Filter Results By:

Products

Applications

Manufacturers

Showing results: 106 - 120 of 185 items found.

  • FT-NIR for Process Analytics

    QuasIR™ 2000E - Galaxy Scientific, Inc.

    Galaxy Scientific’s QuasIR™ 2000E is designed for continuous measurement of the chemical composition of material transported on a conveyor belt, through a pipe, or in a chute. Our unique external projection optics use high powered tungsten lamps to illuminate the sample from as far as 24 inches away and collect the scattered reflection off the sample through a fiber optic cable. The analysis spot size can be set as small as 0.5″ or as large as 8″ in diameter and can be custom tailored to applications needs.

  • Noise Source, 1 GHz up to 40 GHz

    346CK40 - Keysight Technologies

    The Keysight 346CK40 is the ideal companion to Keysight´s noise figure solutions when working on high frequency applications. Since it is broadband (1 GHz to 40 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source greatly reduces measurement uncertainty, which are commonly reflections of the test signals. This is a coaxial noise source with a 2.4 mm coaxial connector. ENR typically 14 dB at 1 GHz, decreasing to 5 dB at 40 GHz (typical).

  • Noise Source, 1 GHz up to 50 GHz

    346CK01 - Keysight Technologies

    The Keysight 346CK01 is the ideal companion to Keysight´s noise figure solutions when working on high frequency applications. Since it is broadband (1 GHz to 50 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty, which are reflections of the test signals. This is a coaxial noise source with a 2.4 mm coaxial connector. ENR typically 20 dB at 1 GHz, decreasing to typically 7 dB at 50 GHz.

  • Cable Analyzer

    E7000A - Deviser Instruments

    The E7000 Series of Cable & Antenna Analyzers provide all of the necessary measurement functions and performance to accurately diagnose and verify the site's cable feedline, connectors and antenna system, including signal reflections (return loss or VSWR), fault location (distance to fault), cable loss and RF transmission power in a lightweight, handheld instrument.

  • 1310/1550 nm Dual Laser Source Back Reflectiom/Power Meter

    GM8019 + GM83001E - UC Instruments, Corp.

    The UC INSTRUMENTS GM8019 + GM83001E 1310/1550 nm dual laser source back reflection meter and power meter is a compact, direct display instrument for the convinent measurement of backreflection, insertion loss and power connector, fiber optic components, and system. With a single output port, the meter is very easy to use and ideal for fiber cable jumper manufacturers.

  • Electro-Acoustic Test

    APx500 Series - Audio Precision, Inc.

    Whether evaluating the performance of loudspeakers, headphones, or microphones, electro-acoustic test can be challenging. In the case of loudspeakers and microphones, extraneous noises and reflections from surrounding walls and floors interfere with the measurements. Headphones present their own challenges, owing to the close coupling of earphones to the ears and the associated acoustic transmission paths. In addition to industry-leading analog performance and the widest array of digital options, APx500 Series analyzers offer fast, cost-effective electro-acoustic test of raw drivers and integrated audio products from the R&D lab to the factory floor.

  • Industrial Inspection Cameras

    General Tools & Instruments

    Industrial Inspection Cameras are our top-of-the-line inspection cameras. They feature glass lenses, superior optics, crystal-clear displays, and compatibility with the thinnest probes on the market. All Industrial Inspection Cameras were recently upgraded to capture VGA (640 x 480 pixel) resolution video clips and remove glare and reflections from them. All cameras in this sub-category are made in Taiwan, making them compliant with the Trade Agreements Act (TAA) of 1979a necessity for many buyers with the U.S. military and federal agencies.

  • Amplifier-separated Type Digital Laser Sensor

    LS-500 - Panasonic Industrial Devices Sales Company of America

    The LS-500 Series Amplifier-Separated Type Digital Laser Sensor offers high-class Laser Sensors able to detect very small objects with a processing speed of down to 60µs. The new full stainless steel M6 housing is robust and optimally suited for applications in harsh environments. The unique controller can handle Thru-Beam, Diffuse Reflection and Retroreflection Laser Sensor heads. All Sensors are equipped with two digital outputs, and cable-type Sensors offer an additional analog output, opening new dimensions in the detection of small objects.

