Filter Results By:

Products

Applications

Manufacturers

Quality

ability to meet a specification.

See Also: Quality Assurance


Showing results: 4276 - 4290 of 5238 items found.

  • Single 8x12 1-Pole High-Density PXI Matrix Module

    40-520-103 - Pickering Interfaces Ltd.

    The 40-520 family of high-density PXI matrices is available in 22 different configurations with up to 256 crosspoints. The choice of six bus widths (x16, x12, x8, x6, x4 and x2) enables competitively priced solutions using Pickering Electronics instrumentation quality reed relays. These relays offer very long life with good low-level switching performance and excellent contact resistance stability. Typical applications include signal routing in ATE and data acquisition systems.

  • PXI 2A Multiplexer, 1-Bank, 64-Channel 2-Pole

    40-614-016 - Pickering Interfaces Ltd.

    The 40-614 High Density 2 Amp multiplexer module is available in 20 configurations. All configurations use high quality electro-mechanical signal relays allowing each channel to switch current up to 2A and voltage up to 200VDC/140VACThe module is suitable for signal routing in ATE and data acquisition systems. User connections are made via a front panel 160-pin DIN 41612 connector which is fully supported by our range of cabling and connector solutions.

  • Conductivity Meters

    GAO Tek Inc.

    GAOTek conductivity meters report the conductivity of a substance as an inverse function of resistivity. Resistivity is measured in ohms/cm, while conductivity is measured in mhos/cm. Our portable conductivity meters and testers are ideal for water conditioning, medical, beverage, laboratory, and other industrial applications. Our high-performance conductivity meters are reliable, high quality, accurate and affordable equipment that facilitate easy inspection and testing. They are compact,  portable instruments that allow a user to conveniently work in complex conditions in a lab or onsite.

  • Drop-Through Load Cells

    Instron

    Instron load cells are an integral part of the load weighing system of a testing machine. Their interchangeability along with transducer recognition and single point electrical calibration makes them easy to use. They maintain high alignment and are resistant to offset loading throughout the test, even with large sized specimens. Instron controls the design, manufacture and quality of all load cells, with customer applications in mind. They are certified in accordance with international standards for use in material testing machines only.

  • Thermal Imagers & Industrial Endoscopes

    GAO Tek Inc.

    GAOTek has developed advanced thermal imagers that are high quality, affordable, and accurate. Thermal imager is a non-contact temperature measurement device. It detects the infrared energy transmitted, reflected or emitted by all materials at a temperature above absolute zero. The energy factor is converted into a temperature reading or thermogram. Thermogram is the thermal image radiation produced that is displayed by the camera object emitting infrared energy. Thermal imagers are widely used for finding potential problems in applications across disciplines.

  • Handheld Advanced Photometer

    P7 - Evoqua Water Technologies LLC

    The handheld P7 Advanced Photometer measures up to seven parameters. A simple button layout, robust waterproof design and large backlit display make P7 Advanced Photometer easy to use and ideal for testing in the field, laboratory or plant room. The calibration and software based adjustment options mean that the unit is also suitable for use as a testing instrument. The units supply accurate, reproducible results using high quality interference filters with long-life LEDs as a light source.

  • Light Metering System

    Isolight - Peripheral Vision, Inc.

    Peripheral Vision has developed the Isolight and Isolight Color light metering systems. The Isolight combines four photopic light sensors, a 100-LED chaser display, a flexible chart holding system, and multiple mounting options. The Isolight Color replaces the Isolight's luminance-only sensors with four full-color RGB sensors for measuring both illumination color and brightness. Both the Isolight and Isolight Color will greatly accelerate image quality testing and enhance the accuracy of your measurements.

  • Materials, Structure, Surface, and failure analysis Services

    Materials Analysis Technology Inc.

    MA-tek provides wide span of materials analysis, structure analysis, surface analysis, and failure analysis. By technology segment, MA-tek provides 9 major service lines:1. Electrical Failure Analysis (EFA). 2. Physical Failure Analysis (PFA). 3. Structure Analysis. 4. Surface Analysis. 5. FIB Circuit Editing6. Reliability Testing. 7. Reverse Engineering of Benchmark Analysis. 8. IP Consultancy. 9. Quality Management Training Course.

  • Magnetic Flaw Detector

    CJX-A - Mitech Co., LTD.

    multifunctional magnetic flaw detector absorbed the advantages of similar products at home and abroad. With small size, light weight, easy operation, multifunction in one unit. The detector can equip A, D, O three types of probes to realize the functions of magnetic clamp detection, electromagnetic yoke detection, ring detection. It is the necessary detector to do flaw testing, quality control, safety check, life evaluation in the fields of petrol, chemicals, metallurgy, shipbuilding, aviation, railway etc..

  • Portable Gas Detection

    Honeywell Analytics, Inc.

    Ideal for confined spaces, spot leak testing and mobile use, Honeywell Analytics and BW Technologies portable gas detectors are marked by flexibility and quality. A variety of single or multi-gas detectors are offered in compact, lightweight designs— from simple alarm-only units to advanced, fully configurable and serviceable instruments. Applications include underground utilities vaults, boiler rooms, post-fire sites, sewers, industrial plants, industrial hygiene, first responder crews and remote fleets.

  • GPON ONT

    ONT-1GE-RF-W - Hangzhou Softel Optic Co., Ltd.

    ONT-1GE-RF-W is fiber to the home multi service access GPON ONT. It’s based on the mature, stable, high cost performance GPON technology and has gigabit Ethernet switching, WDM and HFC technology. ONT-1GE-RF-W has a higher bandwidth, higher reliability, easy management and good quality of service (QoS) guarantee with technical performance of equipment meet the ITU- T G. 984 requirements and have good compatibility with third party manufacturers OLT.

  • DC Power Supplies

    XG 850 - AMETEK Programmable Power, Inc.

    The Sorensen XG Series is an 850 Watt, 1U half-rack DC power supply. The XG Series is the new standard for powerful, programmable DC power systems. Designed for test, production, laboratory, OEM and quality assurance applications, the XG Series provides a wealth of features to ensure accuracy and greater efficiency. It puts clean, reliable power at your disposal and delivers stable, variable output voltage and current for a broad range of development, test and system requirements.

  • DC Power Supplies

    HPX Series - AMETEK Programmable Power, Inc.

    The Sorensen HPX series serves every major market and application that requires demanding test specifications, from industrial automation to material research to aerospace and satellite testing – providing engineers the flexibility they want with the capability they need all in one convenient and affordable system. The Sorensen HPX High Power Extensible, Programmable DC Series delivers unsurpassed quality and reliable low-noise performance, fast and precise programmability with premium features, all in a convenient rack-mount cabinet with casters.

  • Avionics Data Bus Tester

    Distributed CORVUS - DragoonITCN

    Distributed CORVUS works in conjunction with CORVUS-300 to isolate bus anomalies and fault resolution. The Transmit unit, C-9235-TX, sends 1553 like data pattern through a bus stub and coupler to the Receive unit, C-9235-RX, on another stub. This will measure insertion loss, possible bit errors and correct polarity. The Receive unit can also be used to give a digital scope representation of the active data bus showing signal quality and peak to peak amplitude.

  • Marking System

    Green Laser Series - PowerTECH Co,Ltd.

    Adopts the international advanced harmonic oscillated cavity design and laser control technology to realize that laser can obtain good beam quality under high power operation with high long-term stability and narrow laser pulse width. Special cavity inside heat compensation and harmonic conversion technology can realize doubled-frequency conversion of high efficiency. Suitable for laser trimming resistor thin film photovoltaic battery manufacture micro processing LED chip marking PCB.

Get Help