ultrasonic echolocation. This enables always-on sensing for wake-on-approach application for tablets, notebooks, monitors, smart locks, security cameras, and other smart-home devices even when they are running on battery only. Chirp offers an easy-to-use ultrasonic software library (USL) that provides 2D and 3D position tracking using Chirp’s proprietary hardware. Chirp has developed proprietary and patent-pending gesture classification library (GCL) based on machine learning and neural network algorithms. Ultrasonic sensing solution provides millimeter-accurate range information.
-
ADLINK Technology Inc.
ADLINK USB DAQ modules leverage the expertise of ADLINK's analog design capability, enhancing convenience of data acquisition. Simply plug the ADLINK USB DAQ into a USB port on your computer or notebook for performance equaling or even exceeding that of ADLINK PCI/PCIe DAQ cards, with no need to power down or open the chassis. As well as providing basic voltage measurement, ADLINK USB DAQ modules feature built-in signal conditioning to directly receive measurement from most commonly used sensors, with no need for extra signal processing. From basic testing to high-accuracy measurement, from portable application to industrial automation, the ADLINK USB DAQ series delivers easy, efficient, and accurate measurement every time.
-
HTW5.2-127¸HTW5.2-136 - Hitachi, Ltd.
As is an inherent in the physics of a downwind configuration, the stronger the wind, the larger the clearance between the blades and the tower by blade flexion. This results in a lower probability of a tower hit. In case of stand still mode, downwind turbine switches to a free yaw operation mode and wards off the cross wind by the weather vane principle without yaw control even in case of black out conditions. This, in principle, reduces overturning moment to the foundation or floaters and maintains high degree of safety. That is important especially for offshore projects. Also, the wind sensors installed at the front of the blades give a more precise wind direction and speed in the upper stream. Yaw and blade pitch shall also be modulated to the right angle for more production.
-
9950 - Georg Fischer Signet
The 9950 Transmitter is a two channel controller that supports two sensors of same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, Conductivity/Resistivity, Salinity, Temperature, Pressure, Level, Dissolved Oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo® Signal Converter.
-
WiFi-201 - Neulog
The WiFi module is without doubts one of the most advanced and innovating elements of NeuLog. Measurements with NeuLog sensors can be performed through any device which uses the Wi-Fi technology, such as iPads and Tablets with Android, PC computers with Windows / Linux or Macintosh with OS. These can all communicate with the Wi-Fi adaptor to begin a unique experience of data acquisition.