  • 10 MHz to 55 GHz Noise Sources

    CNS346 Series - Spanawave Corporation

    The Spanawave CNS346 Series is designed for precision noise figure measurement applications. The superior VSWR characteristics reduce multiple reflections of the test signals and significantly increase the measurement accuracy of most noise figure set-ups. The CNS346 Series noise sources have broadband coverage and extremely good temperature and voltage stability, for the finest noise figure meter-compatible laboratory standards. Outputs of 6, 15.5 and 22 dB ENR are available, allowing the units to accurately measure noise figures up to 20 ,30 and 36 dB respectively.

  • Near Field Scanning Optical Microscope

    MCL-NSOM - Mad City Labs Inc.

    The MCL-NSOM is a fully operational near field scanning optical microscope. It has been built on Mad City Labs versatile RM21™ inverted optical microscope which allows users to convert between NSOM, SPM, and fluorescence optical microscopy techniques. The MCL-NSOM builds on our successful resonant probe SPM and incorporates common elements such as the MadPLL® phase lock loop controller. The NSOM also exploits our expertise in precision motion control by including six axes of motorized positioning, for the sample and NSOM probe, and three axes of closed loop nanopositioning to provide exceptional position resolution and accuracy. The MCL-NSOM also includes a 635nm laser excitation source, fiber launch, oil immersion objective lens (100x, 1.25 N.A.), CMOS alignment camera and avalanche photodiode detector. The microscope configurable design allows researchers to tailor the instrument for many different optical microscopy techniques including near field spectroscopy. The MCL-NSOM is operated in aperture mode with shear force feedback. The standard 5 modes are supported: illumination, collection, illumination and collection, reflection and reflection collection. We supply a LabVIEW™ based software package which automates the motion control features.

  • Reflection/Transmission Test Chamber

    CHTR-100 - Lisun Electronics Inc.

    When measure the surface spectral reflectance of all kinds of reflect mirror, metal, plastic and so on or the spectral transmission of glass and plastic, CHTR-100 Reflection/Transmission Test Chamber is mainly used to collect photometric and chroma energy, and then send the tested light signal to spectrometer or reflection and transmission photometer to get the color parameters via optical fiber or photoelectric detector.

  • Seismic Recording System

    DAQ3-3 - Seismic Source Co.

    The DAQ3-3 is the third generation of portable seismograph systems. The system can be configured as a stand-alone monitoring system, a refraction system or a distributed seismic reflection system. The DAQ3-3 has been designed for temporary or long term installations and can be monitored continuously or periodically, locally or remotely. External clock discipline via GPS Module, VHF/UHF radios or Wire enables usage in any environment.

  • Semiconductor Sensors

    CyberOptics Corporation

    Whether it’s for leveling, vibration, relative humidity, airborne particle sensing, teaching, or gapping, CyberOptics WaferSense and ReticleSense sensors for Semiconductor fabs and equipment OEMs are the world’s most efficient and effective wireless measurement devices. CEO, Dr. Subodh Kulkarni provides a view into the use of CyberOptics’ Multiple Reflection Suppression (MRS) technology in back-end and front-end semiconductor.

  • Fixed Attenuator

    FAXE - Elmika

    Fixed Attenuators are waveguide components for introduction of some particular attenuation value in to the waveguide network for signal leveling or reflection compensation. The attenuators have two types of design: with resistive plate in the waveguide diagonal plane or using coupling technology. The FAXE 3, 6, 10, 15, 20, 30 dB attenuators are available in waveguide bands from 18 through 225 GHz. The FAXE Fixed Attenuators can be used as laboratory Standards against which other instruments or devices are calibrated in case the parameters of these Fixed Attenuators are stable enough and were measured with appropriate accuracy.

  • TV Signal Generator

    Eiden Co., Ltd.

    This device is equips with the simulator. The following condition can be simulated. Non Liner: Non-linear assumed the satellite repeater - AWGN: C/N assumed the rain attenuation.- Phase Noise: Phase noise assumed the LNB - Frequency Drift: Frequency drift assumed the LNB- Echo: Reflection by the reception wiring and so on The MPEG-2 TS and the TLV (Type Length Value) can be transmitted. The test stream generator is equipped. Thus, the files can be rewritten through the USB2.0 interface. A seven-inches WVGA touch-panel is equipped. Thus, an excellent operation ability is provided. The remote control through the Ethernet is possible.

Get Help